How to bypass KG State and/or RMM state prenormal

[Laiyox]

Hello Guys
I want to tell how to bypass RMM state: prenormal to install TWRP
Also this will resolve "Only official binaries are allowed"

Disclaimer​

:

I am NOT responsible for any damage done if you use my guide.​

It worked for me 100% and should normally work for everybody!
Feel free to share to anyone else or to embed if you want.

-------------------------------------------------
1. Download latest Stock base via SamFirm
2. Install latest Stock base via Odin Odin v3.13.1 direct download
3. Boot into system
4. Skip the setup
5. Activate Developer settings
6. search and turn of automatic system update
7. Go to time settings and deactivate automatic time
8. Turn back the day for more than 7 days. ( I have turned to the 20th Dec 2018)
9. Search for Software update -> Don't install update
10. Look if latest time searched for updates is the date which you have set. (for me 20th Dec 2018)
11. Reboot your device
12. go into the time settings and reactivate the automatic time
13. Search again for software update - > Still don't install
14. Go to Developer settings
15. deactivate OEM Unlock and reactivate
16. Go to download mode and you will don't see RMM state anymore
18. install TWRP by odin
19. boot into TWRP
20. format data
21. reboot recovery
22. flash verity.zip // found on https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
23. Et voilà! You got completely functional TWRP on your device with Pie Bootloader
24. Flash your preferred Rom!
-------------------------------------------------

Thanks to:
zxz0O0 for SamFirm
Have Fun

 

[LucasBernardesLopes]

this verity.zip is necessary? or can I flash another rom right after install twrp?

edit: by "update.zip" you mean the PIE Beta?

 

[Laiyox]

this verity.zip is necessary? or can I flash another rom right after install twrp?

edit: by "update.zip" you mean the PIE Beta?

It decrypt the Userdata.
Yes i mean the Pie Beta.

 

[alejobog]

It works perfect, I was worried because I could not find a solution, very good guide thank you very much

 

[tomaasz]

Hello Guys
-------------------------------------------------
1. Download CRL3 via Samfirm SamFirm Download from mega.nz
2. Install CRL3 via Odin Odin v3.13.1 direct download
3. Boot Stock CRL3 after install with Odin

Hi, I have nonroot CRLB. Is it neccessery to downgreade ?

 

[Laiyox]

Hi, I have nonroot CRLB. Is it neccessery to downgreade ?

I don't really know. The Beta was published while CRL3. So i think it is needed, but you can try. If it dont work you just can reflash CRL3 via Odin

 

[AndrzejDwo]

Hi, I have nonroot CRLB. Is it neccessery to downgreade ?

Following this thread you should be on CRL3.

https://forum.xda-developers.com/galaxy-s8/how-to/s8-exynos-pie-oneui-beta-official-t3890376

 

[kumarsk]

do we have to flash twrp after every pie beta update?

 

[Saathiss]

How to root s8plus 9.0 one ui

I need help root android 9.0 one ui s8plus ??

 

[talhagsm]

i followed everything 9.0 Pie beta also done but after format wipe OEM is gone.

actually i want to root my G955F but its showing error becous RMM status is Prenormal so i cant root my S8 plus
please guide me how to root after beta pie 9.0?

Thx.

 

[jameskunst]

i followed everything 9.0 Pie beta also done but after format wipe OEM is gone.

actually i want to root my G955F but its showing error becous RMM status is Prenormal so i cant root my S8 plus
please guide me how to root after beta pie 9.0?

Thx.

I have just written a new thread with a new method to bypass it:

https://forum.xda-developers.com/galaxy-s8/how-to/guide-skipping-kg-prenormal-oneui-t3911862

 

[Gazading]

How to install the crlb via odin

 

[kgr]

When I do this on Pie, the OEM Unlock toggle in Dev Options shows up. When I toggle it, it shows the following in download mode:
RMM STATE: Prenormal
KG STATE: Checking
FRP LOCK: OFF
OEM LOCK: OFF
And I am unable to flash TWRP or any custom binaries.

