How to install Stock rom for bricked Android One by using 'Fastboot'? (Links updated)

androidoverdoze

Senior Member
May 16, 2015
73
36
0
Bankura
Bricked your Android one?? Can't install or phone not getting detected by SP Flash tool? Don't worry. This is the common problem for many users including me. My phone was not getting detected by SP flash tool. I tried many ways so that my phone gets detected, but I failed. Then I read about the 'Fastboot' method and got success. Now I am sharing the whole method with you all.
At first you will need the Adb fastboot Programs only, Adb Driver, The device driver and the Stock ROM of android one.
Last but not the least, an android one with the bootloader unlocked.
Now you are ready lets begin with the procedure.
1) Extract the 'Adb fastboot Programs only' in a folder any where in the PC (Better make a folder in the desktop and extract there).
2) Install the drivers.
3) Extract the rom and then copy the 'system.img', 'userdata.img', 'boot.img', 'recovery.img', 'bootloader.img' and 'cache.img' to the 'Adb fastboot Programs only' folder.
4) Now turn on the phone by pressing the volume up and the power button simultaneously, which will bring you to the bootloader menu. There go to the fastboot option by pressing the volume up button and selecting it by pressing the volume down button. This will activate fastboot mode. Now connect the phone with the PC via USB.
5) Open the 'Adb fastboot Programs only' folder. There press shift key and right click and select 'Open command window here' option. Command prompt will open. Now there follow these simple commands.
6) i)
Code:
fastboot flash system system.img
press enter. When it completes........
ii)
Code:
fastboot flash userdata userdata.img
press enter. When it completes........
iii)
Code:
fastboot flash boot boot.img
press enter. When it completes........
iv)
Code:
fastboot flash recovery recovery.img
press enter. When it completes........
v)
Code:
fastboot erase cache
press enter. When it completes........
vi)
Code:
fastboot flash cache cache.img
press enter. When it completes........
vii)
Code:
fastboot flash bootloader bootloader.img
press enter.
viii)
Code:
fastboot reboot
press enter.
7) Now you are done. Wait for at least 10 mins. as the initial boot takes time.
If there is any problem let me know.
If I helped you press the "Thanks' button. :D
 
Last edited:

andywoody12

Senior Member
Jun 27, 2015
163
3
0
Will it work on any devices? I don't know where this bootloader is. I only have stock system recovery and everytime I flash i get error like "installation aborted " I also use spflash tools but it cant detect my phone. By the way can i use an option in my system recovery like "install using adb" to flash using your way?
Please submit a reply.
Thanks
(*゚▽゚)ノ

sent from xda app in my s710 using tapatalk . (*゚▽゚)ノ
 

androidoverdoze

Senior Member
May 16, 2015
73
36
0
Bankura
Will it work on any devices? I don't know where this bootloader is. I only have stock system recovery and everytime I flash i get error like "installation aborted " I also use spflash tools but it cant detect my phone. By the way can i use an option in my system recovery like "install using adb" to flash using your way?
Please submit a reply.
Thanks
(*゚▽゚)ノ

sent from xda app in my s710 using tapatalk . (*゚▽゚)ノ
Sorry for the late reply. May I know what is the model of your device? You will need to go to the fastboot mode.
Install using adb works only for .zip files not for .img files. And also there are separate codes for adb method. At first I need to know your device model.
 
Last edited:

andywoody12

Senior Member
Jun 27, 2015
163
3
0
Sorry for the late reply. May I know what is the model of your device? You will need to go to the fastboot mode.
Install using adb works only for .zip files not for .img files. And also there are separate codes for adb method. At first I need to know your device model.
Oh. Ty for response... I already manage to learn... I only forgot the "bootloader" but.. Can i use your method in other chipset as like the A33? Because i cant find a cwm recovery for it to test on this device chipset...

Sent from my S710 using XDA Free mobile app
 

androidoverdoze

Senior Member
May 16, 2015
73
36
0
Bankura
Oh. Ty for response... I already manage to learn... I only forgot the "bootloader" but.. Can i use your method in other chipset as like the A33? Because i cant find a cwm recovery for it to test on this device chipset...

Sent from my S710 using XDA Free mobile app
Yes, you can, if you can get access to the bootloader menu.
Can you please provide you device name so that I can help you more accurately? :eek:
 

andywoody12

Senior Member
Jun 27, 2015
163
3
0
Yes, you can, if you can get access to the bootloader menu.
Can you please provide you device name so that I can help you more accurately? :eek:
This device is not popular because i bought it local.. Device name: Royqueen
Device model: rq739
Device chipset: allwinner A33
Stock recovery, no cwm for it. Does anyone already made a recovery system for it?

Sent from my S710 using XDA Free mobile app
 
Last edited:

androidoverdoze

Senior Member
May 16, 2015
73
36
0
Bankura
This device is not popular because i bought it local.. Device name: Royqueen
Device model: rq739
Device chipset: allwinner A33
Stock recovery, no cwm for it. Does anyone already made a recovery system for it?

Sent from my S710 using XDA Free mobile app
So, its a tablet pc. Ok if you can get access to the bootloader menu then only my procedure is possible.Actually you do not need any CWM recovery for getting into the bootloader menu. It comes up when you switch on your device by pressing the volume up and the power button at the same time.
 
Last edited:

AgentJT

Member
Feb 9, 2013
6
0
0
Gandhinagar
Help needed !!

