Homtom HT7 PRO./ 2GB 16GB Mt6735/ Info /TWRP

Status
Not open for further replies.
Search This thread

lipippo

Senior Member
Apr 12, 2016
194
30
New Ports Available on 4PDA (MIUI, TOUCHWIZZ)

But google translate does a particularly bad job with the comments in that site :(
Do you know if any of the port uses a custom kernel or they just took the kernel from the stock rom?
I'm asking because I think that the GPS is grossly inaccurate because of a bad driver/calibration, not because of the hardware (it has good reception, at least that's it what it reports), so maybe a different kernel could make the GPS usable.
 

Hezoyan

Senior Member
Mar 27, 2015
82
5
Porto
I can only use the rev1 because the rev2 make always rebooting, what is the diference between rev1 and rev2?
For me rev1 (7.2.16) is stable, fast and all work
 

xavierf

Senior Member
Dec 22, 2008
314
141
I can only use the rev1 because the rev2 make always rebooting, what is the diference between rev1 and rev2?
For me rev1 (7.2.16) is stable, fast and all work

V1 is for the first version (firmware 1.1.3 to 1.2.3)
V2 is for the last version or XP (firmware 1.0.1 to 1.0.4)
 

mozden

New member
Oct 24, 2016
3
0
Camera performance

Hello there,
I'm using 1.0.4. Sometimes I have to take pictures of documents or newspaper pages. My old phone general mobile discovery (gionee elife e3) was not bad on this issue. Unfortunately the document photos I took with the ht7 pro are very bad. I reported it with a homtom email but I do not think they will work for a solution. Are there any friends who have experienced this problem and have a solution?
Thanks in advance

Türkçe bilenler için:
Merhaba,
1.0.4 rom kurulu telefonumdan Bazen belgelerin ya da gazete kitap sayfalarının fotoğrafını çekmem gerekiyor. Eski telefonum general mobile discovery (gionee elife e3) bu konuda fena değildi. Ne yazık ki ht7 pro ile çektiğim belge fotoğrafları çok kötü. homtoma eposta ile bildirdim ama çözüm için çalışacaklarını sanmıyorum. Bu sorunu yaşamış olan, çözümü olan arkadaşlar var mı?
Şimdiden teşekkürler.
 
Last edited:

GreenGlob

New member
Mar 2, 2017
1
0
Hi guys.
I got myself lost among the different pages trying to find working links to all the files needed to flash TWRP on this phone.
Any chance for an updated guide for doing so? I always seem to encounter the "BROM" error.
 

Jascha2016

Member
Feb 3, 2016
25
0
Good morning

I could not fix it but thanks equally to all, I returned to the seller of the smartphone and me replaced.
 

Kilua90

Member
Nov 18, 2016
41
18
Xiaomi Poco X3 Pro
There is a special version of TWRP for your XP phone.



I have already unlocked the bootloader setting and i flashed the recovery at the needrom for mui but it keep booting the recovery stock. I also tried to download the twrp for v1.0.4 at the 4pda but it seem it has been removed. Can you give me the link for the special version of twrp for my phone. Thanks for the reply :D
 

xavierf

Senior Member
Dec 22, 2008
314
141
I have already unlocked the bootloader setting and i flashed the recovery at the needrom for mui but it keep booting the recovery stock. I also tried to download the twrp for v1.0.4 at the 4pda but it seem it has been removed. Can you give me the link for the special version of twrp for my phone. Thanks for the reply :D

The problem is TWRP or MIUI.
You can reboot in recovery mode ?

Check : TWRP 3.0.3
 
Last edited:
  • Like
Reactions: Kilua90

Kilua90

Member
Nov 18, 2016
41
18
Xiaomi Poco X3 Pro
The problem is TWRP or MIUI.
You can reboot in recovery mode ?

Check : TWRP 3.0.3

I mean the stock recovery.
The link that you give for my version which is twrp for GF20_HT7Pro_XP_VC_N40_V1.0.4 cannot be downloaded because it might have been deleted.or removed. So where can I find the twrp for my version phone? Perhaps you can upload somewhere and give the link? Thank you.
 
