• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Question HELP!!!!

Search This thread

garvitkhatod

Member
Jan 10, 2015
12
3
I relocked bootloader and now phone won't boot past bootloader. It's only giving options to "start/ recovery/ restart bootloader/ power off" Phone is getting recognised in fastboot, but since I relocked bootloader I can't flash anything at all. Kindly help me what I can do for this mess. I tried using bootloader lock commands and it's saying bootloader already locked. I'm feeling helpless. Kindly help 😣😣
 
  • Like
Reactions: Handeman707

Andrologic

Senior Member
Apr 29, 2016
145
1
51
Huawei Mate 20 X
ASUS ROG Phone 3
Not entering recovery or anything! It's just stuck there. When I turn off and try to restart it again stays the same ie. On bootloader.

I mean can you scroll with the volume up/down buttons to you see Recovery and push the power button to enter recovery like normal? If you can, try doing a factory reset from there. If that's not possible, try doing a RAW firmware install - but check if you can just do a normal reset first..
 

garvitkhatod

Member
Jan 10, 2015
12
3
I mean can you scroll with the volume up/down buttons to you see Recovery and push the power button to enter recovery like normal? If you can, try doing a factory reset from there. If that's not possible, try doing a RAW firmware install - but check if you can just do a normal reset first..
Even if I prees button on recovery it against reboots to same place. It's like an example infinite bootloop.
 
This probably shouldn't be a how to guide and the title should be something more descriptive than "help"

A how to guide typically includes instructions, like this one:

The good news is that you can still flash a raw firmware with the bootloader locked.


In the future, take the time to look at the guides here before jumping into anything that involves the system or bootloader unless you are absolutely sure you know what you're doing.

 
  • Like
Reactions: ZModder

3rehaan

Member
Nov 16, 2019
40
2
It Says :
CONVERSION ONLY:
Make sure you unlocked the bootloader
Install Bootloader Unlock app
Launch app and follow instructions

But I Cant Unlock It My Bootloader Status Is Locked !
 

3rehaan

Member
Nov 16, 2019
40
2

Attachments

  • IMG_20210926_120515.jpg
    IMG_20210926_120515.jpg
    1 MB · Views: 25

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    You should definitely try and flash a CN RAW to try and get the device back first then, your device seems to be rejecting WW roms. Sorry I don't have a CN RAW file to share with you, try to download one from the links on this forum, I think I've seen a link to one. Use the same steps to initiate the flashing.

    1
    I relocked bootloader and now phone won't boot past bootloader. It's only giving options to "start/ recovery/ restart bootloader/ power off" Phone is getting recognised in fastboot, but since I relocked bootloader I can't flash anything at all. Kindly help me what I can do for this mess. I tried using bootloader lock commands and it's saying bootloader already locked. I'm feeling helpless. Kindly help 😣😣
    1
    No I've flashed stock boot.img before and flashed afterwards. Can I still flash anything with bootloader locked?
    Yes I'm quite sure you should be able to flash a clean firmware with a RAW rom. Use the FTM flashall script.
    1
    This probably shouldn't be a how to guide and the title should be something more descriptive than "help"

    A how to guide typically includes instructions, like this one:

    The good news is that you can still flash a raw firmware with the bootloader locked.


    In the future, take the time to look at the guides here before jumping into anything that involves the system or bootloader unless you are absolutely sure you know what you're doing.

    1
    I Am Really Sorry My English Is Not Good
    My Model Is Not S ..!
    I Cleared The Echo Line From The flash all_FTM script now This Says

    C:\WW_ZS673KS_18.0830.2102.88_M2.13.24.14.3-ASUS_1.1.80_Phone-user.raw>IF NOT 1 == 0 (
    ECHO "FAILED, fastboot.exe flash all WW_ZS673KS_18.0830.2102.88_M2.13.24.14.3-ASUS_1.1.80_Phone-user.raw failure, EXIT!"
    IF EXIST .system_tmp.img DEL .system_tmp.img
    EXIT 1
    )
    "FAILED, fastboot.exe flash all WW_ZS673KS_18.0830.2102.88_M2.13.24.14.3-ASUS_1.1.80_Phone-user.raw failure, EXIT!"


    No need to be sorry for your English. Now we know it's not an S model.

    1) In your RAW folder there are a couple of '.log' files generated. Can you upload those here?

    2) Also, can you do a "fastboot getvar all" and post what you get on this device?