Honda Connect 6VC9 won't boot after sw update

Search This thread

Rocco

Member
Mar 1, 2005
8
0
Hi All!

I have a Honda Connect audio system (39100-TB9-G61-M1)
After a navigation issue I updated the firmware on the device. The device updated correctly and rebooted. But, never started again.
I can flash the two file from usb after the device starting (ADA_usbdl_V0C.091.01_TV0X_04.zip and ADA_usbdl_V0E094001123_sec_14ada.zip)
But I can't flashing a file (AUD31CF.bin). The navi wrote: "There was a problem during the update. Please switch off the vehicle then restart to retry."
I restarted many times but nothings happened. the navi wont flash the file (AUD31CF.bin) and won't start.

What can I do whit this navi system?
Can somebody help me to recovering this system?
 
Last edited:

Rocco

Member
Mar 1, 2005
8
0
Hi All!

I have a Honda Connect audio system (39100-TB9-G61-M1)
After a navigation issue I updated the firmware on the device. The device updated correctly and rebooted. But, never started again.
I can flash the two file from usb after the device starting (ADA_usbdl_V0C.091.01_TV0X_04.zip and ADA_usbdl_V0E094001123_sec_14ada.zip)
But I can't flashing a file (AUD31CF.bin). The navi wrote: "There was a problem during the update. Please switch off the vehicle then restart to retry."
I restarted many times but nothings happened. the navi wont flash the file (AUD31CF.bin) and won't start.

What can I do whit this navi system?
Can somebody help me to recovering this system?


!!!Update more information!!!!


I have a Fujistu FT0056A device. This device its a sat-nav in a Honda Civic.
The device is frozen. After a usb firmware flashing won't startet. Its in boot-loop. I tryed many solutions, but not working.

http://oi68.tinypic.com/w9jjvt.jpg

First time I tried to flashing from usb stick. I have thre original Honda flash file to tis device:
- For SH USB1 - AUD31CF.bin - I can't extract the bin file. Maybe this contain the boot and recovery images. - I can't flash with via usb stick. Its a error message... Maybe

this bin file contain the boot and the recovery images.
- For tegra EC/NC USB2 - ADA_usbdl_VL0.FFF.04_EXT_HFT_param02.zip - Flash zip file loaded up correctly to the device via usb stick.
- For Tegra USB3 - ADA_usbdl_V10096001123_sec_14ada.zip - Flash zip file loaded up correctly to the device via usb stick. This zip file contain a

"ADA_usbdl_10.096.00.1123.enc" file. Can't decrypt or extract. Its a password protected file. I not know whats the password...

I tried to downgrade, with older and upgrade with newer wersions, but not working....

Now I tried flashing via OTG USB on the USB-B system port
I can't find any driver to the device. I found many driver (apx ; nvidia shield ; toradex_usbpcdriver_32_64 ; universal naked drivers ; etc.) but the ****usb.inf file not

contains any record of this device, what they call it:
USB_Install, USB\VID_0955&PID_7102
USB_Install, USB\VID_0955&PID_7102&REV_0232

After the inf editing and With forced install, i can connecting the driver to the device with many "name":
NVIDIA USB Boot-recovery driver for Mobile devices"
NVIDIA Android Fastboot Device
NVIDIA Android Composite Device
Android Debug Bridge Interface
etc....

I found thre diferent driver dll version too:
WdfCoInstaller01009.dll
winusbcoinstaller2.dll
WUDFUpdate_01009.dll
-------------------------
WdfCoInstaller01009.dll
winusbcoinstaller2.dll
WUDFUpdate_01007.dll
------------------------
and
WUDFUpdate_01009.dll in another file size....

the device not aswered to the fastboot.
Fastboot devices
Cant find any device

Only the xiaomflash.exe can read a a devise serial:
015e8b67e833fc08
but, cant flash the device....

the virtualbox can read the device informations:

http://oi65.tinypic.com/jsjcys.jpg


After adding the usb and post settings in the virtualbox, i tried flashing the board wint ubuntu.
same as with windows. The device its in the ubuntu usb device list:

http://oi64.tinypic.com/2h2kqhg.jpg


but, if i like to flash the device, nothings happened. The flasher wait for the device...

http://oi63.tinypic.com/zwi52s.jpg


So.....
how can I find a solution for flashing this board?
Its any not public device driver to this device?
How can I flash the SH AUD31.bin?

Becouse i think the Tegra files loaded up correctly via USB stick. Now i must to give a "fastboot -w" command to the device, and then can booting correctly. I tried with

"fastboot -i 0x0955 -w command too". not working.
I think I must flashing the bin file with a eeprom félasher. I have eprom flasher, but the flasher can't flash this eeprom. find any eeprom flasher under 600$ for this

"25C512A" eeprom.


So.....
How can i unbrick tis device?
Any solution? :)


Thanks for the reply
Kind REgads,
Rocco