have a xt1032, was with the gpe 4.4.4 and had the bootloader unlocked, I got the ota to 5.0.1, at the end of the update died totally, not to nothing, with a tutorial I can revive it in fastboot mode, but from there No passing will not let me flash any firware, they are my last hope.
Sorry for my bad english
This is what you put in fastboot mode
AP FASTBOOT MODE (S)
41.1A (*) (sha-80481ae, 2015-04-10 14:30:28)
CPU: MSM8226 CS
eMMC 16GB TOSHIBA RV=06 PV=01 TY=17
DRAM: 1024MB HYNIX S4 SDRAM DIE=4GB
BATTERY OK
DEVICE IS LOCKED. STATUS CODE: 0
CONNECT USB DATA CABLE
BOOT MODE SELECTION MENU
VOL YP SELECTS, VOL DOWN SCROLLS
NORMAL POWERUP
RECOVERY FACTORY
BARCODES
BP TOOLS
QCOM
FASTBOOT REASON : VOLUME DOWN KEY PRESSED
FAILED TO VALIDATE BOOT IMAGE
BOOT UP FAILED
Sorry for my bad english
This is what you put in fastboot mode
AP FASTBOOT MODE (S)
41.1A (*) (sha-80481ae, 2015-04-10 14:30:28)
CPU: MSM8226 CS
eMMC 16GB TOSHIBA RV=06 PV=01 TY=17
DRAM: 1024MB HYNIX S4 SDRAM DIE=4GB
BATTERY OK
DEVICE IS LOCKED. STATUS CODE: 0
CONNECT USB DATA CABLE
BOOT MODE SELECTION MENU
VOL YP SELECTS, VOL DOWN SCROLLS
NORMAL POWERUP
RECOVERY FACTORY
BARCODES
BP TOOLS
QCOM
FASTBOOT REASON : VOLUME DOWN KEY PRESSED
FAILED TO VALIDATE BOOT IMAGE
BOOT UP FAILED
