Hello its possibile help for visualization rear camera video with ownice k7 . I have installed in renault kadjar with ISO cable and canbus but rear camera dont start when i insert rear gear thanks
-
We are moving to xdaforums.com!
Posts made between now and when the migration is complete will not be carried over.
You will be automatically redirected once the migration is complete.
HELP REAR CAMERA OWNICE K7
- Thread starter sergente78
- Start date
no in my opinion the 32pin iso cable where the original rear camera cable passes is not well wired because I saw that there is no power to the rear camera. we have to find the problem and solve it. if you succeed let me know how you solved.
I haven't had any results yet. Maybe you should try pairing the canbus first. It installs an extra app with car setup options.
But I have tried in vain so far, there are too many choices. Although I found my car on one of the models, I didn't get the picture of the reversing camera.
The seller's response today is:
"Did you connect the Cam in port on our power cable to the Rear camera input port on RCA cable."
Of course there is no RCA, there is a canbus.
Hi, is your hu with 360? If so, then k7 will use the 360 cam instead of your existing cam. The reverse cam will only work if 360 app is not running. Try restarting the hu while in reverse. Then as the hu boots the reverse cam will show at for a few seconds.
If hu did not come with 360, then check the reverse cam type.
The rca connector is in B harness not power. It is brown color. Then if you have canbus, it should be automatic. Make sure your reverse cam is terminated properly ie. Power and ground.
If hu did not come with 360, then check the reverse cam type.
The rca connector is in B harness not power. It is brown color. Then if you have canbus, it should be automatic. Make sure your reverse cam is terminated properly ie. Power and ground.
i have TEST YOUR SOLUTION, i don't have 360 camera , i have CANBUS WITH BROWN CABLE but i when insert rerar gear not appear. if i open app for vision cam the message is NOT SIGNAL.
i have test at connecting at aftermarket cam and i see image in app. where is the problem of my original cam??
i have test at connecting at aftermarket cam and i see image in app. where is the problem of my original cam??
No, there is no 360. But only part of the problem is that there is no reversing camera image!
Unfortunately, nothing works about CANBUS, only the left side of the steering control.
The seller also sent a picture of the camera connection. I repackaged the radio, checked it, everything is as pictured! It also sent about CANBUS type selection, but it is.
No door opening, no radar, no air conditioning, nothing ... Who doesn't have a reversing camera, do the other things work?
I have write to winlink ownice and the result is the camera original not work and seller send me a camera sony! When arrive i test
The problem for me is in the canbus decoder not support rear camera original. Because the original camera is 6v but radio send 12v
Considered installing a voltage regulator and using the factory camera, like for Toyota models?
The knockoff won't be a Sony...
For me, Toyota C-HR hybrid is my car. Unfortunately, nothing works about the CAN BUS, not just the factory reversing camera. But I think the Toyota camera is 12V. Now I’m there for the seller to contact the engineer to see if the smooth and hybrid CHR require the same CAN BUS. (There is a different type of hybrid in the Factory menu.)
Today i have test some solution but not work. I have connect rca cable cam at other rca radio connector VIDEO OUT and the video of rear camera when I open apk AUX is work!!! But if I connect to rear camera rca and positive on pin 4 radio back the cam enter in rear vision but not see image. Repeat i connect rca cable cam to AUX VIDEO and red wire Cam ON positive and image work good but I connect rear cam rca at RCA CAM INPUT OF RADIO and red wire at pin. N4 of radio the display on the rear camera but not image!!!! Help for me
Has the promised camera arrived? Now they promised me one too. I hope this already works, although I would have preferred the original to work!
Funny mixture of topics here.
You need +12 V on the reverse cable of your head unit as soon as you in reverse gear. This is just to tell the hu that you're in reverse. You can grab the reverse signal from can bus box or from the wiring harness of your car. Use a multimeter to verify if you get the 12 V. Search for the pin description of the original OEM radio.
You need +12 V on the reverse cable of your head unit as soon as you in reverse gear. This is just to tell the hu that you're in reverse. You can grab the reverse signal from can bus box or from the wiring harness of your car. Use a multimeter to verify if you get the 12 V. Search for the pin description of the original OEM radio.
I have connect +12v at my rear camera but when inseet rear gear start camera but not video, if I connect camera at 12v battery camera work good !
Similar threads
