I have flash CM13 with safestrap on stock rom slot but the phone now is bricked...I have solution?
The phone go to recovery stock, but i can't flash any rom
The phone go to recovery stock, but i can't flash any rom
Last edited:
You can't flash anything on stock recovery, ever.I have flash CM13 with safestrap on stock rom slot but the phone now is bricked...I have solution?
The phone go to recovery stock, but i can't flash any rom
You can't flash anything on stock recovery, ever.
Only updates will install, as an update, not to unbrick.
You will have to flash stock firmware xml.zip
With RSD Lite or mfastboot, see index for Links.
Sent from my sailfish using XDA Labs
Hi, I have install RSD lite, and drivers, RSD see my phone but don't flash the firmware.
The links of the guide unfortunately aren't available, I have dowload firmware from https://firmware.center/firmware/Motorola/Droid Bionic (XT875)/Stock/ the VRZ_XT875_5.9.905.XT875.Verizon.en.US_CFC.xml but RSD say failed flashing process... Maybe I wrong..but I don't know where....
Have you some help?
Edit: in fastboot mode the telephone say cannot program. Maybe is the USB cable? i use a normal USB cable.
Screen on phoneThe drivers in windows are ok(like your video). Do you wanna know what the RDS say or the telephone?
Device cannot be flashed with battery lowDuring flash:
AP fastboot flash mode(S)
0A.61
Battery low(sometimes ok but no longer)
Cannot program (sometimes ok program)
Transfer mode
Usb connect
When I charge with power bank the red led is off.
Unfortunately I buy this phone without original cable(I use the cable of my xperia) and it comes from USA, in Italy it wasn't sold..
RDS read the phone, start program but at step 1/22 say failed.
Inviato dal mio D5503 utilizzando Tapatalk
Don't need a sim card to bootHi, battery ok, ok to program, but RDS say: Failed Flashing Process. 6/22 flash "cdt.bin" -> phone returned FAIL
I have try 2 firmwares but nothing.
Edit: I have flash a CDMA TARGA 9.8.2O-72_VZW-22_1ff, phone reboot but I don't have a sim card.
Maybe the firmware now is old? because without sim before brick it starts.
YesI don't know what i do....but I have an half problem.
Why half? Because the Slimkat on first slot of Safestrap going well, but in the stock rom partition the OS don't exist..
If I reboot in recovery I see only the green android with a red alert triangle but Slim it's ok.
What can I do? flash a custom rom on stock rom partition?
You would have to build a WearOS rom for the XT875 from Source
i figured, but was also hoping someone had dabbled in this (oddly specific) endeavor before. ill admit that i am not very good at building a ROM, last time i did for my s4, i ended up bricking it and getting a new phone .... it doesnt HAVE to be WearOS per se, but if it can perform the same functions as listed above, through a Rom that already exists, that would be fine. i want to make the Bionic "WearOS like" bc lets be real, who wouldnt want a 4 1/4" android watch!
two options for Factory resetI just pulled out my previous Droid Bionic to give to a friend and it has Android v2.3.4. It doesn't appear to be rooted but I think I may have done it when I was using it, but SU rights aren't available.
Details
Android v2.3.4
System Version 5.9.905.XT875.verizon.en.US
Baseband Version CDMA_N_04.07.02R LTEDC_U_07.1F.00
Kernel Version 2.6.35.7-g4fc328e
[email protected] #1
Build number 5.5.1_84_DBN-74
Webtop Version WT-1.3.0-108_DBN-24
I want to wipe this phone to factory
gingerbread: motofail_windows.zip by DjrBliss
Freeze Bloatwareit but not install any custom ROMS, just get it working for my friend who needs a phone. I would like to remove any bloat ware
Not sure what that means, bootloader is already locked, or baseband locked.but that's not absolutely critical, just prevent it from being locked by Verizon,
It will need to be Straight talk's Verizon network option, if it's still available.
I went through several of the forums but I'm not sure what I need to do to accomplish this?
Any suggestions or pointers would be GREATLY appreciated!
Thanks for any help!
Tom
http://forum.xda-developers.com/droid-bionic/general/how-to-installing-using-safestrap-3-75-t3184429
You must continue using safestrap, just install cm13 on stock slot, in safestrap's recovery (twrp)Hi guys
I have an Droid bionic with double boot(jelly bean rom stock and CM13) with safestrap, but i'd like cancel the rom stock and use only CM13. What's the correct way for erase jelly bean?