[HELP] Odin fails in everything

[idomybest]

Hi there, everyone.

I had the Kit Kat 4.4.2 OMNI ROM the version that had problems with loop boot.

I tried installed 09-02 Gustavo_s kernel followed from this topic:
http://forum.xda-developers.com/showthread.php?p=50297932

And Im still having problem.

Installed the 20110310 pit-file and still get FAILED in Odin.

Installed an official ROM and still get FAILED in Odin.

I tried with 1.5.33 drivers version and returned to 1.5.27, still having problems.

Tried with Odin 3.09, 3.07, 3.04 and having FAILED problems, except for 1.87 that I have "stuck" problems.
It keeps doing without finishing it, maybe it is in a loop...

What can you do or am I doing it wrong?


p.s.: it has a bootlop in TWRP and LOGO and enters in Download Mode

Please, a little help.

Thanks in adv

 

[MistahBungle]

Same as everyone else who has problems with an Odin flash; Hopper8's 'Odin troubleshooting' guide stickied in the General section, try all the stuff in that thread as many times as you need to in order to get a successful flash.

 

[bhavstech]

Hi there, everyone.

I had the Kit Kat 4.4.2 OMNI ROM the version that had problems with loop boot.

I tried installed 09-02 Gustavo_s kernel followed from this topic:
http://forum.xda-developers.com/showthread.php?p=50297932

And Im still having problem.

Installed the 20110310 pit-file and still get FAILED in Odin.

Installed an official ROM and still get FAILED in Odin.

I tried with 1.5.33 drivers version and returned to 1.5.27, still having problems.

Tried with Odin 3.09, 3.07, 3.04 and having FAILED problems, except for 1.87 that I have "stuck" problems.
It keeps doing without finishing it, maybe it is in a loop...

What can you do or am I doing it wrong?


p.s.: it has a bootlop in TWRP and LOGO and enters in Download Mode

Please, a little help.

Thanks in adv

in which step in odin does it show failed?

---------- Post added at 07:23 AM ---------- Previous post was at 07:21 AM ----------

Hi there, everyone.

I had the Kit Kat 4.4.2 OMNI ROM the version that had problems with loop boot.

I tried installed 09-02 Gustavo_s kernel followed from this topic:
http://forum.xda-developers.com/showthread.php?p=50297932

And Im still having problem.

Installed the 20110310 pit-file and still get FAILED in Odin.

Installed an official ROM and still get FAILED in Odin.

I tried with 1.5.33 drivers version and returned to 1.5.27, still having problems.

Tried with Odin 3.09, 3.07, 3.04 and having FAILED problems, except for 1.87 that I have "stuck" problems.
It keeps doing without finishing it, maybe it is in a loop...

What can you do or am I doing it wrong?


p.s.: it has a bootlop in TWRP and LOGO and enters in Download Mode

Please, a little help.

Thanks in adv

install a kernel with cwm then perform a FULL WIPE then try flashing stock use another odin...or try to restore any nand backup

 

[gsainath4u]

My steps to fix this issue would be
1. Try with different USB ports.
2. Uninstall the Samsung driver and connect while device is in download mode. Let the drivers install themselves (on Windows 7 and above)
3. Try with a different PC.

I had the same issue. Used Odin v1.85.
When it did not work, I uninstalled the driver and let it install on its own.
When I tried again, this time the Odin flashed successfully and I could boot my phone.

PS: The newer builds of OmniRom have this bootloop issue fixed.

 

[MistahBungle]

And your steps are covered in Hopper's stickied thread. The whole point of having such a comprehensive thread that covers every possible situation stickied is so everyone doesn't have to regurgitate the same crap over & over for n00bs who are unable to manage something as basic as searching for info that's been covered countless times here before, let alone fix their busted phones.

 

[idomybest]

in which step in odin does it show failed?

---------- Post added at 07:23 AM ---------- Previous post was at 07:21 AM ----------


install a kernel with cwm then perform a FULL WIPE then try flashing stock use another odin...or try to restore any nand backup

Above Odin 1.87, it gives FAILED in a "NAND Wirte Start" stuck, it doesnt complete the task

I tried Siyah s2 5.0.1, Dorimanx and Gustavo_s Kernels and I dont get anything

My steps to fix this issue would be
1. Try with different USB ports.
2. Uninstall the Samsung driver and connect while device is in download mode. Let the drivers install themselves (on Windows 7 and above)
3. Try with a different PC.

I had the same issue. Used Odin v1.85.
When it did not work, I uninstalled the driver and let it install on its own.
When I tried again, this time the Odin flashed successfully and I could boot my phone.

PS: The newer builds of OmniRom have this bootloop issue fixed.

I know about OmniRom new releases, but this ****ed it up.

I already had USB-Flex problems, bought the new Flex and changed it by my own.
The USB now is fully working, the problem is the Flash that I cant make.

By the way, it is a good point to uninstall the driver and let Windows decide.
Well, just uninstall or do anything more?

And your steps are covered in Hopper's stickied thread. The whole point of having such a comprehensive thread that covers every possible situation stickied is so everyone doesn't have to regurgitate the same crap over & over for n00bs who are unable to manage something as basic as searching for info that's been covered countless times here before, let alone fix their busted phones.

Search and read is easy, fix is hard. Someone already said a phrase like this one.

Many people had the problem I have, but it is not about the SAME problem, exactly one.

If you are mad, mate, dont be.

I tried 4 differente USB cables (2 genuines), 6 different USB ports, 3 different kernels, 2 different ROMS, 1 3-part ROM and 1.3, 1.4, 1.83, 1.84, 1.85, 1.87, 3.04, 3.05, 3.06, 3.07 and 3.09 ODIN versions and Im still having the problem.

EDIT: forgot to mention, I tested 1.4.103, 1.5.27.0 and 1.5.33.0 version of USB Drivers too

This not only about a "n00b asking for help with basic searching in the forum".
Please.

 

[gsainath4u]

I know about OmniRom new releases, but this ****ed it up.

I already had USB-Flex problems, bought the new Flex and changed it by my own.
The USB now is fully working, the problem is the Flash that I cant make.

By the way, it is a good point to uninstall the driver and let Windows decide.
Well, just uninstall or do anything more?

Just uninstall the existing drivers and don't install any driver.
Put the device in download mode and then connect to the PC. It will auto install any required drivers.

After the device boots up, the PC will again install the necessary drivers, if required.

 

[idomybest]

Just uninstall the existing drivers and don't install any driver.
Put the device in download mode and then connect to the PC. It will auto install any required drivers.
After the device boots up, the PC will again install the necessary drivers, if required.

The news is that, now, my phone bricked and I dont know how. Actually.

I tried, in the last case, the PIT, got failed, reboot it, got into Download Mode, it was working. Then I turn it off. And it wont turn on again. Well, its get hot, but dont show anything. Bricked.

Maybe a motherboard replacement or I dont know if JIG Usb would help

 

[AshishSoni]

The news is that, now, my phone bricked and I dont know how. Actually.

I tried, in the last case, the PIT, got failed, reboot it, got into Download Mode, it was working. Then I turn it off. And it wont turn on again. Well, its get hot, but dont show anything. Bricked.

Maybe a motherboard replacement or I dont know if JIG Usb would help

You shouldn't have used previous versions of Odin to flash latest roms/kernels. That bricks the phone.

Is your phone still in warranty period? Maybe you can get it replaced before they could figure out that you flashed custom kernel.