• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[HOW-TO] The Nexus 6 All-In-One Beginner's Guide

Search This thread

xBeerdroiDx

Senior Member
Nov 10, 2012
2,356
1,744
Fort Worth
2d1of9s.jpg


Welcome to the Nexus 6 All-In-One Guide. If you are a new user that is looking for the opportunity to take advantage of your device and do it right the first time, this guide is here to point the way. This thread exists to keep all the necessary methods and material in one common place just for you. As always: Do your homework first.

If followed correctly, this guide can be a useful tool. These steps are listed in the order in which they should be completed. The intent is to seamlessly unlock, root, backup and/or flash, leaving as little room for error as possible. This process will erase and/or reset everything on your device. All steps are assuming you have backed up your contacts, texts, pictures, videos, etc. I do not take credit for any of this material or information.
This guide is a compilation of work from across XDA, most specifically users like @Chainfire and @Chromium, that I have simply brought together.


icon-checkmark-small.png
Step 1: Read. Read. Succeed.


Your journey down the Android path of rooting and modifying can be smooth, fun and educational, based on your attempt at learning everything you can before you begin. This is entirely up to you, the user. There is some excellent material here on XDA that I highly recommend reading over as part of step 1. Even though these 2 informational links were written for the Nexus 5, the knowledge still applies so don't skip this information!

A message from the moderators - All users please read
Yep, read it. It's for your own good. Included with some very useful general forum information, it also contains the forum rules which should also be read and understood.

[FAQ][REF]★All you need to know about Android | Read this before you post/root★
This awesome thread by @abaaaabbbb63 is a *noob friendly* collection of information every user that wants to root their phone should know. Many people blindly follow guides without even knowing what "Rooting" means. Hopefully, this will help new users (and old ones, why not?) understand what is happening with their phone, and what they will put up with. Get on over there and read it.

Be sure to checkout Post #2 below for additional information regarding your Nexus 6


icon-checkmark-small.png
Step 2: Installing The Necessary Desktop Tools


ADB and Fastboot Installation
  1. Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only).
  2. Extract the zip and place the android-sdk-windows folder on your desktop.
    **If you chose to download the slimmed sdk skip to step 5**
  3. Only if you downloaded the full sdk: Go into the android-sdk-windows folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):
    - Tools > Android SDK Tools, Android SDK Platform-tools
    - Extras > Android Support Library, Google USB Driver

  4. Only if you downloaded the full sdk: Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If you don't see this new folder, repeat the step above.
  5. To confirm that it is indeed working, open a command prompt window and enter the following commands:
    Code:
    cd Desktop/android-sdk-windows/platform-tools
    adb version
    If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case. Close the command prompt window when you are done.

icon-checkmark-small.png
Step 3: Unlock, Root & Custom Recovery


For those of you who want to get most out of your Nexus 6, you will certainly want to root it. Rooting your device provides you as the user many, many benefits. That's why you're here right now reading this. You want it all. Please note that there is always the chance of error during these processes. Bad or faulty USB cables, USB ports, bad/old device drivers on the computer, an active virus scanner. These are a few of the issues that can cause your device to fail to connect or prohibit a successful root/flash. Use good and original OEM USB cables. Uninstall any drivers you may have installed for previous mobile devices and disable your virus scanner.

>>>>>>Before you begin, make sure your N6 has USB Debugging Mode switched on<<<<<<
Before continuing, users must enable Developer Options in the devices settings and select the OEM Unlock option. To do so:

- Go into Settings
- Under About Phone, you'll be able to locate your Build Number
- Tap Build Number until you are notified that you have activated Developer options
- Go into Developer Options, ensure it is enabled and check the Enable OEM Unlock box
- While in Developer Options, ensure the USB Debugging box is checked

Unlock The Bootloader
  • Turn the phone off. Then boot it into the bootloader/fastboot mode by holding volume down + power.

