• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

HOW TO GET [ANDROID 12] [Pixel 5 GSI] ON YOUR S10+ (Exynos) (maybe any android phone)

Search This thread

pegaaus

Member
Dec 13, 2018
22
6
Hello everyone,
This guide will show you how to get android 12 for S10+ ( cuz i only tested it on my s10+)

What you'll need before this guide :
-Unlocked bootloader
-TWRP installed
- know and believe that I'm not responsible for any thing it's on your own risk (your warranty is void and knox is dead )
---------------------------------------------------------
If you don't have TWRP installed or unlocked bootloader I'll tell you in brief:

•Bootloader: get developer options and toggle unlock bootloader option (if you don't find it it's okay) - then shutdown your phone and connect it to your pc while pressing down the key combination (power -Vol down- Bixby). Then follow the steps to unlock the bootloader.

• TWRP : go to official twrp site and download the corresponding file to your device in (img.tar) format .. open odin and apply this twrp file to AP slot and uncheck auto reboot option in odin then flash!. It will flash the recovery if it fails you'll have to flash Vbmeta disbler before TWRP.

---------------------------------
NOW LET'S GET TO THE REAL THING:
You should download the following:

1- Linage OS official for s10+ (we'll use it as a vendor)

2- The pixel 5 System image
Beta 3.1 build SPB3.210618.016
(original ,untouched)


Steps:

You must have bootloader unlocked
And Twrp installed By this point

1- Just fully clean your Device ( wipe everything and erase everything)

2- flash Linage OS official rom and reboot to system

3- Never update the recovery during Initial setup of linage OS because it will replace TWRP and you'll have to reflash TWRP with Odin again.

4-get back to TWRP and then Wipe data to remove encryption then - Advanced wipe ( Cache , Dalvik , System )

5- Flash the system.Img i made for you as (system)

6- reboot to system and you should be perfectly fine
_---------------------------------------
I'm just sharing what i did to my phone to run android 12 after experimenting many failure trials.
I'm not responsible for any thing happens to your phone and I'm sure you'll be fine.(if your a galaxy s10+ exynos OFC)

#Pegasus

UPDATE:
update to beta 4 pixel 5.

Download the system.img:

and dirty flash it. if anything goes wrong get back to twrp and whip system partition and flash the beta 4.
Credits for Beta 4:
Thanks to @Xiaoxindada For His Tool. Also thanks to @erfanoabdi and @nnippon.
BETA 4 IS Ported by @GSITutorials
 

Attachments

  • 1628611765690.png
    1628611765690.png
    1 MB · Views: 383
  • 1628611758267.png
    1628611758267.png
    1.8 MB · Views: 367
  • 1628611537298.png
    1628611537298.png
    351 KB · Views: 349
  • 1628611518716.png
    1628611518716.png
    3 MB · Views: 326
  • 1628611508311.png
    1628611508311.png
    540 KB · Views: 312
  • 1628611530579.png
    1628611530579.png
    3 MB · Views: 292
  • 1628611525366.png
    1628611525366.png
    2.8 MB · Views: 277
  • Screenshot_20210810-180423.png
    Screenshot_20210810-180423.png
    160.3 KB · Views: 397
Last edited:
  • Like
Reactions: crazyof

Didyme

Member
Nov 19, 2015
8
3
Bordeaux
Wow awesome. Thank you for the work !
I have a question : does VoWifi and/or VoLTE works for you with this GSI ? One of the screenshots seems to have the VoWifi icon in the status bar.
 
Ok I already did it and up now it work, at least here in México, maybe it is not for everyone due to is only in English, so the signal wifi an almost y very fine, I always use a custom room what reach the pixel experience but now I have it. While work the call and vendor data... The rest is ok, I will continue testing and anything what goes wrong I will let you know. Just one comment at least for my phone before flash img, it is needed wipe - format - text "yes" and after that flash and now works.
 

Attachments

  • Screenshot_20210927-212731.png
    Screenshot_20210927-212731.png
    140.9 KB · Views: 90
  • Screenshot_20210927-212622.png
    Screenshot_20210927-212622.png
    870.1 KB · Views: 93
  • Screenshot_20210927-212605.png
    Screenshot_20210927-212605.png
    219.9 KB · Views: 84
  • Screenshot_20210927-212614.png
    Screenshot_20210927-212614.png
    149 KB · Views: 81
  • Screenshot_20210927-212545.png
    Screenshot_20210927-212545.png
    1.8 MB · Views: 85

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Hello everyone,
    This guide will show you how to get android 12 for S10+ ( cuz i only tested it on my s10+)

    What you'll need before this guide :
    -Unlocked bootloader
    -TWRP installed
    - know and believe that I'm not responsible for any thing it's on your own risk (your warranty is void and knox is dead )
    ---------------------------------------------------------
    If you don't have TWRP installed or unlocked bootloader I'll tell you in brief:

    •Bootloader: get developer options and toggle unlock bootloader option (if you don't find it it's okay) - then shutdown your phone and connect it to your pc while pressing down the key combination (power -Vol down- Bixby). Then follow the steps to unlock the bootloader.

    • TWRP : go to official twrp site and download the corresponding file to your device in (img.tar) format .. open odin and apply this twrp file to AP slot and uncheck auto reboot option in odin then flash!. It will flash the recovery if it fails you'll have to flash Vbmeta disbler before TWRP.

    ---------------------------------
    NOW LET'S GET TO THE REAL THING:
    You should download the following:

    1- Linage OS official for s10+ (we'll use it as a vendor)

    2- The pixel 5 System image
    Beta 3.1 build SPB3.210618.016
    (original ,untouched)


    Steps:

    You must have bootloader unlocked
    And Twrp installed By this point

    1- Just fully clean your Device ( wipe everything and erase everything)

    2- flash Linage OS official rom and reboot to system

    3- Never update the recovery during Initial setup of linage OS because it will replace TWRP and you'll have to reflash TWRP with Odin again.

    4-get back to TWRP and then Wipe data to remove encryption then - Advanced wipe ( Cache , Dalvik , System )

    5- Flash the system.Img i made for you as (system)

    6- reboot to system and you should be perfectly fine
    _---------------------------------------
    I'm just sharing what i did to my phone to run android 12 after experimenting many failure trials.
    I'm not responsible for any thing happens to your phone and I'm sure you'll be fine.(if your a galaxy s10+ exynos OFC)

    #Pegasus

    UPDATE:
    update to beta 4 pixel 5.

    Download the system.img:

    and dirty flash it. if anything goes wrong get back to twrp and whip system partition and flash the beta 4.
    Credits for Beta 4:
    Thanks to @Xiaoxindada For His Tool. Also thanks to @erfanoabdi and @nnippon.
    BETA 4 IS Ported by @GSITutorials
    1
    Worked perfectly!!! Thank you very much, I've been trying for weeks to install Android 12 and I haven't been successful so far!