Help!!!!!!!! My XT890 does not start up!!!

[chocorock]

Hello guys... i save my phone from a brick, and then i tried to switch from BR firmware to french firmware (in order to upgrade to JB) using RDS, but when the rebooting process started, the phone stayed in black, it didn not power up... so, it does not start up yet, when i push power button, the green led turns on for a few seconds and then the phone get off... i can not enter into recovery mode either... just the green led shows up and so...

i hope someone can help me fixing this huge issue.

best regards!!!

 

[JeffLane]

Hello guys... i save my phone from a brick, and then i tried to switch from BR firmware to french firmware (in order to upgrade to JB) using RDS, but when the rebooting process started, the phone stayed in black, it didn not power up... so, it does not start up yet, when i push power button, the green led turns on for a few seconds and then the phone get off... i can not enter into recovery mode either... just the green led shows up and so...

i hope someone can help me fixing this huge issue.

best regards!!!

same trouble here :crying:

 

[HSD-Pilot]

AW: Help!!!!!!!! My XT890 does not start up!!!

I guess both of you wasn't unlocked. If that's the case you guys killed the Bootloader. No way to save it now.
You can't flash anything if you're not able to boot into AP.

Sent from my XT890

 

[Catweazle007]

I guess both of you wasn't unlocked. If that's the case you guys killed the Bootloader. No way to save it now.
You can't flash anything if you're not able to boot into AP.

Sent from my XT890

Same Problem by me, but my Razr-i was unlocked

 

[HSD-Pilot]

AW: Help!!!!!!!! My XT890 does not start up!!!

You had already updated to JB?
Even with an unlocked Bootloader you can't downgrade to ICS with RSD easily.

You have to remove the line gpt.bin & motoboot to flash an ICS Fastboot without an Brick. If you don't do that your Bootloader will be messed up and your Phone is dead.

Sent from my XT890

 

[smbr09]

help please!!

i have de same problem

when i push power button, the green led turns on for a few seconds and then the phone get off... i can not enter into recovery mode either


anyone know how to fix it or fix it already

thanks!! :crying:

 

[bighleo114312]

same problem here

im in mexico and i had the same problem, mine was because i went to jelly bean twice and on my third time i bricked it the only way to fix it was to take it to telcel(cell company)

 

[marcosx64]

warranty isue

im in mexico and i had the same problem, mine was because i went to jelly bean twice and on my third time i bricked it the only way to fix it was to take it to telcel(cell company)

You had the bootloader unlocked?
Telcel replace your xt890 or repair?
they make valid your waranty?

 

[luiz0512]

I have same problem

Sent from my GT-P1000 using xda app-developers app

 

[U1138]

You can try this: http://forum.xda-developers.com/showthread.php?t=2184877

 

[marcosx64]

You had the bootloader unlocked?
Telcel replace your xt890 or repair?
they make valid your waranty?

Finaly i get my xt890 from service, they (Telcel) dont charge me nothing ´
:victory:

new imei number
bootloader locked again

 

[bighleo114312]

You had the bootloader unlocked?
Telcel replace your xt890 or repair?
they make valid your waranty?

Marcosx64 yeap i got a new razr from telcel they couldnt fix it. And my waranty was valid because they cant see the message of unlocked bootloader.(i guess thats the reason).

 

[keog]

tried that but did not work, help please?

You can try this: http://forum.xda-developers.com/showthread.php?t=2184877

 

[cbys008]

My phone can enter fastboot

My phone can enter fastboot，“flash motoboot failed” with RSD, what can I do?I see motoboot the SBF inside. .Sorry, my English is poor

The beginning of time, the RSD can not read the phone, and then I try to use fastboot command Brush, brush into the boot file, brush system prompt bl file is too large, failed, and then I replace the computer, reinstall the system, RSD connected to the phone brushofficial SBF to the third step flash motoboot failed.I want to brush the official 4.1 GB was originally 4.0GB.How should I do it now？

 

[HSD-Pilot]

What Firmware are you trying and what Firmware where you running, before you messed up?
I hope for you that you're not on your way to flash ICS over JB.

Gesendet von meinem XT890 mit Tapatalk 2

 

[SharpnShiny]

I notice that a lot of the bricks posted in these threads (and PMing me) have often less than 10 posts. This suggests people sign up here, download firmwares, flash without reading anything and BOOM. That's clearly a serious cause of a lot of this.

There appears to be different kinds of bootloader problems, I'm not totally sure if some of these are dead or repairable.