I've just tested a method from the OP3T forum for reset the DM-verity and removing the second(with red colour) screen on booting.
I'm currently on LAOS and I've TWRP, so you don't need to be completely stock for this to work
Installation:
For 4.0.2 - Do the steps 4 and 5 and just boot your phone.
For 4.0.3 and up - Do all the steps
1) Boot to Recovery
2) Flash 4.0.2 firmware + modem / FOR OP3 / FOR OP3T
3) Reboot to bootloader
4) Use the commands ( result was Okay for each command)
fastboot oem disable_dm_verity
fastboot oem enable_dm_verity
5) Reboot to Recovery
6) Flash your current firmware + modem
7) Reboot to system
Nothing will be deleted from your storage or something like this, its safe(at least on my device
)
Credits to @jamal2367 and @djsubterrain for the firmware zips and to @hyperorb for testing and providing the steps
All credits for founding the commands to @th3g1z
I'm currently on LAOS and I've TWRP, so you don't need to be completely stock for this to work
Installation:
For 4.0.2 - Do the steps 4 and 5 and just boot your phone.
For 4.0.3 and up - Do all the steps
1) Boot to Recovery
2) Flash 4.0.2 firmware + modem / FOR OP3 / FOR OP3T
3) Reboot to bootloader
4) Use the commands ( result was Okay for each command)
fastboot oem disable_dm_verity
fastboot oem enable_dm_verity
5) Reboot to Recovery
6) Flash your current firmware + modem
7) Reboot to system
Nothing will be deleted from your storage or something like this, its safe(at least on my device
Credits to @jamal2367 and @djsubterrain for the firmware zips and to @hyperorb for testing and providing the steps
All credits for founding the commands to @th3g1z
Last edited: