Question help!!

Search This thread

ryzen23

Member
Sep 12, 2018
22
1
need help guys my phone is stock on updating then reboot updating i think it's bootloop. i cant go to recovery and my pc can't detect my phone on fastboot or even on the technician i know event in EDL mode test point the led only flashing but nothing appear in the device manager i try 5 pc/laptop same problem
 

ryzen23

Member
Sep 12, 2018
22
1
Hi , have you try Test point?
do you have dissabled signature drivers to install all drivers? like qualcom drivers and fastboot and adb from Mi flash tool...
I already try the test point you can read it in my post and i already install all fastboot drivers and Qualcomm driver and i disable the signature driver. my phone is not detected i try buy new cable 3x still not detected is this a hardware issue?
 

Enriquecalong

Member
Feb 6, 2019
40
2
I already try the test point you can read it in my post and i already install all fastboot drivers and Qualcomm driver and i disable the signature driver. my phone is not detected i try buy new cable 3x still not detected is this a hardware issue?
May be your port... you cant acces to recovery right? its on MIUI screen or Poco screen?
 

Enriquecalong

Member
Feb 6, 2019
40
2
QFILDownload

Qfil Driver 64xDownload

Standart Qualcom driver Download
i think that you are watching in Device manager if your poco its readed, will be like Q9008 or something like that , or if your drivers are bad you will see an 'Unknown usb decription failed"

those drivers are for test point...

i think that you are not doing well the test point.


196ddeceede62c6158d5c99c26f4210d.jpg
 

ryzen23

Member
Sep 12, 2018
22
1
i think that you are watching in Device manager if your poco its readed, will be like Q9008 or something like that , or if your drivers are bad you will see an 'Unknown usb decription failed"

those drivers are for test point...

i think that you are not doing well the test point.


View attachment 5616137
i know when device is detected in device manager sir and edl mode when the LED is blinking the phone is in edl mode
 

Enriquecalong

Member
Feb 6, 2019
40
2
i know when device is detected in device manager sir and edl mode when the LED is blinking the phone is in edl mode
Oh ok , try with other port , if that didnt work you may need to use a JTAG tool :( , or can be that the pmic is middle dead cause of that your port is of , oor any lines in that has consume or is in short.. :( if you hav an tester , try to know if you recive the 5v from the USB C port to The respective pin USB DIAGRAM