Help: press any key to shutdown in fastboot

[machikaa]

This worked for me and I hope the same goes for you all as well (
without using USB HUB and USB 2 port
).

I found the solution here .

Scenario:
1) Phone not detected with fastboot devices command
2) Phone goes into "Press any key to shutdown"
3) Just download this .bat file and run it as administrator
4) Remove your phone, get it back into fastboot mode (Power + Volume Down), connect it again
5) Open CMD and try to run any fastboot command & they'll run successfully.

P.S.: I too got my POCO F1 unlocked by using this with the modded MI Unlock app. Was tired of trying usb hub and extension thing though my PC is intel and not amd. It'll be happy to know how and what made it worked from technical aspect. Thank You.

 

[Louk_Magic32]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

You saved my life! I spent 6 HOURS searching for the damn fastboot errors! God bless you!

 

[KSSKTEJA]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

Oh my god dude you are a rockstar, it worked for me <3 Thank you so much!

 

[francisco.leandro]

Isso funcionou para mim e espero que o mesmo se aplique a todos vocês (
sem usar HUB USB e porta USB 2
).

Eu encontrei a solução aqui.

Cenário:
1) Telefone não detectado com o comando fastboot devices
2) O telefone vai para "Pressione qualquer tecla para desligar"
3) Basta baixar este arquivo .bat e executá-lo como administrador
4) Remova o telefone, coloque-o de volta no modo de inicialização rápida (liga / desliga + diminuir volume) e conecte-o novamente
5) Abra o CMD e tente executar qualquer comando fastboot e eles serão executados com sucesso.

PS: Eu também desbloqueei meu POCO F1 usando-o com o aplicativo MI Unlock modificado. Estava cansado de tentar hub USB e coisa de extensão embora meu PC seja Intel e não AMD. Ficarei feliz em saber como e o que fez funcionar do ponto de vista técnico. Obrigado.

Salvou minha vida, muito obrigadooo!!

 

[shafi1885]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

poeple, who have switched between usb port 2 & 3 but still didn't work , run this script as administrator removing second bracket saving as bat file. It worked for me and my friend also.
worked on : windows 10, amd ryzen 5 3600
worked for: mi 9 se, poco phone f1

and really really thank you for this code. <3

 

[techolik]

Mate, in most cases, this is the issue of MIUI Fastboot not being compatible with USB 3.0 ports. The solution is to use a USB 2.0 port instead or, in cases where you only have USB 3.0 ports, connect the device through a USB hub and you are good to go.

You are an living angel! I was doubtful cause the hub I have is USB 3, but it helped

 

[TheCarlJohnson]

Run this Fix as admin for users facing following issues ( for AMD Ryzen, Intel users running windows )

1. Press any key to shutdown

2. Not detecting on mi flash / mi flash unlock tool / fastboot tool

3. Usb 3.0, 3.1 not detecting

Find the file below :
USB fix



File source :

Pocophone F1 | OFFICIAL

Pocophone F1 | Official Group • Read rules, English only • Our Channel: @PocophoneGlobalUpdates • Our OT group: @pocoofftopic • Our Customization group: @XiaomemeCustomization • Our Photography group: @PocophonePhotography

t.me

 

[nishantpansuriya]

New laptop and the same problem. Solved with HUB USB.

Thank you so much man, solved with usb hub, idk how but yeah it worked for me. 07-07-2021

 

[nobody24]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

bro ;-; i love you bro Thank you soo much

 

[Saurav372]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

Thanks

 

[dadadam9999]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

thank you sir, the only solution that works for my android

 

[Cybereu]

New laptop and the same problem. Solved with HUB USB.

This solved for me !

God bless you.

 

[Vishal1272]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

Thank you legend!

 

[Detlas' Legacy]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

Thank you you absolute legend!

 

[[email protected]]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

Thanks it works for me

 

[florescasonny]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

Thanks for the solution mate.

 

[tiklupxxda]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

it works on USB 3.0 but can someone explain the reason???

 

[samashok]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

Thank you, it works

 

[unboxparadigm]

try this solution：
use a USB 2 port
create a new txt file,write code in the { } below
{
@Echo off
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f


pause
}
then save this file and rename it as a .bat file
right click and run as administrator.
after that the issue can be fixed

Just made an account so that I could say thank you. Have a good day

Edit: The device was a Poco F1 and the PC was AMD based (not sure if that has got anything to do with it). Either way, USB 2.0 and this .bat file did the job for me. Hoping to breathe some life in to my aging Poco F1 with the Pixel Experience Rom. Fingers crossed.

 

[juniorhero]

New laptop and the same problem. Solved with HUB USB.

thanks this worked for me for Realme 2 pro