HOW TO -- Reset Binary Conter to 0

[m_adnan]

hi @all

follow instruction to reset the binary counter:

before you start, you need a actually gnote rom and you need usb jig!! if you not have a jig, dont try this!!!! im not responsible if you brick your phone!!

1. download a sgs2 bootloader(search in sgs2 forum --> bootloader)
2. flash it over odin as pda
3. put the battery out
4. put the battery in and connect the usb jig
5. connect your phone with pc
6. flash the rom via odin as pda
7. when is done, disconnect the phone from pc and remove the jig
8. put the battery out and again in
9. connect your phone whit the pc over the normal usb connector, flashed rom will start with the update, phone reboot self ---> finish

dont ask me, dont look for support, im not developer, i only wrote down what i do and how i reset the counter to 0..

many thanks at bodivas, hi was the first one who try this, and i can confirm it, it works..

 

[geek78]

with my jig i can't connect the note to the pc, just the jig. .. how is your jig? a picture or a link to buy it?

thanks

 

[m_adnan]

with my jig i can't connect the note to the pc, just the jig. .. how is your jig? a picture or a link to buy it?

thanks

here a link in ebay.. http://www.ebay.co.uk/itm/Samsung-i...aCables_JN&hash=item35b3d8fd9c#ht_1429wt_1139

but, if you put the jig in, the phone sould start whit download mode.. normally i do that whit sgs2, you can disconnect the jig and connect the phone whit the normal usb cable.. phone stay in download mode, and you can flash..

you can try it out before you flash the bootloader.. but i cant give you warranty for that..

 

[bodivas]

I have already rebuilt procedure 3 times and all ok..
Guide:
1. flash over Odin as Pda Bootloader_GS2.tar
2. put the battery out
3. put the battery in and connect the usb jig ( approximately 10 seconds)
4. connect your phone with pc and flash via Odin as Pda Bootloader_N7000.tar..
If your phone does not start, remove and reinsert the battery..

files for Odin:
Sbl.bin from SGS2:
View attachment Bootloader_GS2.rar
Sbl.bin from Note:
View attachment Bootloader_N7000.rar

Unpack these files,before flashing ..

 

[geek78]

I have already rebuilt procedure 3 times and all ok..
files for Odin:
Sbl.bin from SGS2:
http://www.multiupload.com/971QBMMTHX
Sbl.bin from Note:
http://www.multiupload.com/MQCAFDXURN

m_adnan,
add these files in your post..

yes, same for me

 

[bbdj69]

here a link in ebay.. http://www.ebay.co.uk/itm/Samsung-i...aCables_JN&hash=item35b3d8fd9c#ht_1429wt_1139

but, if you put the jig in, the phone sould start whit download mode.. normally i do that whit sgs2, you can disconnect the jig and connect the phone whit the normal usb cable.. phone stay in download mode, and you can flash..

you can try it out before you flash the bootloader.. but i cant give you warranty for that..

The auction has ended. Can you show a current one?

 

[anonymous572]

The cheapest jig in the world

 

[vinokirk]

The cheapest jig in the world

:O £1.03 delivered!
Thats ridiculous! Ive ordered one!
I wonder where it's shipped from and how much that costs?!

 

[RashaMatt]

How do you read the value of the counter?

In step 6, do you flash the original GNote sbl?

Step 7 is confusing - it says to remove the jig, but the jig was not in, because we were connected to the computer for Odin ???

 

[bodivas]

How do you read the value of the counter?

In step 6, do you flash the original GNote sbl?

Yes., and then you just restart the phone..Stop!!!

 

[ephestione]

DealExtreme is not the cheapest, just the one with best prices/spread relationship.
I paid my jig 0.80€ shipped off a random chinese seller on ebay

 

[chowdarygm]

did anyone else tried this? this thread seems to be eating dust!!! any problem with this mod?

 

[graemeg]

hmmmmm

LMAO, not so sure id be wanting to try these steps, i think ya need to spend less time worrying about the counters and more time enjoying ya phone, im sure a safer method will emerge in time.

 

[RashaMatt]

did anyone else tried this? this thread seems to be eating dust!!! any problem with this mod?

I tried and it didn't work for me, but I was not on JK4 to start (maybe that's required). Nothing bad happened though.

 

[stephen dagostino]

LMAO, not so sure id be wanting to try these steps, i think ya need to spend less time worrying about the counters and more time enjoying ya phone, im sure a safer method will emerge in time.

Yep, I ordered a jig yesterday but am coming to the same conclusion - I can live with my nice yellow triangle for now!

 

[arigosh]

I have already rebuilt procedure 3 times and all ok..
Guide:
1. flash over Odin as Pda sbl.bin from sgs2
2. put the battery out
3. put the battery in and connect the usb jig ( approximately 10 seconds)
4. connect your phone with pc and flash via Odin as Pda Sbl.bin from GNote..
If your phone does not start, remove and reinsert the battery..

files for Odin:
Sbl.bin from SGS2:

Sbl.bin from Note:

Any chance you can upload these files again?

 

[NullRef]

@arigosh: On Intratech thread you can find both the old and the new bootloader for S2

http://forum.xda-developers.com/showthread.php?t=1075278

 

[krishsastry]

I tried and posted the update on this Q&A before, it works on gNote and I have tried this twice.

Here's the link.

http://forum.xda-developers.com/showthread.php?t=1514002&highlight=remove+triangle

 

[bodivas]

Any chance you can upload these files again?

http://forum.xda-developers.com/showpost.php?p=19100010&postcount=4

 

[notegalaxy]

You could flash a rooted ics build. Then run triangleaway. Then reflash gingerbread from cwm. Thats what i did. Now have 0 again and no triangle

Sent from my GT-N7000 using XDA