So I downgraded to Oreo, and followed the exact same steps as outlined and now I cannot get the OEM toggle to show up! And of course it says Prenormal in download... but not KG State.
RMM STATE: Prenormal
FRP LOCK: OFF
OEM LOCK: ON

WTF am I doing wrong??

 

[Laiyox]

When I do this on Pie, the OEM Unlock toggle in Dev Options shows up. When I toggle it, it shows the following in download mode:
RMM STATE: Prenormal
KG STATE: Checking
FRP LOCK: OFF
OEM LOCK: OFF
And I am unable to flash TWRP or any custom binaries.

So I downgraded to Oreo, and followed the exact same steps as outlined and now I cannot get the OEM toggle to show up! And of course it says Prenormal in download... but not KG State.
RMM STATE: Prenormal
FRP LOCK: OFF
OEM LOCK: ON

WTF am I doing wrong??

Did you did everything step by step?
If you miss any step it won't work

 

[kgr]

Did you did everything step by step?
If you miss any step it won't work

Yep absolutely followed the directions exactly. In the end I just wanted the 7 days

 

[Laiyox]

Yep absolutely followed the directions exactly. In the end I just wanted the 7 days

Also used latest Base?
I didn't update the thread to official Pie

 

[idkaname123]

can I still flash without root?

I have a J337VPP galaxy J3 running on android oreo 8.0.0 and the hardware version is J337v.04. it is non-rooted. Would I be able to do your steps without root? it has to be able to be done without root since the only way to root is by unlocking the bootloader using the OEM unlock (which I can't do because of this stupid RMM prenormal Samsung decided to create). Thanks! been trying to root different phone of mine for years to take complete control over annoying system apps! (atleast I already have Package Disabler Pro) Thanks again. Hope I can have help. I've heard of going to download mode and seting the date before RMM prenormal. I think I am good with tech but new to this RMM stuff.

---------- Post added at 12:18 AM ---------- Previous post was at 12:01 AM ----------

Turns out RMM state prenormal isn't in download mode/odin. Weird... maybe J3 doesn't support oem unlock

 

[Walkman100]

just tried this on SM-G950F (Galaxy S8), RMM state is still prenormal and I can't flash TWRP. I did have the oem unlock option available before doing this though, and had turned it on, but I'm on android 9 which might make a difference

 

[sahiljarral]

hiden oem option

Hello Guys
I want to tell how to bypass RMM state: prenormal to install TWRP
Also this will resolve "Only official binaries are allowed"

Disclaimer​

:

I am NOT responsible for any damage done if you use my guide.​

It worked for me 100% and should normally work for everybody!
Feel free to share to anyone else or to embed if you want.

-------------------------------------------------
1. Download latest Stock base via SamFirm
2. Install latest Stock base via Odin Odin v3.13.1 direct download
3. Boot into system
4. Skip the setup
5. Activate Developer settings
6. search and turn of automatic system update
7. Go to time settings and deactivate automatic time
8. Turn back the day for more than 7 days. ( I have turned to the 20th Dec 2018)
9. Search for Software update -> Don't install update
10. Look if latest time searched for updates is the date which you have set. (for me 20th Dec 2018)
11. Reboot your device
12. go into the time settings and reactivate the automatic time
13. Search again for software update - > Still don't install
14. Go to Developer settings
15. deactivate OEM Unlock and reactivate
16. Go to download mode and you will don't see RMM state anymore
18. install TWRP by odin
19. boot into TWRP
20. format data
21. reboot recovery
22. flash verity.zip // found on https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
23. Et voilà! You got completely functional TWRP on your device with Pie Bootloader
24. Flash your preferred Rom!
-------------------------------------------------

Thanks to:
zxz0O0 for SamFirm
Have Fun

when i do deactivate oem option ask for factory reset when i do then thereh is no oem option ?

 

[FabiusMod]

Hi guys, i have a problem with my S8 (SM-G950F), I want to flash twrp and a custom rom but I can't flash twrp because i have last update (1 september 2019), someone can help me? When I flash the twrp from odin I have FAIL ever, how can i fix kg state prenormal? I used adb and fastboot, i used odin, odin patched-b, princecomsy odin but I can't flash it. I used linux ubuntu 19 with Heimdall flash but it's the same. Thanks in advance.