Question HELP - Realmeflash.exe "cannot find central directory"

Search This thread

Sayp

Member
Jul 13, 2022
10
0
I recently unbricked my GT ME using this flash tool only. Realme flash tool doesn't support AB partition & dynamic partition table. It is the only working tool to flash through fastboot. After flashing completion change slot

fastboot getvar current-slot

fastboot --set-active=a or b

fastboot reboot
You are literally the biggest chad on this planet.
It's been a week and I had tried everything except changing the slot AFTER i flashed.
Repair guy couldn't do anything, I was about to just buy a new motherboard and I did what you said and the phone booted, thank you so fking much dude
 

izanCR

New member
Aug 1, 2022
1
1
Hello, I have been trying to do everything you have been saying but no solution has worked for me. My phone is a Realme 6 pro (rmx 2061)
The official realme tool gives me an error saying: cannot find central directory. I have also tried with the tool OppoRealme-OFP-Flash_1.0.exe
but it gives me all failed. I tried to do the slots but it seems that my phone is not compatible with these slots. I can't access recovery or anything so I have to do everything in fastboot. Every time I try to charge the phone directly, fastboot comes out and it doesn't let me start the system or do anything at all. If you could help me I would be very grateful.




1.png
WhatsApp Image 2022-08-01 at 5.31.25 PM.jpeg
 
  • Like
Reactions: cutecrocodile

cutecrocodile

Senior Member
Sep 5, 2015
123
15
Quetta
It's very easy !

1. You download the latest firmware
2. You put your phone in fastboot mode
3. You connect your phone with the original cable to an available port on your motherboard
4. You open the "OppoRealme-OFP-Flash_1.0.exe"
5. You choose the "most logical" options

The files will install one by one and you may get a lot of errors!

Leave it, the program will continue and at some point there will be a "super" file which will take a long time to install (30 minutes), you wait and then you will see your phone restart as if it were brand new ! 😊
which region should i select for this file
RMX3363GDPR_11_C.08_2022062322010228.ofp
 

cutecrocodile

Senior Member
Sep 5, 2015
123
15
Quetta
I already did, I have this command line that appears instead !

View attachment 5618873

When I launch the program for slot A, it's very random when it blocks !
On the image, it's xb1_config_a which bug !
And when I close the window, it gives me success before it disappears !

View attachment 5618879


In general, I have 50% success and 50% failed !

The furthest file that gave me the bug is the "super" file !
Apparently it is cut into 5 parts with the OFP extractor.
the final thing i am getting is

EXTRACTING: super
EXTRACT ERROR: Error on super's. OFP super partiton might be broken!

Done. ofp file flashed with success!
Press Enter to continue...

and what to do after this?
 

cutecrocodile

Senior Member
Sep 5, 2015
123
15
Quetta
You are literally the biggest chad on this planet.
It's been a week and I had tried everything except changing the slot AFTER i flashed.
Repair guy couldn't do anything, I was about to just buy a new motherboard and I did what you said and the phone booted, thank you so fking much dude
can you please tell me step by step what to do? i am not able to unbrick my device
 

cutecrocodile

Senior Member
Sep 5, 2015
123
15
Quetta
The problem was in Windows it was of the type lite :ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO:
Hello, I have been trying to do everything you have been saying but no solution has worked for me. My phone is a Realme 6 pro (rmx 2061)
The official realme tool gives me an error saying: cannot find central directory. I have also tried with the tool OppoRealme-OFP-Flash_1.0.exe
but it gives me all failed. I tried to do the slots but it seems that my phone is not compatible with these slots. I can't access recovery or anything so I have to do everything in fastboot. Every time I try to charge the phone directly, fastboot comes out and it doesn't let me start the system or do anything at all. If you could help me I would be very grateful.




View attachment 5675095View attachment 5675097
same problem, but device is rmx3363
 

cutecrocodile

Senior Member
Sep 5, 2015
123
15
Quetta
for any who is bricked use this and u will be good to go
extract all from the DOWNLOADED FIRMWARE using mct_ofp_extractor
copy all adb fastboot and adb files in that folder
open cmd in that folder
paste all given below commands there
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot --disable-verity flash vbmeta_vendor vbmeta_vendor.img
fastboot reboot fastboot
fastboot flash abl abl.img
fastboot flash cpucp cpucp.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash engineering_cdt engineering_cdt.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot flash my_carrier my_carrier.img
fastboot flash my_company my_company.img
fastboot flash my_engineering my_engineering.img
fastboot flash my_heytap my_heytap.img
fastboot flash my_product my_product.img
fastboot flash my_region my_region.img
fastboot flash my_stock my_stock.img
fastboot flash my_bigball my_bigball.img
fastboot flash oplusstanvbk oplusstanvbk.img
fastboot flash qweslicstore qweslicstore.img
fastboot flash shrm shrm.img
fastboot flash system_ext system_ext.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash vm-bootsys vm-bootsys.img

finally fastboot reboot
 
  • Like
Reactions: Almasd

fluna83

Member
Sep 4, 2022
5
0
Tuxtla Gutiérrez, Chiapas
Guys I messed up, I installed Android Studio with it SDK platform and tools and everything, but now when I try to open the oppo flash exe it asks me for the 3 options at the begining but when Its going to start to flash then another CMD window popups, run a lot of commands then closes, does anyone know what should I uninstall to be able to use the OPPO FLASH tool?

EDIT
Here is the new problem
1662334120526.png

=( anyone knows why this opens another CMD window?
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Hello everyone !
    I am French and my English is very bad so I will use Google translation to communicate with you!
    This is what is happening.
    Without doing it on purpose, I flashed the original boot with the unofficial TWRP one!
    Since then, I can no longer use my phone and I no longer enter the RUI3 interface.
    I used Realmeflash.exe to reinstall the firmware and it gives me an error message "cannot find central directory".

    Sans titre.jpg

    Do you know how to solve this problem?
    Thank you for your help !
    1
    I had the same problem you gotta get the MCT OFP extractor tool and QFIL, you extract everything with the MCT tool and then use QFIL to flash but the super.img is broken up into multiple files which I Have no clue how to merge so I'm stuck for now but if I get it working I'll be sure to tell you
    1
    @kamubendi
    I posted the problem on this page too !
    https://c.realme.com/in/post-details/1525231625514856448
    If it can help for the future 😊
    1
    I recently unbricked my GT ME using this flash tool only. Realme flash tool doesn't support AB partition & dynamic partition table. It is the only working tool to flash through fastboot. After flashing completion change slot

    fastboot getvar current-slot

    fastboot --set-active=a or b

    fastboot reboot
    1
    I already did, I have this command line that appears instead !

    View attachment 5618873

    When I launch the program for slot A, it's very random when it blocks !
    On the image, it's xb1_config_a which bug !
    And when I close the window, it gives me success before it disappears !

    View attachment 5618879


    In general, I have 50% success and 50% failed !

    The furthest file that gave me the bug is the "super" file !
    Apparently it is cut into 5 parts with the OFP extractor.
    Every partition flashes in both slots except super partition. Super partition only flashes in inactive slot, that's why u need to change the slot. Super partition flashing takes around 25 to 30 minutes you need to be patient. & After flashing check slot and change it