  • Plug the phone into your PC, then open a command prompt window window and type:
    Code:
    cd Desktop/android-sdk-windows/platform-tools
    Code:
    fastboot devices
    This command will list the connected devices. If your phones serial number shows up you are good to go and may continue. If the phone is NOT listed this indicates that your drivers are not installed correctly. In order for you to continue you must fix your drivers so that your phone is listed under fastboot devices.

  • If the phone has been recognized by the command above, proceed to unlocking the bootloader with the following command:
    Remember that this step will wipe EVERYTHING off the phone
    Code:
    fastboot oem unlock
    On the phone a screen should pop up asking whether or not you would like to unlock the bootloader. Use the volume rockers to highlight "Yes" then press power to confirm the action.

  • After the above command has finished executing, run the following (DO NOT skip this step, it is more important than you think):
    Code:
    fastboot reboot
    The phone will reboot. Next you will be presented with a screen containing an android logo and a progress bar (this may take up to ten minutes to complete). Wait until the phone has fully booted up into android, then proceed onto the next section of the guide.

  • Close the command prompt window.

Obtain Root
The instructions below and the zip file are the work of our beloved @Chainfire. CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock firmware and be the quickest and easiest way for your first root.

- Download the ZIP file
- Extract the ZIP file
- Boot your device in bootloader/fastboot mode. Usually this can be done by turning your device off, then holding VolUp+VolDown+Power to turn it on.
- Connect your device to your computer using USB

- Windows:
--- Run root-windows.bat

- Linux
--- chmod +x root-linux.sh
--- Run root-linux.sh

- Mac OS X
--- chmod +x root-mac.sh
--- Run root-mac.sh

Follow the on-screen instructions - watch both the computer and the device!

**If you want to have root access only you can stop here.**​


A word on custom recoveries: A recovery image is the system level software for your Android that lets you perform several maintenance and recovery tasks. The stock recovery image is quite limited in what it allows you to do and therefore, flashing a custom recovery image is required to gain full control of your device’s administration. A custom recovery image allows you to perform the following tasks:

- Wipe your phone’s data (Factory reset) and cache
- Make, restore and manage backups of your phone’s operating system and software
- Mount, unmount and format your phone’s internal as well as external storage partitions
- Install a custom ROM or application from a zip file to your phone
- Wipe Dalvik cache and battery statistics
- Make logs for error reporting and debugging


Additionally, you can download the Goo Manager app to install TWRP updates.
*NOTE: I do not recommend Rom Manager as a tool to do anything but just install and/or update your recovery Do not flash ROMs from this application.

Installing A Custom Recovery

Go HERE to download the latest TWRP recovery for the Nexus 6.

  • Turn the phone off. Then boot it into the bootloader/fastboot mode by holding volume down + power.

  • Rename the recovery file that you downloaded above to recovery.img. *Make sure that you rename it to recovery.img NOT recovery.img.img* Remember that you should place the file in the platform-tools folder inside of the android-sdk-windows folder on your desktop.

  • Open command prompt and run the following commands:
    Code:
    cd Desktop/android-sdk-windows/platform-tools
    Code:
    fastboot flash recovery recovery.img

  • On the phone, use the volume buttons to scroll onto "Restart Bootloader" and hit power to select it. After the bootloader reloads, use the volume buttons to scroll onto "Recovery Mode" and power to select it. You should then be greeted with your newly installed custom recovery.
  • Close the command prompt window.


icon-checkmark-small.png
STEP 4: Making A Backup

Making a Nandroid will allow you to try out new ROMs while still keeping a safe backup in the event you experience issues during or after a custom OS or kernel installation. Be sure your device is fully charged before proceeding to the backup and flashing procedures.

If you are not already booted into recovery then do so now.

1. Boot into fastboot mode (Volume Down + Power)
2. Browse with the volume keys to Recovery Mode and press the power button
3. You are now in custom recovery.
4. In CWM go to Backup and Restore and select Backup. In TWRP select Backup. Name and select the options you want. Swipe to backup.
5. In TWRP, go to Backup and proceed to the next step(s).
6. After backup is finished, select reboot system now or stay in recovery to continue with this guide.


