How to root LP 5.1.1 with New system-less SuperSU 2.6.X

[buhohitr]

Hi all,
I just finished testing the new method of rooting using new SuperSU system-less and it's working well on my P600. I don't have other device to test it on, but if you guys could test it out on your device and report back, that would be nice.
Here how to root using new SuperSU system-less app:
Prep:
1) Download Odin 3.09 http://odindownload.com/Samsung-Odin/#.Vm3AglE1I-Q
2) Download SuperSu version 2.6.2 to your SDcard here http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
3) Download TWRP 2.8.7.0 tar file to your PC here https://dl.twrp.me/lt03wifiue/ (you must use Spen to navigate, touch won't work)
For P605 - Please use twrp-2.8.7.0-lt03ltexx-4.4.img.tar version here https://dl.twrp.me/lt03ltexx/
4) Download the full stock 5.1.1 firmware by download this tool to your PC from here http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Then use the tool to download 5.1.1 rom (very fast download). set model=sm-p600, region=XAR, put a check in "Auto" and "Decrypte automatically"
Execcution:
1) Use Odin to flash full factory rom 5.1.1 to your device with "Auto Reboot" checked. If you already using 5.1.1 with root, you can just flash over your current one. Your data will be preserved. It's not nessessary to flash the full firmware but it's easier and less confuse. Once completed your device will reboot. Now boot back to download mode.
2) Use Odin to flash TWRP 2.8.7.0 with "Auto Reboot" UNchecked. Once completed. Hold Vol up+Home+power buttons to boot to TWRP recovery(do not let your device boot up). It will take a while so just wait. You also will see a red message warning about SEdroid security..blah blah...just ignore it. If you want TWRP touch, you can flash this version zip (can't flash through ODIN) before proceed. https://s.basketbuild.com/devs/Joshndroid/TWRP/lt03wifi
3) Once in TWRP, flash the SuperSU 2.6.1 system-less. Becareful here, after hit REBOOT, If TWRP offered to root, DO NOT DO IT (You will bootloop if you miss this step). Hit on "do not install". Your device will reboot. Done!! This SuperSU will patch your kernel and install root. Once completed boot up and enjoy. Your system is now rooted with TWRP installed. Pretty nice!!
EDIT: You also need to disable "Security change" pop up by remove or use Titanium to disable "Security policy updates" and "SecurityLogAgent". I heard report that if you don't your device may bootloop later on.

 

[mosimchah]

@joshndroid made his own version of twrp 2.8.7 which has full touch support/recognition (not just the s-pen). Here is the link:
https://s.basketbuild.com/devs/Joshndroid/TWRP/lt03wifi Maybe could you put this version in the OP as another option instead of the official twrp?

 

[amey2606]

Guys, a question. Can i use the exynos version of TWRP, ie- lt03wifiue, on my SM-P601, which is also the exynos one, but with 3G support.?

Thanks.

 

[buhohitr]

@joshndroid made his own version of twrp 2.8.7 which has full touch support/recognition (not just the s-pen). Here is the link:
https://s.basketbuild.com/devs/Joshndroid/TWRP/lt03wifi Maybe could you put this version in the OP as another option instead of the official twrp?

I don't think he made one for Odin.

Sent from my SM-P600 using Tapatalk

 

[buhohitr]

Guys, a question. Can i use the exynos version of TWRP, ie- lt03wifiue, on my SM-P601, which is also the exynos one, but with 3G support.?

Thanks.

Yes

Sent from my SM-P600 using Tapatalk

 

[mosimchah]

I don't think he made one for Odin.

Sent from my SM-P600 using Tapatalk

Good point, I didn't notice that, however we could flash the official twrp with odin, and then we could flash joshndroid's twrp from the official twrp. So could you add that to the op?

 

[buhohitr]

Good point, I didn't notice that, however we could flash the official twrp with odin, and then we could flash joshndroid's twrp from the official twrp. So could you add that to the op?

Added to OP. Thanks

 

[murigny64]

Ok

Root is present (supersu) seem to work but, don't work with some apps

 

[buhohitr]

Ok

Root is present (supersu) seem to work but, don't work with some apps

Give me a few so I can test them out

 

[Ozark_8125]

Ok

Root is present (supersu) seem to work but, don't work with some apps

Did you install supersu from the playstore and did it ask to update binaries? I can't remember when I did mine if it asked or not. I don't have any su issues with mine.

 

[murigny64]

Flash firm doj3 with odin
Reboot in bootloader
Flash twrp with odin
Reboot in twrp
Flash supersu 2.61
Reboot.
Kernel seem to be patched (red warning message), Supersu app is present with no binarie update needed.
Reboot in twrp and Flash xposed wanam mod

Result:
Titanium Backup: ok
Rebooter app: nok

Freeze after 2 mins: have to hard reboot, again and again.

So, I flash again with odin and use the old method (boot patched)

 

[tahrang]

how do i uninstall twrp?

