Question Help with Unbricking OnePlus 10 Pro (NE2213)
- Thread starter Khalid Ghouri
- Start date
So I was checking out BING AI and found this. Does anyone know if its authentic or does it work on our hard brick device running oxygen/color os 13?
Last edited:
Iirc you held vol up and down to get to EDL mode or you needed to pop off the battery and short it.
Holding vol up? Isn't that just for fastboot? If you still have fastboot then you can still recover, if you can't then you're stuck in 9008 mode (crash dump) then you'd need MSM or OnePlus RMA, if this tool only uses fastboot then it wouldn't help with 9008 / crash dump mode where MSM would normally be used, I could be wrong but AFAIK that would be the case.
I think it meant edl mode by using volume up.
Heres a reply i got when i asked it if it meant edl mode from volume up:
"Yes, that's correct. You need to enter EDL mode on your device by holding down the volume up button while connecting it to your computer using a USB cable. This will allow QFIL to communicate with your device and flash the firmware.
I hope this helps! "
Oh right, tbh the only exposure I had to edl mode was on the 8 pro, in that I used to hold both up and down vol keys... Not and single one, it simply wouldn't work, I always forget what key is used to jump into the bootloader / fast boot so seeing as it was singular and I was used to both I assumed it was fast boot not edl.
So does this work then? QFIL? I'm surprised I've not heard of it before...
Edit: im on their site now, looks superb so far.
Edit2: yea that looks to be edl and looks to do what is required.
So has anyone tried this? Would an MSM image for the 10 pro work with this?
Here's the file for the 10 pro 2213 which is not QFIL bit QPST, apparently there's a difference between the two regarding the boot.hex file which comes with the 10 pro...
Would love to see this in action.
OnePlus 10 Pro NE2213 Stock Firmware ROM (Flash File)
Download the official OnePlus 10 Pro NE2213 Stock Firmware ROM (Flash File) for your OnePlus Mobile. We also provide all other OnePlus Stock Firmware for free.
Last edited:
I am also asking does anyone know if it works or not?Oh right, tbh the only exposure I had to edl mode was on the 8 pro, in that I used to hold both up and down vol keys... Not and single one, it simply wouldn't work, I always forget what key is used to jump into the bootloader / fast boot so seeing as it was singular and I was used to both I assumed it was fast boot not edl.
So does this work then? QFIL? I'm surprised I've not heard of it before...
Edit: im on their site now, looks superb so far.
Edit2: yea that looks to be edl and looks to do what is required.
So has anyone tried this? Would an MSM image for the 10 pro work with this?
Here's the file for the 10 pro 2213 which is not QFIL bit QPST, apparently there's a difference between the two regarding the boot.hex file which comes with the 10 pro...
Would love to see this in action.
OnePlus 10 Pro NE2213 Stock Firmware ROM (Flash File)
Download the official OnePlus 10 Pro NE2213 Stock Firmware ROM (Flash File) for your OnePlus Mobile. We also provide all other OnePlus Stock Firmware for free.firmwarefile.com
{Mod edit: Quoted spam post has been deleted. Oswald Boelcke, Senior Moderator}
I don't need help, also super one click looks like it lets you communicate with your phone using adb or old root like SuperSU? Last updated in 2014?
How will that help here?
I don't need help, also super one click looks like it lets you communicate with your phone using adb or old root like SuperSU? Last updated in 2014?
How will that help here?
Last edited by a moderator:
That's definitely spam. He created the account just for advertising that.
Yea I figured it is, but what's the point lol, it's already on XDA..I didn't use his link I just googled it, I've actually heard of it before many years back.
Tbh it was useless to me then
Just use oxygen updater.. choose advanced then full zip.
Oxygen Updater - Apps on Google Play
Skip staged rollout queues and update your OnePlus device ASAP!
will this fix the crash dump error? if not is there a solution I've been reading for a while now it doesn't seem soJust use oxygen updater.. choose advanced then full zip.
