How to Flash/Unbrick/Restore Huawei Y6 II [LYO-L01] Full Stock Rom UPDATE.APP

[AbdeLMounimKarnain]

Step 1 : Download the official full firmware and , huaweiupdateextract tool and huawei multi tool by team mt from this Link : Remove ** the asterix to find the good url **petty.link/HuaweiY6iiLYOL011**

Step : 2
Install both tools Extract the downloaded firmware until you see the UPDATE.APP file Open the huawei extract tool and load UPDATE.APP

Step : 3
Extract the following Files from the UPDATE.APP files: BOOT.img, CUST.img, RECOVERY.img,SYSTEM.img, USERDATA.img Copy or simply move those images into one folder

Step : 4
Start phone into fastboot mode switch off the device After that press and hold Volume Down for a while. Then connect your smartphone to the PC by using Micro USB Cabel while holding Volume Down

Step : 5
Start the Huawei Multi-Tool and enter Unbrick menu and click on specify folder and select the folder don't forget to change BOOTING.img.header to BOOT.img.header, BOOTING to BOOT
The last Step :
click on unbrick and wait , after the flash is finished don't mind the errors , turn on your phone wait the boot process and your done.
After complete flashing stock firmware you can download the official update under Settings -> Updater! congratulations you are all done now


You can use these firmware to: Update Huawei Y6 II Compact LYO-L01 Downgrade Huawei Y6 II Compact LYO-L01 Rollback firmware Huawei Y6 II Compact LYO-L01 Unroot Huawei Y6 II Compact LYO-L01 Unbrick Huawei Y6 II Compact LYO-L01 Restore Huawei Y6 II Compact LYO-L01 Fix Unknown IMEI Huawei Y6 II Compact LYO-L01 Repair firmware solutions for Huawei Y6 II Compact LYO-L01 if boot loop, Hard brick, Lost recovery, or can’t boot to home screen, etc.

 

[musan]

Step 1 : Download the official full firmware and , huaweiupdateextract tool and huawei multi tool by team mt from this Link : apparently I can't post links because I am a new member P.M. me to get it or check out the comments and you 'll get it

Step : 2
Install both tools Extract the downloaded firmware until you see the UPDATE.APP file Open the huawei extract tool and load UPDATE.APP

Step : 3
Extract the following Files from the UPDATE.APP files: BOOT.img, CUST.img, RECOVERY.img,SYSTEM.img, USERDATA.img Copy or simply move those images into one folder

Step : 4
Start phone into fastboot mode switch off the device After that press and hold Volume Down for a while. Then connect your smartphone to the PC by using Micro USB Cabel while holding Volume Down

Step : 5
Start the Huawei Multi-Tool and enter Unbrick menu and click on specify folder and select the folder don't forget to change BOOTING.img.header to BOOT.img.header, BOOTING to BOOT
The last Step :
click on unbrick and wait , after the flash is finished don't mind the errors , turn on your phone wait the boot process and your done.
After complete flashing stock firmware you can download the official update under Settings -> Updater! congratulations you are all done now


You can use these firmware to: Update Huawei Y6 II Compact LYO-L01 Downgrade Huawei Y6 II Compact LYO-L01 Rollback firmware Huawei Y6 II Compact LYO-L01 Unroot Huawei Y6 II Compact LYO-L01 Unbrick Huawei Y6 II Compact LYO-L01 Restore Huawei Y6 II Compact LYO-L01 Fix Unknown IMEI Huawei Y6 II Compact LYO-L01 Repair firmware solutions for Huawei Y6 II Compact LYO-L01 if boot loop, Hard brick, Lost recovery, or can’t boot to home screen, etc.

Is it possible to make sim unlock with this tool?

Sent from my HUAWEI SCL-L21 using Tapatalk

 

[AbdeLMounimKarnain]

No , I am afraid not ,

This tool is not related to SIM unlocks , sorry

 

[ahsanraza]

Huawei Y6 2015 stuck in boot loop. Help needed!

My Y6 2015 stuck in bootloop. I downloaded multiple stock ROMs and tried the above method but every time I try to unbrick it says

FAILED (remote: Necessary to unlock FRP! Navigate to Settings > Developer op) finished.

Seems like I haven't turned on the Developer options but I suppose I don't need it until Im flashing it with custom ROM.
PS I can only put it in fastboot mode. No recovery mode or anything. Help needed.

 

[Ceejyahn]

Can I UNBRICK my ATU-L22???
thank you!

 

[ianreesdavies]

unbrick

Can I UNBRICK my ATU-L22???
thank you!

huawei multitool 8 found mine in fastboot mode, unpacked the stock firmware and flashed it for me.
XTM Miracle Thunder 2.82....the free version can do several jobs in fastboot but DC unlocker, pheonix tool can fix bricked huawei mobiles.
Good luck.