 

[mosimchah]

how do i uninstall twrp?

Flash a different recovery, either with twrp or odin. Why do you want to remove twrp?

 

[tahrang]

Done and completed

twrp not working correctly, it did previously, but after the update, it doesn't.

---------- Post added at 09:40 PM ---------- Previous post was at 09:15 PM ----------

Hi all,
I just finished testing the new method of rooting using new SuperSU system-less and it's working well on my P600. I don't have other device to test it on, but if you guys could test it out on your device and report back, that would be nice.
Here how to root using new SuperSU system-less app:
Prep:
1) Download SuperSu version 2.6.1 to your SDcard here http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
2) Download TWRP 2.8.7.0 tar file to your PC here https://dl.twrp.me/lt03wifiue/ (you must use Spen to navigate, touch won't work)
3) Download the full stock 5.1.1 firmware by download this tool to your PC from here http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Then use the tool to download 5.1.1 rom (very fast download). set model=sm-p600, region=XAR, put a check in "Auto" and "Decrypte automatically"
Execcution:
1) Use Odin to flash full factory rom 5.1.1 to your device with "Auto Reboot" checked. If you already using 5.1.1 with root, you can just flash over your current one. Your data will be preserved. It's not nessessary to flash the full firmware but it's easier and less confuse. Once completed your device will reboot. Now boot back to download mode.
2) Use Odin to flash TWRP 2.8.7.0. Once completed. Hold Vol up+Home+power buttons to boot to TWRP recovery(do not let your device boot up). It will take a while so just wait. You also will see a red message warning about SEdroid security..blah blah...just ignore it. If you want TWRP touch, you can flash this version zip (can't flash through ODIN) before proceed. https://s.basketbuild.com/devs/Joshndroid/TWRP/lt03wifi
3) Once in TWRP, flash the SuperSU 2.6.1 system-less. Becareful here, If TWRP offered to root, DO NOT DO IT. This SuperSU will patch your kernel and install root. Once completed boot up and enjoy. Your system is now rooted with TWRP installed. Pretty nice!!

HELP!
yes I'm screaming, sorry.
I followed these instructions, and now my note is stuck in loop - starts with samsung galaxy note 10.1 2014 logo, goes to samsung logo and restarts.
Please, please help
thanks

Now it is stuck on samsung logo, and doesnot go any further.

Ok, now I'm starting the whole thing again. hopefully, this will go better

third time is the charm! succeeded.

 

[vuurvlinder]

What do i do when i already have the spanish firmware? Do i need to flash it again with the 5.1.1 code XAR? Or can i flash TWRP with Odin now.?

 

[tahrang]

What do i do when i already have the spanish firmware? Do i need to flash it again with the 5.1.1 code XAR? Or can i flash TWRP with Odin now.?

I flashed the xar update, even though i already had the spanish one, plus i was rooted. then i flashed twrp and supersu like in the post above.
thanks

---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------

Flash firm doj3 with odin
Reboot in bootloader
Flash twrp with odin
Reboot in twrp
Flash supersu 2.61
Reboot.
Kernel seem to be patched (red warning message), Supersu app is present with no binarie update needed.
Reboot in twrp and Flash xposed wanam mod

Result:
Titanium Backup: ok
Rebooter app: nok

Freeze after 2 mins: have to hard reboot, again and again.

So, I flash again with odin and use the old method (boot patched)

did you get the wanam again after the old method? if so, please tell me how.
thanks

 

[Michael in ATL]

Hmm - I've Odin'd the new XAR v.5.1.1 just fine, but when I try to Odin TWRP 2.8.7/6/3, they all fail in Odin 3.09. I've tried multiple times with same result. Any suggestions?

 

[buhohitr]

Hmm - I've Odin'd the new XAR v.5.1.1 just fine, but when I try to Odin TWRP 2.8.7/6/3, they all fail in Odin 3.09. I've tried multiple times with same result. Any suggestions?

Did you boot up after Odin XAR 5.1.1? boot up then boot down to Odin download mode and try again.

 

[Michael in ATL]

Not able to Odin TWRP

Did you boot up after Odin XAR 5.1.1? boot up then boot down to Odin download mode and try again.

I sure did, and should've been clearer. I'm running 5.1.1 XAR that I Odin'd yesterday. USB debugging is enabled, and Odin tries/fails when trying to load up to 4 versions of TWRP that I've tried. Further, I get corrupted firmware after it tries, and have to reinstall v5.1.1 (if that tells those much smarter than I anything)

 

[buhohitr]

I sure did, and should've been clearer. I'm running 5.1.1 XAR that I Odin'd yesterday. USB debugging is enabled, and Odin tries/fails when trying to load up to 4 versions of TWRP that I've tried. Further, I get corrupted firmware after it tries, and have to reinstall v5.1.1 (if that tells those much smarter than I anything)

Can you try to boot int recovery to see if you can access stock recovery? Possible you need to do format storage?