How to get your sprint note 3 msl!!!

[robhuffster]

alright I have only tested this on the MI3 firmware, but I have tested it on rooted and stock and both worked. I have sucessfully gotten the MSL without sprint and I also changed it to 000000. Ok so here are the instructions....

MAKE SURE YOU FOLLOW STEPS VERY CAREFULLY, BECAUSE THEY WORK IF YOU DO EXACTLY AS I DO, I HAVE TESTED ON 3 DIFFERENT NOTE 3 NOW AND IT WORKED ON ALL 3 OF THEM.

Ok so first make sure usb debugging is on and unknown sources and that your using the newest adb out and that you have adb access.

next make sure you are on mtp+adb, I havent been able to get it working if diag is enabled so dont enable it.

ok now open the file GETMSL.bat, and its going to run a logcat in the background thats fineas long as its running thats all you need.

VERY IMPORTANT, if you dont do this exactly it wont work ok.

DIAL ##3424# not ##3282# only ##3424# will work, and then click edit or enter msl and then MAKE SURE you put 123456 as the password. Nothing else works that I have tried so it has to be 123456 and then click ok.

Its going to give you a bad spc error, thats fine press back till your at the home screen and sit and wait for 5 seconds. After that unplug your cable from the phone and read the command prompt for your msl. THIS WORKS but you have to follow exactly.

Thanks for everyone who let me get there msl over team viewer and get this fine tuned. If you have questions or need help just let me know Ill be glad to assist you in any way I can.

 

[heixiuyo]

E:\Download\Mobile\N900P\GETMSL>findstr "I/MSL_Checker( 1166):" logcat.txt
I/MSL_Checker( 1185): onCreate
I/MSL_Checker( 1185): onCreate2
I/MSL_Checker( 1185): hdata_edit
I/MSL_Checker( 1185): Chameleon diag valuenull
I/MSL_Checker( 1185): Chameleon Check value2false
I/MSL_Checker( 1185): connect To Secphone service
I/MSL_Checker( 1185): onCreate1
I/MSL_Checker( 1185): hdata_edit
I/MSL_Checker( 1185): hdata_edit
I/MSL_Checker( 1185): Enter checkMSLCode
I/MSL_Checker( 1185): success to write
I/MSL_Checker( 1185): End checkMSLData
I/MSL_Checker( 1185): error=0
I/MSL_Checker( 1185): size of result : 14

 

[robhuffster]

E:\Download\Mobile\N900P\GETMSL>findstr "I/MSL_Checker( 1166):" logcat.txt
I/MSL_Checker( 1185): onCreate
I/MSL_Checker( 1185): onCreate2
I/MSL_Checker( 1185): hdata_edit
I/MSL_Checker( 1185): Chameleon diag valuenull
I/MSL_Checker( 1185): Chameleon Check value2false
I/MSL_Checker( 1185): connect To Secphone service
I/MSL_Checker( 1185): onCreate1
I/MSL_Checker( 1185): hdata_edit
I/MSL_Checker( 1185): hdata_edit
I/MSL_Checker( 1185): Enter checkMSLCode
I/MSL_Checker( 1185): success to write
I/MSL_Checker( 1185): End checkMSLData
I/MSL_Checker( 1185): error=0
I/MSL_Checker( 1185): size of result : 14

what build are u on? Is your kernel stock??

 

[heixiuyo]

what build are u on? Is your kernel stock??

JSS15J.N900PVPUBMI3


dial # # 3424 # does not require input MSL，I use dial # # 3282 #, get this result

 

[hkleiner]

Will this work on mj5

 

[robhuffster]

for most people on MI3 ##3424# does require msl, and im not sure if it works on other builds, give it a try and let me know, I have only had mine to do this too and there might be other steps that are required to do this let me know if it doesnt work and ill post other steps

 

[hkleiner]

Ran on my phone and couldn't find the msl line. Msl checker is on there though.

 

[robhuffster]

Ran on my phone and couldn't find the msl line. Msl checker is on there though.

alright well i hope you have root cause you will need it now if you pull your /data/system/packages.xml and send it to me (just use adb pull /data/system/packages.xml if it gives you a permission error then do adb remount first, of that doesnt work then download this apk here and browse to the location and copy it to your sd card and then send it and Ill edit the files necassary to get your msl to show up.

