• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[How-To] Root Huawei Ascend P6 [4 methods]

Search This thread

lesscro

Senior Member
Jul 16, 2007
4,398
2,248
Paris
www.lesscro.com
Root-Huawei-Ascend-P6-eroot.jpg



Method 1
Using eRoot tool

Prerequisites
Install the driver for your mobile:
Ensure that the device is disconnected from your computer and run the file by following the instructions
Once the driver is installed, connect the mobile and let any additional installations make necessary job.
When installation is donefor driver, it is recommended that you restart your computer.
If you encounter the following problems in the recognition of mobile software with root, install the software Huawei Hi Suite 1.8.xx that will provide the necessary drivers.
Download file [www.netded.com] 华为 P6 ROOT 包.rar and unpack

Root mobile
Enable USB debugging.
To do this:
Go to Settings> About phone
Tap your build number until a secret menu appears
Enable debugging from the menu.
Connect your phone to your computer via USB
Down the notification bar and select as the connection mode to MTP mode
Launch ERoot.exe file after making sure that Hi-Suite is closed!
Wait a few seconds for the software to recognize device

300313ErootPhonandroid.jpg


Click "Root" and let it do the program! The transaction will be completed when the four steps have been completed.


Method 2
Using SRS One CLick Tool

Install the driver for your mobile:
Enable debug mode by going to Settings and selecting the menu about then tapping 5 times on the build number
Check the developer mode and enable debug mode
Connect your Huawei Ascend P6 to your PC via the supplied cable
In the notification bar select MTP mode
Launch the application SRS One Click Root
Click the Root Devices (All Methods) button
Let them do the application and follow the instructions
Huawei Ascend P6 Rooted !

srs-one-click-root.jpg



Method 3
Thx : Raimund1

Using Root Wizard




Step One: Install Driver
First you need to install USB drivers to your PC if you haven't done already. You can refer to this thread.

Step Two: Download Root Toolkit
ROOT Wizard V1.0.8 ( click to download )

Step Three: Get Root privileges
The phone connected to the computer, and turn on USB debugging mode

attachment.php
attachment.php



Method 4
Thx : Saurik

Using Impactor Master Key Hack


DOWNLOAD IMPACTOR
Save it to HDD.
Disable antivirus ( just to avoid headaches ) till finish.
Extract ZIP, Open Impactor.exe.
Choose: # drop SuperSU su to /system/xbin/su
Press Start and wait for a while.
Done - you have rooted P6


Method 5

Using Kingo : Root


DOWNLOAD Kingo Android Root for Windows (lastest build)
Save on Computer
Install
Follow instructions
Enjoy


KIT KAT users*
Method 6

Vroot
Thx : luckydude

Vroot is an one-key root tool designed by Mgyun-team. Just click one button, you can root your mobile device immediately!

It is very easy to use .Turn on the USB debugging mode, and connect your phone to the computer, then click the button "root" and now what you have to do is just waiting for the root result. Forget the complex and troublesome tutorials, everyone can control it easily.

DOWNLOAD Get Vroot (lastest build)
Save on Computer
Install
Follow instructions
Enjoy


Method 7

Root Genius
Thx : balahu

Root Genius
If you've been tired of your unsuitable Android phone. Root it, change it. And with Root Genius, all you need to do is connect your phone, then one click.

DOWNLOAD Get Root Genius (lastest build) // English version
Save on Computer
Install
Follow instructions
Enjoy

 
Last edited:

Ottomaani0

Senior Member
Feb 22, 2011
377
123
Nousiainen
I searched about P6 in some forums and some users seems to have problem rooting B107 firmware, wich it's not your case, anyways, i never saw a B103 (as you can see here )version of P6, it should be rootable

I had to do a factory reset to make root work on B107. After that it worked with no problems. Don't know if it will work for you though. :)

Sent from my HUAWEI P6-U06 using Tapatalk 4
 
  • Like
Reactions: TheMasterMindGT

TheMasterMindGT

Senior Member
Jul 12, 2012
291
102
Guatemala
I searched about P6 in some forums and some users seems to have problem rooting B107 firmware, wich it's not your case, anyways, i never saw a B103 (as you can see here )version of P6, it should be rootable
I hope that in the coming days aparesca some official method Ascend P6 because there are several comments and results across the various web. Thanks for your comment.

Solution: http://forum.xda-developers.com/showthread.php?p=44465941#post44465941
 
Last edited:

Raimund1

Member
Jun 6, 2011
16
19
Here is the Third Root-Method so called "ROOT Wizard"

icon.png
Homepage: http://www.sjroot.com/rootjl

Step One: Install Driver
First you need to install USB drivers to your PC if you haven't done already. You can refer to this thread.

Step Two: Download Root Toolkit
ROOT Wizard V1.0.8 ( click to download )

Step Three: Get Root privileges
The phone connected to the computer, and turn on USB debugging mode

genroot-1.jpg genroot-2.jpg
 

TheMasterMindGT

Senior Member
Jul 12, 2012
291
102
Guatemala
Here is the Third Root-Method so called "ROOT Wizard"

View attachment 2168977
Homepage: http://www.sjroot.com/rootjl

Step One: Install Driver
First you need to install USB drivers to your PC if you haven't done already. You can refer to this thread.