*NOTE: Be sure to save a copy of these backups to your computer and/or micro sd card. Having a recent backup saved to your computer and micro SD card can be useful if something happens to your phones internal memory.


icon-checkmark-small.png
Step 5A: Wiping Your Device


When flashing any ROM, it is always important to follow the proper wipe procedures in order for everything to function properly. There are various levels of wiping based on what sort of transition you may be making. In this guide, I will list the procedures for a full wipe, presuming that you are coming from the stock firmware and changing your OS completely. This is all assuming you have made the appropriate backups. ALWAYS perform the appropriate wipe before flashing a new ROM or update!

1. If you are not already in recovery, boot in now.

In CWM:
2. Select Wipe data/factory reset
3. Select Wipe Cache
4. Select Advanced and Wipe Dalvik Cache
5. Select Mounts and Storage and format /system
6. If you are transitioning from Android versions (4.4 to 4.x, etc) you must also format /data. You will lose all personal data so back it up first.

In TWRP:
2. Select Wipe
3. Select Factory Reset and wipe
4. Select System and wipe
5. If you are transitioning from Android versions (5.0 to 5.x, etc) you must also select Wipe Data and wipe. You will lose all personal data so back it up first.


icon-checkmark-small.png
Step 5B: Flashing a Custom ROM


Once you have selected a ROM for your Nexus 6:

1. Download the ROM. Be sure to download the appropriate Gapps as well.
2. From your PC, place the ROM/Gapps on your internal storage. Remember where they are.
3. Boot into custom recovery.
4. Perform the wipe listed above if you have not already.
5. From the main recovery screen:
>>CWM - Choose the "install .zip from SD Card" and confirm.
>>TWRP - Choose Install and locate the desired ROM on your internal storage.
6. Repeat step 5 and select the Gapps package.
7. Reboot system. It will take several minutes to load so be patient and don't worry. Once the phone is booted, let it sit for 5 minutes, reboot and enjoy!
 
Last edited:

xBeerdroiDx

Senior Member
Nov 10, 2012
2,356
1,744
Fort Worth
>>Additional Information

Want the performance boost available with disabling forced encryption? Check out @bbedward's guide linked below for more information and instructions.
[How-To] Disable Forced Encryption

Running Windows 8.x and having device detection issues? Be sure to grab the Google USB drivers and follow the instructions from the link below.
Nexus 6 Driver (ADB, Fastboot and MTP) for Windows and MAC

Need to return your Nexus 6 to stock for resale, OTA or warranty purposes?
Checkout @Mr hOaX's excellent guide. The procedures require the use of the fastboot tool from the Android SDK. See post #1 above for information on installing this if you have not done so already. In his guide, you have the option of returning completely to stock or select specific portions to flash (radio, recovery, etc).
[Guide][How To] Flash Factory Images For Nexus 6

Looking for stock recovery? If you need to revert to stock to receive an OTA, here's the LRX22C Android recovery:
Unzip the image and flash per the norm in fastboot.
View attachment recovery.zip
 
Last edited:

Kusanagi Fire

Senior Member
Aug 29, 2010
87
28
Redondo Beach, CA
Maybe I missed it while skimming the guide, but shouldn't there be instructions for people to get Developer Options? Allowing the PC access to your phone on first plug in (ADB won't discover the device without this)? And, most importantly for Nexus 6 (and 9), checking the "OEM Unlock" option in Developer Options?
 

p000ner

New member
Nov 21, 2014
2
0
I was just wondering but where are there custom ROMs? Im assuming there are none, but I cant get many things to work
 

sgloki77

Senior Member
Jul 14, 2012
675
200
Hallandale Beach
welp,I got the phone in the mail yesterday and had plans to stay completely stock for a couple weeks,but just couldn't help myself,grabbed the chainfire and twrp files with this guide unlocked bootloader/rooted/ installed custom recovery so here we go ...made my first nandroid already[emoji4]
 

gotsoot

Senior Member
Mar 15, 2011
56
18
So if all I do is unlock the bootloader and root, I can still receive OTAs directly?