 

[hkleiner]

I am rooted yes. Could also just let me know what lines to change.

---------- Post added at 10:26 PM ---------- Previous post was at 10:21 PM ----------

Link for xml
https://db.tt/mLAMZsNf

 

[robhuffster]

the first post has been updated and is working

 

[hkleiner]

Has not worked yet, even with the hidden menu enabled.

 

[robhuffster]

Has not worked yet, even with the hidden menu enabled.

its probably because your not on MI3? heres my file if anyone wants to use it and then run the script ill show you what it does!!

look at my pictures after i change those settings

it shows my msl

 

[hkleiner]

Anyone confirm this works? I am downloading mi3 but I have a feeling that won't change anything.

---------- Post added at 06:12 AM ---------- Previous post was at 06:09 AM ----------

I never saw the phonutil_vmu line. I enabled the hidden menu. What am I missing.

 

[robhuffster]

Anyone confirm this works? I am downloading mi3 but I have a feeling that won't change anything.

---------- Post added at 06:12 AM ---------- Previous post was at 06:09 AM ----------

I never saw the phonutil_vmu line. I enabled the hidden menu. What am I missing.

hey you have to do ##3424# ok dont do ##3282# becuase it doesnt work and it does work using ##3424#

 

[javed91214]

hey you have to do ##3424# ok dont do ##3282# becuase it doesnt work and it does work using ##3424#

I got the MSL code. Thanks a lot

 

[javed91214]

Root Not Required

Here is some steps which i used.

1. enable USB debug
2. connect phone with the pc , it will ask you for permission. click on check box & Ok.
3. run the cmd "adb devices" it will show you (see screenshot)
List of devices attached
0f3ab02x device

if not(offline) pl update your adb tool. search on Google "latest adb for 4.3 or 4.2.2 android".

4. Copy GETMSL.bat into adb folder & run
5. Dial ##3424# enter 123456
6. cmd will not show you any output.
7. goto adb folder & open logcat.txt file (dnt close cmd)
8. search "I/MSL_Checker" press enter 4-5 times & you'll get the MSL code.(see screenshot)

Special Thanks to "robhuffster"

 

[ghettowar04]

adb tools link for note 3

what is the link to adb tools for the note 3

Root Not Required

Here is some steps which i used.

1. enable USB debug
2. connect phone with the pc , it will ask you for permission. click on check box & Ok.
3. run the cmd "adb devices" it will show you (see screenshot)
List of devices attached
0f3ab02x device

if not(offline) pl update your adb tool. search on Google "latest adb for 4.3 or 4.2.2 android".

4. Copy GETMSL.bat into adb folder & run
5. Dial ##3424# enter 123456
6. cmd will not show you any output.
7. goto adb folder & open logcat.txt file (dnt close cmd)
8. search "I/MSL_Checker" press enter 4-5 times & you'll get the MSL code.(see screenshot)

Special Thanks to "robhuffster"[/QUO

 

[javed91214]

what is the link to adb tools for the note 3

Root Not Required

Here is some steps which i used.

1. enable USB debug
2. connect phone with the pc , it will ask you for permission. click on check box & Ok.
3. run the cmd "adb devices" it will show you (see screenshot)
List of devices attached
0f3ab02x device

if not(offline) pl update your adb tool. search on Google "latest adb for 4.3 or 4.2.2 android".

4. Copy GETMSL.bat into adb folder & run
5. Dial ##3424# enter 123456
6. cmd will not show you any output.
7. goto adb folder & open logcat.txt file (dnt close cmd)
8. search "I/MSL_Checker" press enter 4-5 times & you'll get the MSL code.(see screenshot)

Special Thanks to "robhuffster"[/QUO

 

[heixiuyo]

hey you have to do ##3424# ok dont do ##3282# becuase it doesnt work and it does work using ##3424#

How can # # 3424 # ok?##3424# does require msl。

 

[hkleiner]

How can # # 3424 # ok?##3424# does require msl。

##3424# does not require msl for me on jellybomb.