Step Two: Download Root Toolkit
ROOT Wizard V1.0.8 ( click to download )

Step Three: Get Root privileges
The phone connected to the computer, and turn on USB debugging mode

View attachment 2168978 View attachment 2168979

ROOT fails

Solution: http://forum.xda-developers.com/showthread.php?p=44465941#post44465941
 
Last edited:

S34Qu4K3

Senior Member
Jun 27, 2012
262
95
You tried Eroot method again with this build? It should work :/ i just did it, update+root with no problems

Sent from my HUAWEI P6-U06 using xda app-developers app
 

lesscro

Senior Member
Jul 16, 2007
4,398
2,248
Paris
www.lesscro.com
Do you have some speicifc app already installed ? if you can made a backup, with non root, i think you can't save Apps+Data (Go Backup) then Titanium backup can make job similar...

Factory reset and start from beginning... If you have time...
 
  • Like
Reactions: TheMasterMindGT

S34Qu4K3

Senior Member
Jun 27, 2012
262
95
Just to ensure, are you connecting your P6 in MTP mode? And adb drivers are installed?
Try to remover all P6 drivers, after, connect your phone and select HI Suite mode, wait until drivers instalation, then connect in MTP and try
 

Top Liked Posts

  • There are no posts matching your filters.
  • 42
    Root-Huawei-Ascend-P6-eroot.jpg



    Method 1
    Using eRoot tool

    Prerequisites
    Install the driver for your mobile:
    Ensure that the device is disconnected from your computer and run the file by following the instructions
    Once the driver is installed, connect the mobile and let any additional installations make necessary job.
    When installation is donefor driver, it is recommended that you restart your computer.
    If you encounter the following problems in the recognition of mobile software with root, install the software Huawei Hi Suite 1.8.xx that will provide the necessary drivers.
    Download file [www.netded.com] 华为 P6 ROOT 包.rar and unpack

    Root mobile
    Enable USB debugging.
    To do this:
    Go to Settings> About phone
    Tap your build number until a secret menu appears
    Enable debugging from the menu.
    Connect your phone to your computer via USB
    Down the notification bar and select as the connection mode to MTP mode
    Launch ERoot.exe file after making sure that Hi-Suite is closed!
    Wait a few seconds for the software to recognize device

    300313ErootPhonandroid.jpg


    Click "Root" and let it do the program! The transaction will be completed when the four steps have been completed.


    Method 2
    Using SRS One CLick Tool

    Install the driver for your mobile:
    Enable debug mode by going to Settings and selecting the menu about then tapping 5 times on the build number
    Check the developer mode and enable debug mode
    Connect your Huawei Ascend P6 to your PC via the supplied cable
    In the notification bar select MTP mode
    Launch the application SRS One Click Root
    Click the Root Devices (All Methods) button
    Let them do the application and follow the instructions
    Huawei Ascend P6 Rooted !

    srs-one-click-root.jpg



    Method 3
    Thx : Raimund1

    Using Root Wizard




    Step One: Install Driver
    First you need to install USB drivers to your PC if you haven't done already. You can refer to this thread.

    Step Two: Download Root Toolkit
    ROOT Wizard V1.0.8 ( click to download )

    Step Three: Get Root privileges
    The phone connected to the computer, and turn on USB debugging mode

    attachment.php
    attachment.php



    Method 4
    Thx : Saurik

    Using Impactor Master Key Hack


    DOWNLOAD IMPACTOR
    Save it to HDD.
    Disable antivirus ( just to avoid headaches ) till finish.
    Extract ZIP, Open Impactor.exe.
    Choose: # drop SuperSU su to /system/xbin/su
    Press Start and wait for a while.
    Done - you have rooted P6


    Method 5

    Using Kingo : Root


    DOWNLOAD Kingo Android Root for Windows (lastest build)
    Save on Computer
    Install
    Follow instructions
    Enjoy


    KIT KAT users*
    Method 6

    Vroot
    Thx : luckydude

    Vroot is an one-key root tool designed by Mgyun-team. Just click one button, you can root your mobile device immediately!

    It is very easy to use .Turn on the USB debugging mode, and connect your phone to the computer, then click the button "root" and now what you have to do is just waiting for the root result. Forget the complex and troublesome tutorials, everyone can control it easily.

    DOWNLOAD Get Vroot (lastest build)
    Save on Computer
    Install
    Follow instructions
    Enjoy


    Method 7

    Root Genius
    Thx : balahu

    Root Genius
    If you've been tired of your unsuitable Android phone. Root it, change it. And with Root Genius, all you need to do is connect your phone, then one click.

    DOWNLOAD Get Root Genius (lastest build) // English version
    Save on Computer
    Install
    Follow instructions
    Enjoy

    6
    Here is the Third Root-Method so called "ROOT Wizard"

    icon.png
    Homepage: http://www.sjroot.com/rootjl

    Step One: Install Driver
    First you need to install USB drivers to your PC if you haven't done already. You can refer to this thread.

    Step Two: Download Root Toolkit
    ROOT Wizard V1.0.8 ( click to download )

    Step Three: Get Root privileges
    The phone connected to the computer, and turn on USB debugging mode

    genroot-1.jpg genroot-2.jpg
    3
    Hi, i have faced same issue every time when i root my Huawei P6. That how i kept root when installing SuperSU was i opened supersu->update binaries it like freeze in that part. When it wont response anything i deleted supersu app and downloaded it again, when i opened it it asks update binaries and somehow it starts update and it works. Dont reboot when you delete supersu, just download it again. I hope this works with you.

    Sent from my SM-T310 using XDA Premium 4 mobile app
    When it gets stuck installing the su binary, just press the home button, close the app in Recent apps, then open it again and install the su binary. That worked for me, and no need to reboot or reinstall the app. [emoji2]

    Sent from my Huawei P6