HELP! Upgraded now mogul wont boot!

[TripFlex]

So was following directions to upgrade to nuerom, and i accidently installed the old bootloader 1.2 (olipro), and so i then upgraded the ROM afterwards to the nuerom.

Well now my phone turns on and goes to the HTC screen but just sits there and does nothing.

Hard and soft reset don't change anything...what can i do?!

 

[coffey_joshua]

run the re-locker and then the 2.4 bootloader
you can find them both here

http://forum.ppcgeeks.com/showthread.php?t=9093

 

[TripFlex]

run the re-locker and then the 2.4 bootloader
you can find them both here

http://forum.ppcgeeks.com/showthread.php?t=9093

But it wont even connect via activesync, it just sits at the first screen you see whenever you boot your phone up...

 

[rbadh91]

But it wont even connect via activesync, it just sits at the first screen you see whenever you boot your phone up...

put it in bootloader mode first...hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus, and then try it...plus u dont have to be connected w/ activesync

 

[JonnyBoy313]

no active sync

If you cant connect to active sync, open active sync on home pc go to conections and uncheck usb connection that helped me last night

 

[atomiix]

put it in bootloader mode first...hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus, and then try it...plus u dont have to be connected w/ activesync

if you follow his way it works but also

*please be cautious i'm new but i know my stuff*

your going to have to format the micoSD card to FAT32 with a MicroSD card reader or some type of MicroSD to SD converter(http://en.wikipedia.org/wiki/MicroSD)

(goto my computer/ right click the drive it was assigned to and click format... then under "file system" click on FAT32 then click format)

Download the rom update from HTC

Open the exe in WinRAR (rarlabs.com)

Find RUU_signed.nbh (it will be the biggest file)

extract it onto your desktop and rename it to TITAIMG.nbh

Move the file over to the formatted card and then insert it into phone.

Hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus

and done your phone should reconfigure back to how it would be "Virgin"

AtOMiiX
-CiiO kUrWa

 

[JonnyBoy313]

same issue

I followed the format sd card directions, put in phone went to bootloader screen . BUT IT HAS BEEN DOWNLOADING FOR LIKE 15 MIN,

I guess my real question is did it freeze or should i let it keep going

 

[JonnyBoy313]

Trying to flash from sd card Still in loading mode help

It is in loading mode for a half in hour is that normal

 

[rbadh91]

i have never used the sd card...bit i believe its gotta write about 50+mb of stuff to ur fone...it takes about 10 mins over usb2.0 (it doesnt really go to that speed) so i guess it can take that long

please post how long it took if it goes successful for others to know...thanks

 

[H'Roth-Gar]

I'm having the same problem here.

I ran the relocker, but it still says SPL-1.20.Olipro... I don't know why it didn't relock... what should I do, the SD option didn't seem to work either...

 

[TripFlex]

I'm having the same problem here.

I ran the relocker, but it still says SPL-1.20.Olipro... I don't know why it didn't relock... what should I do, the SD option didn't seem to work either...

i got it fixed...basically what you have to do is go into the bootloader like everyone said and then i reflashed it with the original rom...after that i learned that you have to run the radio in order to boot

 

[atomiix]

it take 5-10 min its really fast... try it again or grab a different ROM

 

[JonnyBoy313]

SD card Flashing wont work.

I Really Am stuck. Flashing did not seem to work left it in the downloading for over an hour, then gave up. (I was trying to update to DCD Titan 2.1.0, From Sprint 2.17.651.0, Radio Version 1.47.01 ORIGINALY gave me problem Stuck in htc black screen)
I wont connect activesync, or usb peroid, so I formatted SDcard to FAT32, put the Sprint 2.17.651.0.nbh file into the card renamed it TITAIMG.nbh, and tried to flash. (Loading screen for over an hour, then gave up)
Some else said somthing about flashin 3.16 because of radio issues.
(from going 2.17, to DCD 2.1.0) but I cant find 3.16.nbh. if anyone could Link me to it that would be cool.
ANTHING THAT COULD HELP ME UNBRICK MY MOGUL,PLEASE SEND