Sent from my Moto X using Tapatalk
 

xBeerdroiDx

Senior Member
Nov 10, 2012
2,356
1,744
Fort Worth
So if all I do is unlock the bootloader and root, I can still receive OTAs directly?

Sent from my Moto X using Tapatalk

yup, but you may lose root and your bootloader may be re-locked if they push a bootloader update with it. just fyi.
the likely (hopefully) worst case is likely that you you have to unlock it again (thus wiping your data) and you have to re-setup the phone and re-root.

i cant guarantee success or failure so you assume all risk when you begin ANY modifications on your device.
 
  • Like
Reactions: bryanhayn and Ms. K

gotsoot

Senior Member
Mar 15, 2011
56
18
Are bootloader updates common for Nexus phones? I can't recall hearing about one (though this will be my first Nexus).

Sent from my Moto X using Tapatalk
 

AndrewM3

Senior Member
Jun 28, 2013
515
73
Fastboot

Can somebody confirm that fastboot is working on Windows 8.1 because last time I tried it didn't work and I had to use Ubuntu to fastboot my htc.
 

kidrobot52

Senior Member
Oct 12, 2010
297
73
NYC
No need for toolkit or drivers on Mac/Linux

Here's Mac/Linux way.

First create a file on your home folder named something like nexus 6. (This is where your going to save your files.)

Download su(I'll let op point to zip)

Download recovery (same as above from op)

Put them both in that file you created. (Make sure it is in home or you'll have to cd to wherever you put it)

OK make sure you back up your data(this will wipe everything.)

Boot into fastboot.
(Hold power and up/down button)
(Ensure you have adb and fastboot installed on your comp)

cd RootNexus (or whatever you named that folder you created)

*First things first...

./fastboot devices

Should see your device.(if not double check adb and fastboot are installed properly. Follow link. http://forum.xda-developers.com/showthread.php?t=1917237(make sure to click thanks button over there for easy setup.)

.



./fastboot oem unlock

(Follow on screen instructions, this will wipe data. )

./Fastboot restart bootloader.

(Linux users remove ./ in front of fastboot.)

Start up phone and sign in and let it completely boot. Then put SuperSU on device.

On your Mac/Linux
(Ensure you are still in root nexus folder)

./fastboot flash recovery recovery.img where recovery.img is the name of your recovery image file

Once that is done on your phone press the volume up (twice) until you see "Recovery". Then press the power button.*

Once inside recovery go to back up and back up your device.

Flash SuperSU after. Then restart and applaud yourself. Your now rooted. I've been doing it this way since forever
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 213
    2d1of9s.jpg


    Welcome to the Nexus 6 All-In-One Guide. If you are a new user that is looking for the opportunity to take advantage of your device and do it right the first time, this guide is here to point the way. This thread exists to keep all the necessary methods and material in one common place just for you. As always: Do your homework first.

    If followed correctly, this guide can be a useful tool. These steps are listed in the order in which they should be completed. The intent is to seamlessly unlock, root, backup and/or flash, leaving as little room for error as possible. This process will erase and/or reset everything on your device. All steps are assuming you have backed up your contacts, texts, pictures, videos, etc. I do not take credit for any of this material or information.
    This guide is a compilation of work from across XDA, most specifically users like @Chainfire and @Chromium, that I have simply brought together.


    icon-checkmark-small.png
    Step 1: Read. Read. Succeed.


    Your journey down the Android path of rooting and modifying can be smooth, fun and educational, based on your attempt at learning everything you can before you begin. This is entirely up to you, the user. There is some excellent material here on XDA that I highly recommend reading over as part of step 1. Even though these 2 informational links were written for the Nexus 5, the knowledge still applies so don't skip this information!

    A message from the moderators - All users please read
    Yep, read it. It's for your own good. Included with some very useful general forum information, it also contains the forum rules which should also be read and understood.

