[HOW TO] Samsung Galaxy S I9070 Advance ROOT for most firmwares!

Status
Not open for further replies.
Search This thread

qzem

Senior Member
Jun 23, 2010
1,594
1,030
Ok after a 2-3 weeks of pain and miserably, I have managed to compile a kernel which give us permanent root for Samsung Galaxy S Advance. There is a little problem with this method. Cause I am a total beginner in developing, my kernel has side affects. It makes phone reboots for no reason, I think there is some problem with drivers. Don't worry I have found a workaround. First you must flash my kernel to get root access, that just flash original kernel back, and the root access is still there, and the reboots are gone. Now you know why it is called ugly method :D. When I'll have time I will try to provide 100% working kernel.

FIRST THIS WAS MADE FOR PHONES WITH XXLD1 firmware (european) , but with help of testers now this method also works on ZSDL1, VJLD1 DXLD1, DDLD4, JPLD3, ZSLE4, XXLD2 and XXLE2 firmware, I have add kernels for this firmwares (Step 10, of rooting proces)! You are free to test it on other firmwares, just make sure you have original firmware ready if something goes wrong

SECOND I AM NOT RESPONSIBLE IF THIS WILL BRICK YOUR PHONE!
Under normal circumstances it won't. If something goes wrong you can still flash original firmware with odin.

THIRD this can only be done in Windows.

Now the procedure :)


1. Download GT-I9070-root.rar, and extract it somewhere on you local disk.

2. From stuff you just extracted run program Odin3 v1.83.exe

3. Then open Settings in your phone, go to Aplications -> Development and check USB Debugging and Allow mock locations. Both needs to be Checked (Selected).

4. Turn off phone and turn it back on into Download mode, like this press Volume Down + Home button + Power button, wait untill some "strange" screen appers, put in usb cable and choose continue.

5. Now wait until Odin recognize your phone. It can take a while first time, if you have problems search for samsung drivers on the internet,

6. Under PIT file browse for GT-I9070_EUR_XX_8G_20111220_KL6.pit, you have extracted this file before.

7. Under PDA choos rootkernel.tar.md5.

8. Then check what options are checked (Selected), be sure to UNCHECK (remove selction) Re-Partition, Flash Lock, Phone EFS Clear, Phone Bootloader Update! Only Auto Reboot and F.Reset Time should be checked (Selected)

9. When this is set just press Start and wait for phone to reboot.

10. Now repeat steps from 4 to 9, with one exception at step 7 now choose xxld1.tar.md5. For other firmwares you can download appropriate kernels here:
ZSLD1.tar.md5 (removed)
VJLD1.tar.md5. (removed
DXLD1.tar.md5 (removed)
DDLD4.tar.md5
JPLD3.tar.md5
ZSLE4.tar.md5[
XXLD2.tar.md5
XXLE2.tar.md5
BULE2.tar.md5
DDLI1.tar.md5
DXLD2.tar.md5
PXXLD2.tar.md5
UBLD1.tar.md5
PXXLE1.tar.md5
DDLI1.tar.md5

I am very sorry to inform you but since i only have free account on mediafire, some of my files where removed by their administrators due to too many downloads :(. If some body could gather all the files and provide alternative link (but not dropbox, cause they have limited downloads as well, as far as I know).

11. Download and install Superuser or SuperSU aplication from market and enjoy the rooted phone! And you must also download Busybox to install busyboxbinary. [Recommended way]
Or you can use Superoneclick, this tools push the Superuser aplication to /system/app and it installs busybox binary. Just search this tools on XDA.



Voila your phone should now be rooted. I will do my best to improve this method.

This wouldn't happened without a help of this people (THANK YOU GUYS!):

xanonus
kilsmap
mb-14
interloop
sknight13602
lownoise

Your information were priceless!!

I hope I didn't miss someone, if I did, I apologize, I will add you, just tell me :)!

FINAL WARNING: when rooting phone you are voiding warranty, so think twice if you are ready for this :).
 
Last edited by a moderator:

qzem

Senior Member
Jun 23, 2010
1,594
1,030
For restoring your phone to the original firmware, go HERE to download your country or region specific firmware. Register and search for I9070 under firmware. Than you can flash this firmware with Odin just like the kernel, you choose PIT file (the same file that is used for kernel flashing) and you put original firmware under PDA section, re-partition must NOT be selected!

There are a reports from user BaBaCaNA and three other users, that this method works on the Brazilian phone with kernel VJLD1. I would love to here from other user, if they are willing to test this on other firmwares, which are not european. And report here if they have succeed.

Ok I have add additional kernels ZSLD1, VJLD1, DXLD1, DDLD4, JPLD3, ZSLE4, BULE2 and DDLI1. Check Step 10 in the first post.

Thanks to gpy0000000, RSDamasceno, jheiimarkova, sky881, activatedgeek, hmorcos, titus1, c128, shut_down for sending me original kernels, I've just repacked them into flashable tar.

