[help] s4 mini duos i9192 keeps boot looping t_t

[Zaran6217]

Hey guys, i am having a boot loop problem here

First I must tell what happened , my phone fell, and suddenly it reboots , giving me some kind of update or recovery thing (it happened in a matter of seconds) , then hung up completely!! I found out I had a hard brick ..in that time, he did not want to turn on anyway , no matter what I did , but then I found the topic of how to make a partition on the SD card with a debrick.img , it worked perfectly , the phone started , but only the model logo !! I tried to install many Rom's in Odin mode ( can not go into recovery mode ) and I have tried many things and he remains in stuck in this boot loop !! ( I also know it's not the hardware, the USB plug looks good, and the phone does not turn on when I remove and put the battery again )

can u guys help me here?

 

[Zaran6217]

Anyone? please i need help heree T_T

 

[Davidich]

Can you go in download mode?

 

[Zaran6217]

Can you go in download mode?

ohhh thanks god T-T
yup, only the download mode, i try flashing a lot of stock roms downloaded on sam mobile, i believe my phone is ZTO ( brazilian one).. still, its succeeds on flashing trough odin, no errors ,but its not working

 

[Davidich]

Can you post the log file?

 

[RuffBuster]

Have you tried wiping data and cache AFTER installing ROM? I once flashed a Brazilian ROM and this is what I had to do to stop it boot looping.

 

[Zaran6217]

Can you post the log file?

Sure:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> system.img.ext4
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> NON-HLOS.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Also, when i get in odin:
PRODUCT NAME: GT-I9192
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: ENABLE

i've been tried flashing a lot of ROM's like these :
I9192UBUBND2_I9192ZTMBND1_ZTM
I9192UBUCOB1_I9192ZTOCOB1_ZTO
I9192UBUCOC2 Brasil_ZTO 4.4.2
I9192UBUCOC2_I9192UUBCOC1_TPA
I9192UBUCOC2_I9192ZTOCOC1_ZTO
I9192UBUCOC2_I9192ZTRCOC2_ZTR
I9192XXUAMF7_I9192SERAMF7_SER

and i've tried recovery modes like philz and clockwork, bootloaders and PIT files, i donno what version are these, cu'z i think they are an official files for a specific model , right?

 

[Zaran6217]

Have you tried wiping data and cache AFTER installing ROM? I once flashed a Brazilian ROM and this is what I had to do to stop it boot looping.

there is a way to wipe data and cache in download mode? how?

 

[RuffBuster]

Sorry forgot you can't get into recovery? Can you?

---------- Post added at 07:54 PM ---------- Previous post was at 07:51 PM ----------

Sorry forgot you can't get into recovery? Can you?

If not try pulling the battery out and holding power for 30 seconds, then leave the phone to test without battery for a short time. Then with battery back in try entering recovery from off. It's worth a try.

 

[Zaran6217]

Sorry forgot you can't get into recovery? Can you?

No, i tried a lot.. it's appears the "recovery booting" after i pressed the button's , and it keeps reseting

 

[SilviuMik]

Sorry forgot you can't get into recovery? Can you?

No, i tried a lot.. it's appears the "recovery booting" after i pressed the button's , and it keeps reseting

I can give u an modified rom that also wipes data on first boot.
But i think your flash memory got corrupted
Did u try to flash from another PC ? Another USB cable ? Another USB port / Another Windows ? .
Refresh page in 5 mins
Download I9192XXUCOA2_I9192ROMABC1_I9192XXUCOA2_SILVIU.tar.rar
Extract *.rar and flash md5 with Odin 3.10.7

 

[Zaran6217]

Sorry forgot you can't get into recovery? Can you?

---------- Post added at 07:54 PM ---------- Previous post was at 07:51 PM ----------



If not try pulling the battery out and holding power for 30 seconds, then leave the phone to test without battery for a short time. Then with battery back in try entering recovery from off. It's worth a try.

Didn't work, also, the phone wont start's without the battery ( with usb plug connected or disconnected)

 

[Zaran6217]

I can give u an modified rom that also wipes data on first boot.
But i think your flash memory got corrupted
Did u try to flash from another PC ? Another USB cable ? Another USB port / Another Windows ? .
Refresh page in 5 mins
Download I9192XXUCOA2_I9192ROMABC1_I9192XXUCOA2_SILVIU.tar.rar
Extract *.rar and flash md5 with Odin 3.10.7

yeah, i tried on an windows 8.1 and 7, nootbook and pc.. downloading the file, thanks

 

[Davidich]

It's strange because if you flashed a stock rom why you have CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM. If you have an antivirus try to disable it...sometimes works

 

[Zaran6217]

I can give u an modified rom that also wipes data on first boot.
But i think your flash memory got corrupted
Did u try to flash from another PC ? Another USB cable ? Another USB port / Another Windows ? .
Refresh page in 5 mins
Download I9192XXUCOA2_I9192ROMABC1_I9192XXUCOA2_SILVIU.tar.rar
Extract *.rar and flash md5 with Odin 3.10.7

Hey dude, didn't work same thing

heres the odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> NON-HLOS.bin
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

 

[Zaran6217]

It's strange because if you flashed a stock rom why you have CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM. If you have an antivirus try to disable it...sometimes works

yeah, no antiviruses .. on pc or nootbook.. :crying:

 

[Zaran6217]

i am seriously thinking on send this phone for a jtag guy to solve this, it's kind difficult to find someone who have that equipment in brazil, anyone got more suggestions?

 

[Davidich]

Try jtag but if your emmc get broken i think it will not resolve the problem

 

[Zaran6217]

Try jtag but if your emmc get broken i think it will not resolve the problem

really? :crying: what if i change the motherboard? now, i don't got any ideas anymore

 

[Davidich]

really? :crying: what if i change the motherboard? now, i don't got any ideas anymore

Yes it will resolve the trouble..