Oxygen Updater - Apps on Google Play
Skip staged rollout queues and update your OnePlus device ASAP!play.google.com
im trying to find the correct file to flash through QFIL
Sorry you're not being clear, you asked for a firmware file.. This is what you use to obtain them for your region..
Are you referring to the MSM tool? Then the answer is a flat no and always will be for the OnePlus 10 Pro.
If you're in crash dump mode then oxygen updater will not help you, you'd need to contact OnePlus and RMA or contact a dodgy guy and pay.
PS: I don't know the dodgy guys but there are some here who will
- Apr 13, 2016
- 22,491
- 69
- 50,411
- 67
This is correct but we don't share their names or links.
Regards
Oswald Boelcke
Senior Moderator
fixed it
flashed payload through fastboot phone booted right up. spent the last 6 hours trying to do this.
no more crashdump error
used fastboot enhanced v.1.3.0 to achieve the payload flash
Last edited by a moderator:
I'm confused was crash dump the only screen you could get on your phone?
Personally haven't been in that situation but have read that only MSM could recover it, FE requires you to be in fastboot or fastbootd mode..
How did you manage that?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
fixed it
flashed payload through fastboot phone booted right up. spent the last 6 hours trying to do this.
no more crashdump error
used fastboot enhanced v.1.3.0 to achieve the payload flash -
6So this is the suggestion that I have for anyone who has the 10 pro. Don't take the chance and try to do anything with rooting or installing a custom rom. It seems I have fallen into the same trap as the OP. While attempting to root my phone the same thing has happened and my phone is bricked. I have attempted everything to fix it but it doesn't work. Since there is no msm tool for the 10 pro there is no solution. Luckily I have oneplus care insurance and now I'm waiting to ship my phone out tomorrow morning. It is such a waste of time and money though. I had to go out and spend an additional $250 so that I wod have a temporary phone to use. Save yourselves the trouble and if you want to have a phone for rooting etc... Get one that at least has an msm tool to fix it when something goes wrong. I'm very disappointed that all these years of using oneplus phones, there was always an msm tool to start from scratch. Never once did I have a bricked phone. Now I have the latest and greatest phone and I cannot do anything to fix it.4Greetings everyone,
Dropping by here to clean this thread and remind everyone that XDA Developers is not a website that promotes illegal activities such as using keyloggers to grab credentials of support teams. Continous violation of rules will lead to infractions followed by a ban.
Take some time to read the XDA Forum Rules, especially:
9. Don't get us into trouble.
Don't post copyrighted materials or do other things which will obviously lead to legal trouble. If you wouldn't do it on your own homepage, you probably shouldn't do it here either. This does not mean that we agree with everything that the software piracy lobby try to impose on us. It simply means that you cannot break any laws here, since we'll end up dealing with the legal hassle caused by you. Please use common sense: respect the forum, its users and those that write great code.
Regards,
theimpulson3Well I want to help so I copied and paste Theo from the oneplus 10 pro group on telegram what i posted here i hope this tutorial might help you
I didn't make this tutorial so if this works join the group and thank @docnok63 i don't know if this is also his XDA name
if so then you can thank him on XDA
With an unlocked bootloader, Fastboot Enhance allows you to flash stock OOS without relocking the bootloader like MSM. It can also be used to downgrade your OS without losing data. To use it, download it from Github and:
1) Put the phone in fastboot mode and connect to PC
2) Launch the Fastboot Enhance app and double-click your connected device
3) Click the “Reboot to Fastbootd” button
4) Once in fastbootd, click the Flash Payload.bin button. If you get a warning about cow files, ignore and hit the Yes button
5) Select the FULL OTA.zip of your choice (incremental patches not allowed.)
6) The app will extract the payload.bin from the full zip and begin flashing automatically. Do NOT touch your device or close the app during this time or you risk bricking your device
7) Once done flashing, you will get a “Operation completed” dialogue box. Hit Okay and then hit the “Reboot to System” button. Profit.3
Just tried. I get those messages in both tabs. Qualcomm and Other's with oneplus chossen.
