Honor 3C Vibrate only when connected to pc for flash

[Scepterus]

Hello, I've searched everywhere but can't find a solution to my problem. every bricked honor 3c that I read can be flashed, but when I connect mine to the pc to flash it sp fails and the computer makes a disconnected device sound.

does anyone have any idea how to flash the stock ROM on this phone in this state? I'd really hate to throw it away because of a software problem.

thanks and have a great day!

 

[mt_nik]

with windows 10 or 7?
if you use win 8 or 10 :
1- Open a Command Prompt with admin privileges. In Windows 10 or 8, just press the Windows key + X and then select “Command Prompt (Admin)”.
2- Type in the following command and press Enter.
bcdedit /set testsigning on


You should receive “The operation completed successfully” message. If you see a message saying the value is protected by Secure Boot policy, then you have to turn off Secure Boot in the UEFI/BIOS, before disabling Driver Signature Enforcement.

3- Close the Command Prompt and restart your computer. From now on, you will be able to install or run any unsigned driver without problems.
If you need to enable the Driver Signature Enforcement again, run this command instead:
bcdedit /set testsigning off

source

for win 7 reinstall Handset WinDriver.

 

[Scepterus]

with windows 10 or 7?
if you use win 8 or 10 :
1- Open a Command Prompt with admin privileges. In Windows 10 or 8, just press the Windows key + X and then select “Command Prompt (Admin)”.
2- Type in the following command and press Enter.
bcdedit /set testsigning on


You should receive “The operation completed successfully” message. If you see a message saying the value is protected by Secure Boot policy, then you have to turn off Secure Boot in the UEFI/BIOS, before disabling Driver Signature Enforcement.

3- Close the Command Prompt and restart your computer. From now on, you will be able to install or run any unsigned driver without problems.
If you need to enable the Driver Signature Enforcement again, run this command instead:
bcdedit /set testsigning off

source

for win 7 reinstall Handset WinDriver.

I don't know how you got faulty drivers from my problem. my problem isn't drivers, they're installed correctly, my problem is the phone not staying on enough for the software to flash before it reboots.