How to root on stock 7.1.1 using Magisk

[auxillium]

So I installed TWRP recovery using tuliptool and all that, but didn't bother with bootloader unlocking since it said it's not needed. So I tried to install Magisk using the instructions on their thread but after booting it asks me to reset my phone because the data got corrupted.

Luckily I had backed everything up beforehand, so I restored boot image and everything works fine again. Just wanted to know what I did wrong here. Did I miss any steps?

 

[marvelljones]

So I installed TWRP recovery using tuliptool and all that, but didn't bother with bootloader unlocking since it said it's not needed. So I tried to install Magisk using the instructions on their thread but after booting it asks me to reset my phone because the data got corrupted.

Luckily I had backed everything up beforehand, so I restored boot image and everything works fine again. Just wanted to know what I did wrong here. Did I miss any steps?

You probably didn't miss anything if it's the "Your device is corrupt. It can’t be trusted and may not work properly” error, I get the same thing. You messed with the files in the boot partition so ZTE's "safety" features in the stock ROM automatically call them corrupted. I simply hit the power button and continue to boot, my device works fine (actually much better than before being rooted with Magisk). I'm the one who "corrupted" the phone on purpose, so I'm comfortable it's fine. If you're getting another message, I'm not entirely sure why. Maybe try ADB sideloading Magisk in TWRP, it's what "worked" for me.

 

[auxillium]

You probably didn't miss anything if it's the "Your device is corrupt. It can’t be trusted and may not work properly” error, I get the same thing. You messed with the files in the boot partition so ZTE's "safety" features in the stock ROM automatically call them corrupted. I simply hit the power button and continue to boot, my device works fine (actually much better than before being rooted with Magisk). I'm the one who "corrupted" the phone on purpose, so I'm comfortable it's fine. If you're getting another message, I'm not entirely sure why. Maybe try ADB sideloading Magisk in TWRP, it's what "worked" for me.

What do you mean by "hitting the power button and continue to boot"? When I hit the power button on the "Decryption unsuccessful" screen it just locks and unlocks like normal, but stays there.

 

[auxillium]

Ok I managed to install Magisk after factory reset, but after that my sdcard is not being recognized anymore (but is recognizable in TWRP). So I decided to restore the backup i had, and rebooted. But now I'm stuck on the ZTE logo during boot. I can still open TWRP, though. I've tried wiping system, data, and cache, then restoring the backup, also no good. For now I'm downloading the stock firmware and will try that. Any ideas on how I can fix this before I flash the stock firmware?

EDIT: Ok I managed to fix it by installing the no verity boot image instead. Boots again. I'll probably refrain from trying to root for now. Thanks for the help.

 

[marvelljones]

Ok I managed to install Magisk after factory reset, but after that my sdcard is not being recognized anymore (but is recognizable in TWRP). So I decided to restore the backup i had, and rebooted. But now I'm stuck on the ZTE logo during boot. I can still open TWRP, though. I've tried wiping system, data, and cache, then restoring the backup, also no good. For now I'm downloading the stock firmware and will try that. Any ideas on how I can fix this before I flash the stock firmware?

EDIT: Ok I managed to fix it by installing the no verity boot image instead. Boots again. I'll probably refrain from trying to root for now. Thanks for the help.

Well, I wasn't much help, but it sounds like your overall problem was different than mine. My only advice is if you attempt to root with Magisk again, is to connect to your PC/Mac/etc with a cable, use the Advanced menu in TWRP, choose ADB sideload, and sideload Magisk from your PC/Mac/etc. You can find a more advanced explanations on various websites how to use ADB if you don't already know how. For some reason that worked for me and gave me full Magisk and phone functionality when nothing else did.

 

[auxillium]

Well, I wasn't much help, but it sounds like your overall problem was different than mine. My only advice is if you attempt to root with Magisk again, is to connect to your PC/Mac/etc with a cable, use the Advanced menu in TWRP, choose ADB sideload, and sideload Magisk from your PC/Mac/etc. You can find a more advanced explanations on various websites how to use ADB if you don't already know how. For some reason that worked for me and gave me full Magisk and phone functionality when nothing else did.

Will this allow me to install magisk without a factory reset?

 

[marvelljones]

Will this allow me to install magisk without a factory reset?

I didn't have to, but I can't guarantee it will work for you. I had previously factory reset my phone but at the time I sideloaded Magisk I had been using the phone for at least a week. Just make a backup of everything first to be safe. *edit* I am using the beta version of Magisk (16.4), not sure if that's making a difference.