For those who haven't used ODIN, the process can seem a bit daunting. Follow these steps to make flashing files via ODIN painless...
Reasons To Use This Tutorial
- Return your device to OEM Stock for warranty return
- Flash latest OTA Leak or revert firmware (ie; MJE, NC2, etc)
- Completely wipe device prior to private sale
- Return device to stock
- You're a bored crack-flasher with nothing better to do
* * * What you do with your device is completely your choice and solely your responsibility! - If You READ These Instructions FIRST, THEN Follow Them, You Will Be Up And Running In No Time* * *
STEP ONE:
Verify USB DEBUGGING is CHECKED in system settings>developer option (click 'BASEBAND or BUILD Version' in 'About Phone' 7 times to UNHIDE Developer Option) also verify UNKNOWN SOURCES is CHECKED in system settings>security.
On PC, go to CONTROL PANEL > Install/Uninstall Programs > uninstall ALL Samsung drivers
Download & Install The Following To Your PC
Samsung USB drivers for Odin (click “see all downloads”)
ODIN (latest version)
click middle “download” button - credit to DutchDogg54 for file
MJE Tar File (flash ONLY tar files for YOUR device)
credit to Beanstown106 for file (confirm Developer Edition or Retail device)
Verizon LTE PIT file
credit to Beanstown106 for file (confirm device)
STEP TWO:
Flash File In ODIN
- Power down your device (remove sdcard - not required but recommended)
- Simultaneously press and hold VOL DOWN + HOME BUTTON + POWER BUTTON
- At *Warning* screen, press VOL UP
- Start ODIN on PC
- Connect your device to its USB cable and plug cable into PC
- WAIT for ODIN to populate the COM box (pic 1)
- Verify that "Auto Reboot" and "F. Reset Time" are CHECKED (under COM box in Option section - pic 1)
- Click "AP" button (PDA if older Odin) (pic 2)
- Browse PC and insert file to be flashed (MJE tar file)
- Click "PIT" button *USE ONLY IF YOU HAVE PARTITION ISSUES* (pic 3)
- Browse PC and insert file to be flashed (PIT file)
- WAIT for "START" button (pic 4) to be enabled (may take a minute)
- Click START button to begin file install
- Disconnect USB when download is finished (device might auto reboot)
Profit, BACON & Joy you are now on MJE and your device is STOCK.
PERFORM A FACTORY RESET WIPING ENTIRE PHONE
This should return your device to "out-of-the-box" newness (remove ext SDcard)
- Turn off device
- Simultaneously hold VOL UP, HOME, POWER
- Release POWER when you see the Note 3 logo
- Release VOL UP & HOME when you see the System Recovery screen
- VOL UP after warning
- Using VOL DOWN choose WIPE DATA / FACTORY RESET
- Select using POWER button
- Using VOL DOWN choose "Delete ALL User Data"
- Select with POWER button
- Highlight REBOOT SYSTEM
- Select REBOOT SYSTEM NOW using POWER button
-Your device is now OEM Stock and ready to ship for warranty purposes, OR you can start over with a totally OEM stock device HERE> How To ROOT 4.3 & NC4 OTA, Install Recovery & Roms - Verizon RETAIL Note 3
Click HERE to Root, install Safestrap, update Chainfire's SuperSU, flash custom Roms, and learn about Rom Slots!
***Please click THANKS and RATE this thread***
]
Reasons To Use This Tutorial
- Return your device to OEM Stock for warranty return
- Flash latest OTA Leak or revert firmware (ie; MJE, NC2, etc)
- Completely wipe device prior to private sale
- Return device to stock
- You're a bored crack-flasher with nothing better to do
* * * What you do with your device is completely your choice and solely your responsibility! - If You READ These Instructions FIRST, THEN Follow Them, You Will Be Up And Running In No Time* * *
STEP ONE:
Verify USB DEBUGGING is CHECKED in system settings>developer option (click 'BASEBAND or BUILD Version' in 'About Phone' 7 times to UNHIDE Developer Option) also verify UNKNOWN SOURCES is CHECKED in system settings>security.
On PC, go to CONTROL PANEL > Install/Uninstall Programs > uninstall ALL Samsung drivers
Download & Install The Following To Your PC
Samsung USB drivers for Odin (click “see all downloads”)
ODIN (latest version)
click middle “download” button - credit to DutchDogg54 for file
MJE Tar File (flash ONLY tar files for YOUR device)
credit to Beanstown106 for file (confirm Developer Edition or Retail device)
Verizon LTE PIT file
credit to Beanstown106 for file (confirm device)
STEP TWO:
Flash File In ODIN
- Power down your device (remove sdcard - not required but recommended)
- Simultaneously press and hold VOL DOWN + HOME BUTTON + POWER BUTTON
- At *Warning* screen, press VOL UP
- Start ODIN on PC
- Connect your device to its USB cable and plug cable into PC
- WAIT for ODIN to populate the COM box (pic 1)
- Verify that "Auto Reboot" and "F. Reset Time" are CHECKED (under COM box in Option section - pic 1)
- Click "AP" button (PDA if older Odin) (pic 2)
- Browse PC and insert file to be flashed (MJE tar file)
- Click "PIT" button *USE ONLY IF YOU HAVE PARTITION ISSUES* (pic 3)
- Browse PC and insert file to be flashed (PIT file)
- WAIT for "START" button (pic 4) to be enabled (may take a minute)
- Click START button to begin file install
- Disconnect USB when download is finished (device might auto reboot)
Profit, BACON & Joy you are now on MJE and your device is STOCK.
PERFORM A FACTORY RESET WIPING ENTIRE PHONE
This should return your device to "out-of-the-box" newness (remove ext SDcard)
- Turn off device
- Simultaneously hold VOL UP, HOME, POWER
- Release POWER when you see the Note 3 logo
- Release VOL UP & HOME when you see the System Recovery screen
- VOL UP after warning
- Using VOL DOWN choose WIPE DATA / FACTORY RESET
- Select using POWER button
- Using VOL DOWN choose "Delete ALL User Data"
- Select with POWER button
- Highlight REBOOT SYSTEM
- Select REBOOT SYSTEM NOW using POWER button
-Your device is now OEM Stock and ready to ship for warranty purposes, OR you can start over with a totally OEM stock device HERE> How To ROOT 4.3 & NC4 OTA, Install Recovery & Roms - Verizon RETAIL Note 3
Click HERE to Root, install Safestrap, update Chainfire's SuperSU, flash custom Roms, and learn about Rom Slots!
***Please click THANKS and RATE this thread***
Last edited: