[Help!] Sensation XE JTAG

[Romansko]

Hello,
I have a RIFF Box and an Adapter for sensation XE.
I tried to resurrect and rewrite all. I've tried once to do with s-off and once without. The flashing itself went straight, no log errors in riff.
However, the phone is still bricked upon assembling it. When I connect the phone to the PC via usb, it is still appearing as qhsusb_dload under device manager. (with riff driver it's named Qualcomm HS-USB QDLoader 9008 (COM16))

I've also tried this guide: http://forum.xda-developers.com/showthread.php?t=2775115 and everything went straight. The problem is, after I assembled the phone, it is not being charged or responding to entering hboot.

please help.

EDIT: I've tried few things, long story short: it was a hardware failure. I took my friend's old sensation xe which was bricked also and because his phone was in bad shape, I took only the motherboard, JTAGed it, and the magic happened. Everything works.

 

[Romansko]

bump!

 

[rzr86]

bump!

try with a different battery if you have
or charge the device without battery,sim and sdcard for 4-5 hours
put them back and try to switch on the device

 

[Romansko]

try with a different battery if you have
or charge the device without battery,sim and sdcard for 4-5 hours
put them back and try to switch on the device

Thanks for advise, I'll try to charge without a battery.
I will report.

EDIT: It didn't help kind sir. I don't have another battery though.

 

[Romansko]

dead..

so I guess my device is dead.. probably some hardware fault?

 

[rzr86]

so I guess my device is dead.. probably some hardware fault?

probably yes