Install SAMSUNG KIES AND USB Drivers for Samsung Galaxy Note to connect the Android device with the computer.
Enable USB Debugging Mode on phone to connect it with the computer.
[Navigate to Settings>> About phone>> tap Build number seven times. A pop up will appear, that reads, ‘You are now a developer.’ Go back to the Developer options and check USB debugging and click OK.]
As the tutorial is likely to wipe out all data of the phone, create a backup. If the device is having any custom recoveries such as CWM/TWRP then backup data using the same.
If the Android phone powers off due to lack of battery while the installation process, it could damage the device. Therefore, the Note 4 should have charge above 80% battery charge.
How to Update Samsung Galaxy Note [SHV-E160L]
Step-1: Download Rom : E160L_to_N7000_4.4.2_S5_Menukhmer.tar to put on your Computer
Step-2: Extract the downloaded zip to your computer
Step-3: Download Odin v3.09 and extract the zip
Step-4: Power off the Galaxy Note
Step-5: Put the phone in download mode. To do so hold Volume Down, Home and Power buttons
together. Press a button from the listed menu when it ask to do so to continue the process
Step-6: Connect the phone to the computer using USB cable while it is in the download mode. Wait for some time until Odin detects the device. When the phone is connected successfully, the ID: COM box in Odin will turn light blue with COM port number. This step might take some time
Step-7: In Odin, click AP button and select the firmware file with E160L_to_N7000_4.4.2_S5_Menukhmer.tar extension
Step-8: Ensure Re-Partition checkbox is not ticked
Step-9: Verify everything and click the Start button in Odin
Step-10: Wait for some time until the installation process is completed then boot the phone
The Galaxy Note should now be Update successfully.
DOWNLOAD :
click here