I'm happy to hear it that, it helped. I'm glad to help you. If have any problem just let me know it. I will help you.
My Android One is bricked. Whenever I try to flash any custom recovery or ROM, it shows "Partition Table does not exist", but I want to try your method. I have MarshMallow Stock ROM and CM13. Tell me how do I get all these required image files as I am not able to find them. Please reply asap [Puppy eyes, if they help :fingers-crossed: ]
 

androidoverdoze

Senior Member
May 16, 2015
73
36
0
Bankura
My Android One is bricked. Whenever I try to flash any custom recovery or ROM, it shows "Partition Table does not exist", but I want to try your method. I have MarshMallow Stock ROM and CM13. Tell me how do I get all these required image files as I am not able to find them. Please reply asap [Puppy eyes, if they help :fingers-crossed: ]
In this case u need factory image of the stock rom. Unfortunately the factory image of the Android 6.0 for Android One isn't still available. But u can flash android 5.1 factory image.
With all the above code just add " fastboot flash bootloader bootloader.img "
I am providing the link of the factory image of android 5.1
https://drive.google.com/uc?id=0B6u4uzyz6jM3NWZNb2l4dkxDNzg
Soon I will be releasing a Android One flashing tool. Stay tuned.
Happy flashing.
 

stan1996

Member
Sep 23, 2015
11
0
0
Bricked your Android one?? Can't install or phone not getting detected by SP Flash tool? Don't worry. This is the common problem for many users including me. My phone was not getting detected by SP flash tool. I tried many ways so that my phone gets detected, but I failed. Then I read about the 'Fastboot' method and got success. Now I am sharing the whole method with you all.
At first you will need the Adb fastboot Programs only, Adb Driver, The device driver and the Stock ROM of android one.
Last but not the least, an android one with the bootloader unlocked.
Now you are ready lets begin with the procedure.
1) Extract the 'Adb fastboot Programs only' in a folder any where in the PC (Better make a folder in the desktop and extract there).
2) Install the drivers.
3) Extract the rom and then copy the 'system.img', 'userdata.img', 'boot.img', 'recovery.img' and 'cache.img' to the 'Adb fastboot Programs only' folder.
4) Now turn on the phone by pressing the volume up and the power button simultaneously, which will bring you to the bootloader menu. There go to the fastboot option by pressing the volume up button and selecting it by pressing the volume down button. This will activate fastboot mode. Now connect the phone with the PC via USB.
5) Open the 'Adb fastboot Programs only' folder. There press shift key and right click and select 'Open command window here' option. Command prompt will open. Now there follow these simple commands.
6) i)
Code:
fastboot flash system system.img
press enter. When it completes........
ii)
Code:
fastboot flash userdata userdata.img
press enter. When it completes........
iii)
Code:
fastboot flash boot boot.img
press enter. When it completes........
iv)
Code:
fastboot flash recovery recovery.img
press enter. When it completes........
v)
Code:
fastboot erase cache
press enter. When it completes........
vi)
Code:
fastboot flash cache cache.img
press enter. When it completes........
vii)
Code:
fastboot reboot
press enter.
7) Now you are done. Wait for at least 10 mins. as the initial boot takes time.
If there is any problem let me know.
If I helped you press the "Thanks' button. :D
its not working it is just showing the micromax s logo and nothing else i waited for 30 minutes

---------- Post added at 01:42 PM ---------- Previous post was at 01:37 PM ----------

In this case u need factory image of the stock rom. Unfortunately the factory image of the Android 6.0 for Android One isn't still available. But u can flash android 5.1 factory image.
With all the above code just add " fastboot flash bootloader bootloader.img "
I am providing the link of the factory image of android 5.1
https://drive.google.com/uc?id=0B6u4uzyz6jM3NWZNb2l4dkxDNzg
Soon I will be releasing a Android One flashing tool. Stay tuned.
Happy flashing.
where to use this zip file i hv dowloaded it plz help my phone is bricked
 

androidoverdoze

Senior Member
May 16, 2015
73
36
0
Bankura
its not working it is just showing the micromax s logo and nothing else i waited for 30 minutes

---------- Post added at 01:42 PM ---------- Previous post was at 01:37 PM ----------


where to use this zip file i hv dowloaded it plz help my phone is bricked
If I am not wrong your present rom is Android 6.
In this case you need to copy the bootloader.img too and add one more command
fastboot flash bootloader bootloader.img
Now it will boot.
I have released Android one flash tool. Download it from here http://forum.xda-developers.com/crossdevice-dev/android-one-general/android-one-flashtool-one-click-flash-t3339494/post65921661#post65921661
 
Last edited:

androidoverdoze

Senior Member
May 16, 2015
73
36
0
Bankura
Last edited:

androidoverdoze

Senior Member
May 16, 2015
73
36
0
Bankura

stan1996

Member
Sep 23, 2015
11
0
0
If I am not wrong your present rom is Android 6.
In this case you need to copy the bootloader.img too and add one more command
fastboot flash bootloader bootloader.img
Now it will boot.
I have released Android one flash tool. Download it from here http://forum.xda-developers.com/crossdevice-dev/android-one-general/android-one-flashtool-one-click-flash-t3339494/post65921661#post65921661
ihv downloaded your android one flash tool its very useful thanks

my phone is still not booting up
 

parthdz

Member
Feb 28, 2016
26
1
0
Help Guys....
Yesterday, I was flashing twrp recovery from android one toolkit.
Before I was using Philz touch recovery.
after Installing twrp, whenever I tried to boot my device it directed to recovery mode and the image of twrp stucks.
even If I open reccovery mode from an alternative way...it stucks in the twrp screen "teamwin".
Help guys how to get my phone back.
will the given method will work for it?
I yes, can I use AndroidOne Toolkit for using installing recovery again?

---------- Post added at 03:03 PM ---------- Previous post was at 03:00 PM ----------

Can I use this method on cm13 rom?