    [FAQ][REF]★All you need to know about Android | Read this before you post/root★
    This awesome thread by @abaaaabbbb63 is a *noob friendly* collection of information every user that wants to root their phone should know. Many people blindly follow guides without even knowing what "Rooting" means. Hopefully, this will help new users (and old ones, why not?) understand what is happening with their phone, and what they will put up with. Get on over there and read it.

    Be sure to checkout Post #2 below for additional information regarding your Nexus 6


    icon-checkmark-small.png
    Step 2: Installing The Necessary Desktop Tools


    ADB and Fastboot Installation
    1. Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only).
    2. Extract the zip and place the android-sdk-windows folder on your desktop.
      **If you chose to download the slimmed sdk skip to step 5**
    3. Only if you downloaded the full sdk: Go into the android-sdk-windows folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):
      - Tools > Android SDK Tools, Android SDK Platform-tools
      - Extras > Android Support Library, Google USB Driver

    4. Only if you downloaded the full sdk: Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If you don't see this new folder, repeat the step above.
    5. To confirm that it is indeed working, open a command prompt window and enter the following commands:
      Code:
      cd Desktop/android-sdk-windows/platform-tools
      adb version
      If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case. Close the command prompt window when you are done.

    icon-checkmark-small.png
    Step 3: Unlock, Root & Custom Recovery


    For those of you who want to get most out of your Nexus 6, you will certainly want to root it. Rooting your device provides you as the user many, many benefits. That's why you're here right now reading this. You want it all. Please note that there is always the chance of error during these processes. Bad or faulty USB cables, USB ports, bad/old device drivers on the computer, an active virus scanner. These are a few of the issues that can cause your device to fail to connect or prohibit a successful root/flash. Use good and original OEM USB cables. Uninstall any drivers you may have installed for previous mobile devices and disable your virus scanner.

    >>>>>>Before you begin, make sure your N6 has USB Debugging Mode switched on<<<<<<
    Before continuing, users must enable Developer Options in the devices settings and select the OEM Unlock option. To do so:

    - Go into Settings
    - Under About Phone, you'll be able to locate your Build Number
    - Tap Build Number until you are notified that you have activated Developer options
    - Go into Developer Options, ensure it is enabled and check the Enable OEM Unlock box
    - While in Developer Options, ensure the USB Debugging box is checked

    Unlock The Bootloader
    • Turn the phone off. Then boot it into the bootloader/fastboot mode by holding volume down + power.

    • Plug the phone into your PC, then open a command prompt window window and type:
      Code:
      cd Desktop/android-sdk-windows/platform-tools
      Code:
      fastboot devices
      This command will list the connected devices. If your phones serial number shows up you are good to go and may continue. If the phone is NOT listed this indicates that your drivers are not installed correctly. In order for you to continue you must fix your drivers so that your phone is listed under fastboot devices.

    • If the phone has been recognized by the command above, proceed to unlocking the bootloader with the following command:
      Remember that this step will wipe EVERYTHING off the phone
      Code:
      fastboot oem unlock
      On the phone a screen should pop up asking whether or not you would like to unlock the bootloader. Use the volume rockers to highlight "Yes" then press power to confirm the action.

    • After the above command has finished executing, run the following (DO NOT skip this step, it is more important than you think):
      Code:
      fastboot reboot
      The phone will reboot. Next you will be presented with a screen containing an android logo and a progress bar (this may take up to ten minutes to complete). Wait until the phone has fully booted up into android, then proceed onto the next section of the guide.

    • Close the command prompt window.

    Obtain Root
    The instructions below and the zip file are the work of our beloved @Chainfire. CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock firmware and be the quickest and easiest way for your first root.

    - Download the ZIP file
    - Extract the ZIP file
    - Boot your device in bootloader/fastboot mode. Usually this can be done by turning your device off, then holding VolUp+VolDown+Power to turn it on.
    - Connect your device to your computer using USB

    - Windows:
    --- Run root-windows.bat

    - Linux
    --- chmod +x root-linux.sh
    --- Run root-linux.sh

    - Mac OS X
    --- chmod +x root-mac.sh
    --- Run root-mac.sh

    Follow the on-screen instructions - watch both the computer and the device!

