How to disable internal MIC?

[firstbob]

On my unit (TS10, but I think this applies to all units with external wire harness) I noticed that internal MIC (one build in to the panel) is on when external MIC is plugged in. Is there a way to disable minternal microphone in software?

 

[drisslar]

On my unit (TS10, but I think this applies to all units with external wire harness) I noticed that internal MIC (one build in to the panel) is on when external MIC is plugged in. Is there a way to disable minternal microphone in software?

Головные устройства TEYES - Аппаратная модификация, автозвук, брак и ремонт - 4PDA

Головные устройства TEYES - Аппаратная модификация, автозвук, брак и ремонт, [Головное устройство][Автомагнитола][Android]

4pda.to

use google traduction to russe.

 

[firstbob]

Головные устройства TEYES - Аппаратная модификация, автозвук, брак и ремонт - 4PDA

Головные устройства TEYES - Аппаратная модификация, автозвук, брак и ремонт, [Головное устройство][Автомагнитола][Android]

4pda.to

use google traduction to russe.

Thanks. I removed the microphone from the LED board. There's definitively less noise as external microphone is directional.

 

[peroporfarvo]

I have an external microphone connected to the computer, but I have a problem with calls and that is that when I talk on the phone, the person I call hears himself, he hears everything he says

 

[TorstenH]

Don't think there is much difference to a Junsun head unit:

Post in thread 'Junsun V1 MTK8259 - the adapter battle (Kia Ceed Jd) / OEM camera usage / reference thread' https://forum.xda-developers.com/t/...-usage-reference-thread.4236281/post-87970225

 

[peroporfarvo]

I do not have a soldering iron nor have I ever used one, if I cut a cable from the microphone would be enough, if it is cut it can simply be harmful to the equipment. Thaks

 

[TorstenH]

I do not have a soldering iron nor have I ever used one, if I cut a cable from the microphone would be enough, if it is cut it can simply be harmful to the equipment. Thaks

It may be possible the mic is soldered directly on the board and there are no wires you can cut. This depends on the head unit revision and can be different for the same model of the same vendor.