Nice.. got my msl.. I changed a few things that I have changed on my TP2 and Evo4G like
Enabled USB charging
Slot cycle index to 1 ..delay between phone checking tower for incoming calls.. aka slightly quicker ring time..
ACCOLC to 2 ...priority on tower - set between 2-9 .. 2 is highest.. 1 is for emergency numbers
EVRC-B to enable ....all of the follwing are for supposed better voice quality... can't say I notice a difference..
Home Orig - EVRC-B
Roam Orig - EVRC-B
and..
HTTP Proxy Port to 0
HTTP Proxy Address to 0.0.0.0 .. 3g internet speed increase
Seems to be working great...
Original Post HERE By techwerkz
Many many thankx to him!!
If you want to thank me, thank him insted
This will give us something to do until we get root
I only updated some pics and minor information. Also made it a lil easier on the Evo 3D community
TO SPEED UP YOUR INTERNET... instructions from Avalaunchmods (Edited)
1. Get your MSL, by calling Sprint or by using CDMA workshop like i explain below
2. After you have your MSL go to your phone and type ##3282#
3. Click Edit Mode
4. Click Advanced
5. Scroll down to RTSP/HTTP Setting
6. Change RTSP proxy IP to 0.0.0.0 or You can leave this blank if you like
7. Change RTSP proxy Port to 0 (Zero)
8. HTTP proxy IP to 0.0.0.0 or You could leave this blank if you like
9. HTTP proxy port to 0 (Zero)
10.Go enjoy Downloads and a .20-.60 mbps increase in 3G speeds!
*********Original settings if you want to revert back.
Original settings
rtsp proxy ip: rtsp.vog.sprintpcs.com
rtsp proxy port: 554
http proxy ip: pd.vog.sprintpcs.com
http proxy port: 8085
TO GET YOUR MSL USING CDMA WORKSHOP
Please be very careful with CDMA Workshop. I am not responsible for your curiosity, or stupidity!""
The above post is such a big crap using so much stupidity to get MSL, just go to market , download MSL Reader (by ESCode) and you get it within seconds , you have to be rooted .:good:
Original Post HERE By techwerkz
Many many thankx to him!!
If you want to thank me, thank him insted
This will give us something to do until we get root
I only updated some pics and minor information. Also made it a lil easier on the Evo 3D community
TO SPEED UP YOUR INTERNET... instructions from Avalaunchmods (Edited)
1. Get your MSL, by calling Sprint or by using CDMA workshop like i explain below
2. After you have your MSL go to your phone and type ##3282#
3. Click Edit Mode
4. Click Advanced
5. Scroll down to RTSP/HTTP Setting
6. Change RTSP proxy IP to 0.0.0.0 or You can leave this blank if you like
7. Change RTSP proxy Port to 0 (Zero)
8. HTTP proxy IP to 0.0.0.0 or You could leave this blank if you like
9. HTTP proxy port to 0 (Zero)
10.Go enjoy Downloads and a .20-.60 mbps increase in 3G speeds!
*********Original settings if you want to revert back.
Original settings
rtsp proxy ip: rtsp.vog.sprintpcs.com
rtsp proxy port: 554
http proxy ip: pd.vog.sprintpcs.com
http proxy port: 8085
TO GET YOUR MSL USING CDMA WORKSHOP
Please be very careful with CDMA Workshop. I am not responsible for your curiosity, or stupidity!""
The above post is such a big crap using so much stupidity to get MSL, just go to market , download MSL Reader (by ESCode) and you get it within seconds , you have to be rooted .:good:
IF you took the time to read, the OP was on June 25 last year when root was not yet available for everybody.
Original Post HERE By techwerkz
Many many thankx to him!!
If you want to thank me, thank him insted
This will give us something to do until we get root
I only updated some pics and minor information. Also made it a lil easier on the Evo 3D community
TO SPEED UP YOUR INTERNET... instructions from Avalaunchmods (Edited)
1. Get your MSL, by calling Sprint or by using CDMA workshop like i explain below
2. After you have your MSL go to your phone and type ##3282#
3. Click Edit Mode
4. Click Advanced
5. Scroll down to RTSP/HTTP Setting
6. Change RTSP proxy IP to 0.0.0.0 or You can leave this blank if you like
7. Change RTSP proxy Port to 0 (Zero)
8. HTTP proxy IP to 0.0.0.0 or You could leave this blank if you like
9. HTTP proxy port to 0 (Zero)
10.Go enjoy Downloads and a .20-.60 mbps increase in 3G speeds!
*********Original settings if you want to revert back.
Original settings
rtsp proxy ip: rtsp.vog.sprintpcs.com
rtsp proxy port: 554
http proxy ip: pd.vog.sprintpcs.com
http proxy port: 8085
TO GET YOUR MSL USING CDMA WORKSHOP
Please be very careful with CDMA Workshop. I am not responsible for your curiosity, or stupidity!""
The above post is such a big crap using so much stupidity to get MSL, just go to market , download MSL Reader (by ESCode) and you get it within seconds , you have to be rooted .:good:
Nice, you corrected a method that was posted over a year ago. Good for you, buddy!
Thanks for this information!! When I go to "advanced" & "RTSP\HTTP settings" everything is already at zero's. Now, I cannot see the RTSP proxy I.P. or the HTTP proxy I.P., but the RTSP proxy port and the HTTP proxy port are both sitting at zero and I did not see what is posted for the original settings (rtsp.vog.sprintpcs.com). Anyone else, or is just me?
Thanks for this information!! When I go to "advanced" & "RTSP\HTTP settings" everything is already at zero's. Now, I cannot see the RTSP proxy I.P. or the HTTP proxy I.P., but the RTSP proxy port and the HTTP proxy port are both sitting at zero and I did not see what is posted for the original settings (rtsp.vog.sprintpcs.com). Anyone else, or is just me?
Perhaps a tweak script is already taking care of this for you? I haven't really noticed much benefit in this anyway... plus, mine keeps reverting back.
I called Sprint, they said no problem and asked why, I said to remove the proxies on the phone, and they gave it to me.
I think it's a good idea to mention in the OP that owners of Rooted phones can use MSL Reader (on Google Play)
Also, I just had my phone replaced due to screen problems, and it already had the settings in the OP, interestingly.
EASIEST WAY
DOWNLAOD REVSKILLS
1. load up revskills
2. goto Menu > hardware forensics > port utils > QC + AT -cmd
3. select your port of HTC
4.goto CODE
5. hit HTC : Unlock SPC
6. Hit Change SPC
your spc is now 000000