 

[bakntyme]

I Really Am stuck. Flashing did not seem to work left it in the downloading for over an hour, then gave up. (I was trying to update to DCD Titan 2.1.0, From Sprint 2.17.651.0, Radio Version 1.47.01 ORIGINALY gave me problem Stuck in htc black screen)
I wont connect activesync, or usb peroid, so I formatted SDcard to FAT32, put the Sprint 2.17.651.0.nbh file into the card renamed it TITAIMG.nbh, and tried to flash. (Loading screen for over an hour, then gave up)
Some else said somthing about flashin 3.16 because of radio issues.
(from going 2.17, to DCD 2.1.0) but I cant find 3.16.nbh. if anyone could Link me to it that would be cool.
ANTHING THAT COULD HELP ME UNBRICK MY MOGUL,PLEASE SEND

When you go into bootloader mode (power/camera/reset), what bootloader version is displayed on the screen? When you upgraded to the DCD ROM, did you also flash the new radio?

 

[willxcore]

Can I add my dilemma to this thread? My Mogul also won't boot up. It gets to the yellow Sprint logo screen and then just shuts right back off.

I also, hard reset and that doesn't help. I can get to the bootloader screen but trying the Relocker means it wants my phone connected via Activesync (it calls for that in the DOS window that pops up), Activesync doesn't recognize the connection since the phone is in BL mode. Nothing I've tried so far has worked and some people on howardforums have tried to help and said I needed to install the radio only first and then go from there but I have had some trouble finding the original Radio as a download by itself.

Any takers on how I might be able to get this bad boy up and running again?

PS. I've also tried to install the original ROM found on the official HTC website and that didn't work either.

I appreicate if anyone can help both of us (the guy who posted the thread, too) out.

 

[s10onn2o]

try extracting the relocker and then flash it.

 

[JonnyBoy313]

Thanks guys this thread really helped me

 

[willxcore]

try extracting the relocker and then flash it.

If this is directed towards me, I extracted the relocker but I don't know what you mean by "flash it"

I thought flashing the ROM meant reinstalling a previous version or something. I've already tried running the relocker but like I said it requires an activesync connection but that doesn't work since I can only access R/G/B mode.

All the files inside the relocker are gibberish to me. Don't know what any of those things do separately.

 

[H'Roth-Gar]

i got it fixed...basically what you have to do is go into the bootloader like everyone said and then i reflashed it with the original rom...after that i learned that you have to run the radio in order to boot

Thanks, after pulling out my hair for a couple of hours, I finally was able to get it to work. The stock rom wouldn't flash at first for me, but I was able to get it to work on the third try... everything seems fine now...

 

[bakntyme]

Can I add my dilemma to this thread? My Mogul also won't boot up. It gets to the yellow Sprint logo screen and then just shuts right back off.

I also, hard reset and that doesn't help. I can get to the bootloader screen but trying the Relocker means it wants my phone connected via Activesync (it calls for that in the DOS window that pops up), Activesync doesn't recognize the connection since the phone is in BL mode. Nothing I've tried so far has worked and some people on howardforums have tried to help and said I needed to install the radio only first and then go from there but I have had some trouble finding the original Radio as a download by itself.

Any takers on how I might be able to get this bad boy up and running again?

PS. I've also tried to install the original ROM found on the official HTC website and that didn't work either.

I appreicate if anyone can help both of us (the guy who posted the thread, too) out.

If you are in bootloader, try flashing the "unofficial leaked" ROM. NOT one of the custom ROMs based on it, but the complete leaked package; it includes compatible bootloader, radio, and ROM, and should get you back up and running. You should then be able to run the old relocker and the old official radio and ROM package if that is what you are trying to do.

http://forum.xda-developers.com/showthread.php?t=362403