Last edited:

xavierf

Senior Member
Dec 22, 2008
314
141
I mean the stock recovery.
The link that you give for my version which is twrp for GF20_HT7Pro_XP_VC_N40_V1.0.4 cannot be downloaded because it might have been deleted.or removed. So where can I find the twrp for my version phone? Perhaps you can upload somewhere and give the link? Thank you.

Sorry but I don't have a XP version.
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    HOMTOM HT7 PRO
    MTK6735 64Bit GPU:Mali-720
    RAM 2GB
    ROM 16GB
    Android 5.1
    Camera
    13 MP Sony IMX219
    5.0 MP GC2355
    The battery capacity of 3000 mAh;
    Bluetooth: BT 4.0
    WiFi: 802.11 b / g / n
    GPS: GPS, A-GPS
    SIM: Dual SIM, Dual standby (size - micro)
    Frequency: 2 g: GSM 850/900/1800/1900 MHz
    3G: WCDMA 850/1900/2100 MHz
    4 g: FDD LTE 800/1800/2100/2600 MHz
    Dimensions: 155.4 x 77.8 x 7.9 mm.

    HTB1JCf1JFXXXXXoaXXXq6xXFXXXu.jpg


    Install standard MTK drivers.
    https://forum.xda-developers.com/attachment.php?attachmentid=3945744&d=1479908355

    Use the SPFlash Tool 1552, 1548
    https://androidmtk.com/flash-stock-r...one-flash-tool

    flash recovery.img wit SPflash using scatter file in attachments

    boot in recovery choose to modify (no read only) reboot in recovery from within TWRP with reboot button
    to install supersu follow this
    1.download SuperSU265.zip and place file in sdcard
    https://drive.google.com/open?id=0B8...WtRamhkdVZQbk0
    2.boot to twrp
    3.press Mount ,and select sdcard ,then back to main page
    4.select Install ,move to sdcard ,select SuperSU265.zip
    5. then swipe to confirm

    TWRP 3.0 by Jemmini
    http://4pda.ru/forum/index.php?showtopic=736890&st=0#entry48494859
    3
    I am one of the people trying to solve the problems with battery life in both HT7 & HT7 Pro so I know the problems.
    No reason to attack me. Just do not buy it if you know how bad a firm is.
    Using Notification Light Widget and Disable Service solved the problem at the cost of not having lights notifications. I had to root both Ht7 and HT7 Pro to remove malware.
    But at the end Homtom phones are value for money as far as spec and design is concerned.
    And are performing quite well after adjusting.

    I do not like the idea that me and some other members of the forum are free support for Homtom and I would expect Homtom to improve their firmware themselves.
    since it is a 60-90 USD phone people are buying it anyway but with some effort it can be better
    3
    I found a fix for wakelocks

    I've been able to be away from wakelocks on my device. It's a fix until homtom release a real fix to be able to use notification led without lose all our battery.

    1.- Use stock rom 1.23
    2.- Change the recovery via SCATTER process and install TWRP ver 3.0 or higher
    3.- Once into TWRP root your phone with supersu. Reboot and update binaries if you used an old update.zip to install root.
    4.- Use titanium (or similar) to backup, freeze and DELETE OTA Updates. You can freeze it but it will be unfreezed after first reboot. You can backup and delete with no problem, then restore when you want to use again. Note that yes, it is a system app
    5.- In settings, disable all led notifications.

    At this point, like other people, you will only have wakelocks when low battery or charging. To resolve this wakelock the only fix its to reset the device. Then the fix I found :)

    6.- Install xposed v85 for arm64 via TWRP (xposed-v85-sdk22-arm64.zip). Also you have to install the apk to be able to use Xposed once you phone has booted. XposedInstaller_3.0_alpha4.apk . Both downloads in Xposed thread: http://forum.xda-developers.com/showthread.php?t=3034811
    7.- Wait for the first reboot, it takes some time.
    8.- Enter in xposed and download GravityBox [LP] v5.4.3 or higher
    9.- Enable the module in xposed and reboot

    Now, we are just only one step to fully disable al leds notifications :)

    In gravity box>Power Tweaks:
    - Low battery Warning (off)
    - Disable LED Flashing (ticked)
    - Battery Charging LED (disabled)

    Reboot and... TADAAAAA!!!!! :)

    Now, you can also take advantages of other gravity box enhancements and xposed modules.

    I hope this could be useful for other people. My wakelocks are 0% for led, OTA updates or other unknown sources