Special thanks for donating goes to:

  • m_loaiza
  • Risuke
  • igorvelho4
  • Stefano P.
  • Fernando Yukelson
  • Max Shepley

READ THIS!!!

Ok cause I don't follow this thread often, here is one more time the procedure for rooting any firmware. You can find the correct firmware on sammobile.com. Download it, and extract it twice to get the kernel.bin.md5. Than download an install Cygwin, if you are using windows, to get shell commands. If you have linux you don't need it. Than copy kernel.bin.md5 in you cygwin home folder (you've set this folder during installation). Now run Cygwin and enter thos commands:

Code:
tar cvf theNameOfKernel.tar kernel.bin.md5
 md5sum -t theNameOfKernel.tar >> theNameOfKernel.tar
 mv theNameOfKernel.tar theNameOfKernel.tar.md5

You use this repacked kernel in second phase of flashing, when you repeat the steps. That's it!

If you don't understand this procedure, please use google or some other search engine to get the answers you need. If you still don't know what you are doing, ask in the thread, I am sure someone will answer your question.

Please don't PM me for every little thing!
 
Last edited:

foxity

Senior Member
Sep 27, 2010
54
11
São Paulo
My kernel is VJLD1, I would like to know if I have a way to make a backup of it, then do this procedure I re-flash it in place.

It has to do this?
 

qzem

Senior Member
Jun 23, 2010
1,594
1,030
Thats strange indeed,I hope I didn't messed up files cause I had like 5 testing kernels:/. Please try again if it won't work I will reupload correct kernel but not until monday. I am very sorry for that:(.

EDIT: Can anyone alse confirm if MD5Hash is invalid?

Sent from my GT-I9070 using XDA
 
Last edited:

weeguy

New member
Apr 7, 2008
3
2
<ID:0/032> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> kernel2.tar.md5 is invalid.
<OSM> End...
 

qzem

Senior Member
Jun 23, 2010
1,594
1,030
Ok guys I apologize! I will upload new file on monday when I get to my work computer. Hang on:)!

Sent from my GT-I9070 using XDA
 

qzem

Senior Member
Jun 23, 2010
1,594
1,030
I am back :)! I have re-upload freshly signed kernels. Please read the instructions again and try them, then let me know how it went. For all of you who doest have XXLD1 version of kernel, you can download your version of firmware on sammobile.com, and unpack it (you have to do it twice to get to internal files). Than you can send me those files trough link, or via email (for this you should write me a PM), and I will do you signd kernel so that you could also root your phone. But I will requier from you to test it before I release it to others.

Have a nice day :)
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 145
    Ok after a 2-3 weeks of pain and miserably, I have managed to compile a kernel which give us permanent root for Samsung Galaxy S Advance. There is a little problem with this method. Cause I am a total beginner in developing, my kernel has side affects. It makes phone reboots for no reason, I think there is some problem with drivers. Don't worry I have found a workaround. First you must flash my kernel to get root access, that just flash original kernel back, and the root access is still there, and the reboots are gone. Now you know why it is called ugly method :D. When I'll have time I will try to provide 100% working kernel.

    FIRST THIS WAS MADE FOR PHONES WITH XXLD1 firmware (european) , but with help of testers now this method also works on ZSDL1, VJLD1 DXLD1, DDLD4, JPLD3, ZSLE4, XXLD2 and XXLE2 firmware, I have add kernels for this firmwares (Step 10, of rooting proces)! You are free to test it on other firmwares, just make sure you have original firmware ready if something goes wrong

    SECOND I AM NOT RESPONSIBLE IF THIS WILL BRICK YOUR PHONE!
    Under normal circumstances it won't. If something goes wrong you can still flash original firmware with odin.

    THIRD this can only be done in Windows.

    Now the procedure :)


    1. Download GT-I9070-root.rar, and extract it somewhere on you local disk.

    2. From stuff you just extracted run program Odin3 v1.83.exe

    3. Then open Settings in your phone, go to Aplications -> Development and check USB Debugging and Allow mock locations. Both needs to be Checked (Selected).

    4. Turn off phone and turn it back on into Download mode, like this press Volume Down + Home button + Power button, wait untill some "strange" screen appers, put in usb cable and choose continue.

    5. Now wait until Odin recognize your phone. It can take a while first time, if you have problems search for samsung drivers on the internet,

    6. Under PIT file browse for GT-I9070_EUR_XX_8G_20111220_KL6.pit, you have extracted this file before.

    7. Under PDA choos rootkernel.tar.md5.

    8. Then check what options are checked (Selected), be sure to UNCHECK (remove selction) Re-Partition, Flash Lock, Phone EFS Clear, Phone Bootloader Update! Only Auto Reboot and F.Reset Time should be checked (Selected)

    9. When this is set just press Start and wait for phone to reboot.

    10. Now repeat steps from 4 to 9, with one exception at step 7 now choose xxld1.tar.md5. For other firmwares you can download appropriate kernels here:
    ZSLD1.tar.md5 (removed)
    VJLD1.tar.md5. (removed
    DXLD1.tar.md5 (removed)
    DDLD4.tar.md5
    JPLD3.tar.md5
    ZSLE4.tar.md5[
    XXLD2.tar.md5
    XXLE2.tar.md5
    BULE2.tar.md5
    DDLI1.tar.md5
    DXLD2.tar.md5
    PXXLD2.tar.md5
    UBLD1.tar.md5
    PXXLE1.tar.md5
    DDLI1.tar.md5

    I am very sorry to inform you but since i only have free account on mediafire, some of my files where removed by their administrators due to too many downloads :(. If some body could gather all the files and provide alternative link (but not dropbox, cause they have limited downloads as well, as far as I know).

