[Help Thread] Moto G (2015 - 3rd Gen) noob friendly
- Thread starter sd_shadow
- Start date
It is working fine But will it damage my phones battery?
No it will not.
Phones PULL current, it isn't pushed... It will draw what it needs. You could use a 2, 5, 10, or even a 100 amp charger and it wouldn't harm your device as long as the voltage and pinouts are correct.
Pinouts are the metal 'pin' or small metal rods that plug into the socket, you know, like 3-pin plug or a 2 pin one. So as lomg as you plug the charger correctly, there is no risk of damage to the device.
Broadcasted from Zeta Reticuli
Im using SPN5929A Turbo Charger with following Outputs:
Turbo output 1 : 9V - 1.6A
Turbo output 2 : 12V - 1.2A
and yet it charges my device rapidly without any damage till now (Moto G3-TE) even if i left it overnight
Your charger is a Standard Charger (Not a Fast Charger) so theres no point it can damage your device
I'm playing pubg mobile on my osprey it runs smooth in low settings
But as it heats up after some 10 mins it starts lagging Soo i think the game is in 720p so how do i decrease it to 480p (I'm on unofficial lineage os 15.1)
But as it heats up after some 10 mins it starts lagging Soo i think the game is in 720p so how do i decrease it to 480p (I'm on unofficial lineage os 15.1)
camera.google.android/can't connect to camera error?
I own a Moto G3 and I think have been facing this problem for around a week or so, why does it happen to most of the motorola devices? Any permanent fix for it?
I own a Moto G3 and I think have been facing this problem for around a week or so, why does it happen to most of the motorola devices? Any permanent fix for it?
Every time I flash an updated LineageOS nightly, my Virgin Mobile APN and IMEI disappear. And of course, I update just infrequently enough that while I have listed in a private document what the settings *should* be, I can never remember how to get either to let me a) edit them and b) have the edits stick. For this time around, it's been since April that I last updated, and I'm reverting to my full backup for now because I'm tired of trying to figure it out (again).
So yeah, why does my APN and IMEI keep disappearing when I flash?
So yeah, why does my APN and IMEI keep disappearing when I flash?
Hi a nieghbour of brought a Moto g 2015, 2-16 version, its getting bootlooped when i connect a phone charger to it.
as we dont have official charger, how to stop the bootlooping ?
as we dont have official charger, how to stop the bootlooping ?
Shouldn't need a official charger, but not all chargers are equal.
Try booting to bootloader
Power button and volume down.
Select power off
Reconnect charger
Black screen after Lineage OS 14.1 installation on Motorola Moto G3 (2015; Osprey)
Hi,
recently I've installed Lineage OS 14.1 nigthly build with Gapps Nano via TWRP 3.2.3.0.
Everything went well; without any problems I've flashed the recovery, pushed images to device and install system with Google apps through TWRP.
Problems started after installation. Because I haven't much time for configuration of new system, I've shutted down my device directly from TWRP.
Later, I tried to turn it on, but screen remained black (without any backlight) and device started to vibrate once for every 45 seconds. Nothing more happened.
My device is soft bricked now. I can't boot it into bootloader or recovery (because screen remains black and phone vibrates in intervals).
I've tried to manipulate the device with fastboot and ADB after plugging it in with USB to my computer - fastboot is "seeing" phone ("fastboot devices" command prints its ID), but I don't know what else I can do with fastboot. ADB does'nt "see" my phone ("adb devices" command returns empty list).
Does anyone know how can I get my phone back to usable state?
Hi,
recently I've installed Lineage OS 14.1 nigthly build with Gapps Nano via TWRP 3.2.3.0.
Everything went well; without any problems I've flashed the recovery, pushed images to device and install system with Google apps through TWRP.
Problems started after installation. Because I haven't much time for configuration of new system, I've shutted down my device directly from TWRP.
Later, I tried to turn it on, but screen remained black (without any backlight) and device started to vibrate once for every 45 seconds. Nothing more happened.
My device is soft bricked now. I can't boot it into bootloader or recovery (because screen remains black and phone vibrates in intervals).
I've tried to manipulate the device with fastboot and ADB after plugging it in with USB to my computer - fastboot is "seeing" phone ("fastboot devices" command prints its ID), but I don't know what else I can do with fastboot. ADB does'nt "see" my phone ("adb devices" command returns empty list).
Does anyone know how can I get my phone back to usable state?
last post was in 2018 but i lost my GS8 so i'm stuck with this for a bit. I have a question about storage. what format of SD card does the phone support? i'm using RR Rom and i can't access or use the SD card. thanks.
The hardware should be compatible with many formatting, but RR will only be compatible with certain but most formatting.
I suspect that if you reformat the card in another device/pc, it would work fine again.
Sent from my PH-1 using XDA Labs
hello good night, I have a g3 motorcycle (XT1544) I am having trouble unblocking the bootloader but even with UNIQUE KEY I could not, because my boot screen shows the status engeneering and when I perform the precedence in cmd access failure by remote access. Can someone help me ?
An "engineering" bootloader cannot be corrected by the user... Google will show you tons of results, but basically only Motorola can fix it. It does not have a retail firmware, but it's an engineering firmware for testing and diagnostics. No one can reflash it except Moto.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone