(Help)Samsung N9005 Stuck on Samsung Logo with the led blinking

Mobita

Senior Member
Mar 6, 2016
120
10
0
Lisboa
Hi guys, I have an issue with my phone and I´ll be glad if you guys can help me! the issue is after I install stock rom from sammobile (TPH from Portugal version 5.0 Lollipop my device is unlocked) by odin I stay stuck on samsung logo with animation logo and led blinking. The flash ran without problems getting pass message on green in odin screen, so the phone boots up shows me a model after that the samsung logo with animation and stuck there. when I see that the phone dont boot and stuck on there, I try to enter on recorevy mode and I can't go inside to make a wipes, the phone just reboot again. So I try to a download mode to make reflash of rom and I cant enter too. I dont know what to do right now. When I plug the phone on pc MTP cant install but in odin its reconized the phone. CAN ANYONE HELP ITS MY DAYLY PHONE

thanks in advance :)

the log of odin is this

<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOK6_N9005OXXGBOJ2_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> modem.bin
<ID:0/008> NON-HLOS.bin
<ID:0/008> recovery.img
<ID:0/008> rpm.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> sdi.mbn
<ID:0/008> system.img.ext4
<ID:0/008> tz.mbn
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/011> Added!!
<ID:0/011> Removed!!
 

Yumiko87

Senior Member
Jul 18, 2016
1,939
619
0
Malaysia
Hi guys, I have an issue with my phone and I´ll be glad if you guys can help me! the issue is after I install stock rom from sammobile (TPH from Portugal version 5.0 Lollipop my device is unlocked) by odin I stay stuck on samsung logo with animation logo and led blinking. The flash ran without problems getting pass message on green in odin screen, so the phone boots up shows me a model after that the samsung logo with animation and stuck there. when I see that the phone dont boot and stuck on there, I try to enter on recorevy mode and I can't go inside to make a wipes, the phone just reboot again. So I try to a download mode to make reflash of rom and I cant enter too. I dont know what to do right now. When I plug the phone on pc MTP cant install but in odin its reconized the phone. CAN ANYONE HELP ITS MY DAYLY PHONE

thanks in advance :)

the log of odin is this

<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOK6_N9005OXXGBOJ2_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> modem.bin
<ID:0/008> NON-HLOS.bin
<ID:0/008> recovery.img
<ID:0/008> rpm.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> sdi.mbn
<ID:0/008> system.img.ext4
<ID:0/008> tz.mbn
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/011> Added!!
<ID:0/011> Removed!!

Try unplug battery and let it boot to screen after 5minutes.
If still same try boot to download mode and reflash by untick the autorestart.
 
  • Like
Reactions: Mobita

Mobita

Senior Member
Mar 6, 2016
120
10
0
Lisboa
try to boot the phone without batery?
still every time the same thing samsung animation logo and blue led blinking. I do a combination and the phone boots normaly until logo. once it arrive at logo just keeping with animation and led noting else appears
any idea?
 

Yumiko87

Senior Member
Jul 18, 2016
1,939
619
0
Malaysia
still every time the same thing samsung animation logo and blue led blinking. I do a combination and the phone boots normaly until logo. once it arrive at logo just keeping with animation and led noting else appears
any idea?
What I mean it's make sure the phone is in warm condition before you flash again via Odin. Then in Odin v3.09 untick the autorestart for the process. And after that wait until the green passed come out then only plug out battery and cable then wait for 1 min plugin back and wait at least 30min and report.
The longest bootloop will be 30min to wait.
 
  • Like
Reactions: Mobita

Mobita

Senior Member
Mar 6, 2016
120
10
0
Lisboa
What I mean it's make sure the phone is in warm condition before you flash again via Odin. Then in Odin v3.09 untick the autorestart for the process. And after that wait until the green passed come out then only plug out battery and cable then wait for 1 min plugin back and wait at least 30min and report.
The longest bootloop will be 30min to wait.

So I have to put the phone in hot state??!how I do that? I made a flash with odin 3.07. but if I cant enter on dowload mode how can I flash thing with odin?
 

Yumiko87

Senior Member
Jul 18, 2016
1,939
619
0
Malaysia
is no way to get download mode or recovery functional by pc? my phone is reconized by odin when I plug it
It should give you work on download mode even you have wrong flash on it. Try press volume down+home+power for several times to make it force boot to download mode. Without that mode you can't do anything .
 

Mobita

Senior Member
Mar 6, 2016
120
10
0
Lisboa
It should give you work on download mode even you have wrong flash on it. Try press volume down+home+power for several times to make it force boot to download mode. Without that mode you can't do anything .
is another way to get download mode? I cant do it like you said
 

Munawar Mehmood

Senior Member
Feb 20, 2016
135
13
18
Rawalpindi
After flashing what ??
After flashing rom it take 20 to 25 minute to complete boot.
As your mentioned you have not recovery or download mode. try this method.
Install keis on your pc and connect your mobile. kiew will detect your phone.
http://www.samsung.com/us/support/owners/app/kies
In kies you will get option to upgrade or reinstall the firmware. reinstall your firmware through kies. it will download appropriate firmware and install it on your phone. Hope it will make your phone back to normal.
 
  • Like
Reactions: Mobita

Mobita

Senior Member
Mar 6, 2016
120
10
0
Lisboa
After flashing rom it take 20 to 25 minute to complete boot.
As your mentioned you have not recovery or download mode. try this method.
Install keis on your pc and connect your mobile. kiew will detect your phone.
http://www.samsung.com/us/support/owners/app/kies
In kies you will get option to upgrade or reinstall the firmware. reinstall your firmware through kies. it will download appropriate firmware and install it on your phone. Hope it will make your phone back to normal.
my kies do not recognize the phone :s