    11. Download and install Superuser or SuperSU aplication from market and enjoy the rooted phone! And you must also download Busybox to install busyboxbinary. [Recommended way]
    Or you can use Superoneclick, this tools push the Superuser aplication to /system/app and it installs busybox binary. Just search this tools on XDA.



    Voila your phone should now be rooted. I will do my best to improve this method.

    This wouldn't happened without a help of this people (THANK YOU GUYS!):

    xanonus
    kilsmap
    mb-14
    interloop
    sknight13602
    lownoise

    Your information were priceless!!

    I hope I didn't miss someone, if I did, I apologize, I will add you, just tell me :)!

    FINAL WARNING: when rooting phone you are voiding warranty, so think twice if you are ready for this :).
    30
    For restoring your phone to the original firmware, go HERE to download your country or region specific firmware. Register and search for I9070 under firmware. Than you can flash this firmware with Odin just like the kernel, you choose PIT file (the same file that is used for kernel flashing) and you put original firmware under PDA section, re-partition must NOT be selected!

    There are a reports from user BaBaCaNA and three other users, that this method works on the Brazilian phone with kernel VJLD1. I would love to here from other user, if they are willing to test this on other firmwares, which are not european. And report here if they have succeed.

    Ok I have add additional kernels ZSLD1, VJLD1, DXLD1, DDLD4, JPLD3, ZSLE4, BULE2 and DDLI1. Check Step 10 in the first post.

    Thanks to gpy0000000, RSDamasceno, jheiimarkova, sky881, activatedgeek, hmorcos, titus1, c128, shut_down for sending me original kernels, I've just repacked them into flashable tar.

    Special thanks for donating goes to:

    • m_loaiza
    • Risuke
    • igorvelho4
    • Stefano P.
    • Fernando Yukelson
    • Max Shepley

    READ THIS!!!

    Ok cause I don't follow this thread often, here is one more time the procedure for rooting any firmware. You can find the correct firmware on sammobile.com. Download it, and extract it twice to get the kernel.bin.md5. Than download an install Cygwin, if you are using windows, to get shell commands. If you have linux you don't need it. Than copy kernel.bin.md5 in you cygwin home folder (you've set this folder during installation). Now run Cygwin and enter thos commands:

    Code:
    tar cvf theNameOfKernel.tar kernel.bin.md5
     md5sum -t theNameOfKernel.tar >> theNameOfKernel.tar
     mv theNameOfKernel.tar theNameOfKernel.tar.md5

    You use this repacked kernel in second phase of flashing, when you repeat the steps. That's it!

    If you don't understand this procedure, please use google or some other search engine to get the answers you need. If you still don't know what you are doing, ask in the thread, I am sure someone will answer your question.

    Please don't PM me for every little thing!
    7
    Hello!

    I don't have much time at the moment, so I've deceided to write a little guide on how to repack original kernel by yourself. You need to install Cygwin on your pc. This is a linux command prompt for windows. If you have linux installed, than this can be done in terminal. Then you have to copy kernel.bin.md5 into cygwin home direcotry (this diretory is created during install process). After that there are only three steps to do, to repack it. Run Cygwin and write this:

    tar -cvf XXLD3.tar kernel.bin.md5
    md5sum -t XXLD3.tar >> XXLD3.tar
    mv XXLD3.tar XXLD3.tar.md5

    That is it, you can now use your repacked kernel in my rooting process, at step 10.

    Good luck!
    7
    Hey guys I am sorry to inform you, but I couldn't get my phone repaired, and this phone is not sold in my country (I got the first one from my friend, but it was the last one he could provide), so I've bought new phone HTC One S, and I will most probably start to work on this phone since it lacks support too ( there are to versions of this phone, and of course I got the one that lacks developrs support :rolleyes:). I hope someone else will continue to work on Galaxy S Advance, I think you guys deserve to have custom roms and other cool stuff for this baby :)!

    Good luck, and thank you all for the support!
    7
    Donate button added!

    Hello!

    Tommorow I will add a ZSLE4 firmware root support. I hope everything will work!

    Just for the info, I have finally add a donate button (it is above my avatar picture), so if anyone wishes to support my work by donating something little you are very welcome :). Maybe if I gather enaugh donations I could finally buy me a new Advance, and continue to develope on this phone. Since my first one is totally bricked, and I didn't have warranty. But even a click on thanks button is enaugh for me!

    Thanks for your support!

    XDA rulz! :D