    **If you want to have root access only you can stop here.**​


    A word on custom recoveries: A recovery image is the system level software for your Android that lets you perform several maintenance and recovery tasks. The stock recovery image is quite limited in what it allows you to do and therefore, flashing a custom recovery image is required to gain full control of your device’s administration. A custom recovery image allows you to perform the following tasks:

    - Wipe your phone’s data (Factory reset) and cache
    - Make, restore and manage backups of your phone’s operating system and software
    - Mount, unmount and format your phone’s internal as well as external storage partitions
    - Install a custom ROM or application from a zip file to your phone
    - Wipe Dalvik cache and battery statistics
    - Make logs for error reporting and debugging


    Additionally, you can download the Goo Manager app to install TWRP updates.
    *NOTE: I do not recommend Rom Manager as a tool to do anything but just install and/or update your recovery Do not flash ROMs from this application.

    Installing A Custom Recovery

    Go HERE to download the latest TWRP recovery for the Nexus 6.

    • Turn the phone off. Then boot it into the bootloader/fastboot mode by holding volume down + power.

    • Rename the recovery file that you downloaded above to recovery.img. *Make sure that you rename it to recovery.img NOT recovery.img.img* Remember that you should place the file in the platform-tools folder inside of the android-sdk-windows folder on your desktop.

    • Open command prompt and run the following commands:
      Code:
      cd Desktop/android-sdk-windows/platform-tools
      Code:
      fastboot flash recovery recovery.img

    • On the phone, use the volume buttons to scroll onto "Restart Bootloader" and hit power to select it. After the bootloader reloads, use the volume buttons to scroll onto "Recovery Mode" and power to select it. You should then be greeted with your newly installed custom recovery.
    • Close the command prompt window.


    icon-checkmark-small.png
    STEP 4: Making A Backup

    Making a Nandroid will allow you to try out new ROMs while still keeping a safe backup in the event you experience issues during or after a custom OS or kernel installation. Be sure your device is fully charged before proceeding to the backup and flashing procedures.

    If you are not already booted into recovery then do so now.

    1. Boot into fastboot mode (Volume Down + Power)
    2. Browse with the volume keys to Recovery Mode and press the power button
    3. You are now in custom recovery.
    4. In CWM go to Backup and Restore and select Backup. In TWRP select Backup. Name and select the options you want. Swipe to backup.
    5. In TWRP, go to Backup and proceed to the next step(s).
    6. After backup is finished, select reboot system now or stay in recovery to continue with this guide.


    *NOTE: Be sure to save a copy of these backups to your computer and/or micro sd card. Having a recent backup saved to your computer and micro SD card can be useful if something happens to your phones internal memory.


    icon-checkmark-small.png
    Step 5A: Wiping Your Device


    When flashing any ROM, it is always important to follow the proper wipe procedures in order for everything to function properly. There are various levels of wiping based on what sort of transition you may be making. In this guide, I will list the procedures for a full wipe, presuming that you are coming from the stock firmware and changing your OS completely. This is all assuming you have made the appropriate backups. ALWAYS perform the appropriate wipe before flashing a new ROM or update!

    1. If you are not already in recovery, boot in now.

    In CWM:
    2. Select Wipe data/factory reset
    3. Select Wipe Cache
    4. Select Advanced and Wipe Dalvik Cache
    5. Select Mounts and Storage and format /system
    6. If you are transitioning from Android versions (4.4 to 4.x, etc) you must also format /data. You will lose all personal data so back it up first.

    In TWRP:
    2. Select Wipe
    3. Select Factory Reset and wipe
    4. Select System and wipe
    5. If you are transitioning from Android versions (5.0 to 5.x, etc) you must also select Wipe Data and wipe. You will lose all personal data so back it up first.


    icon-checkmark-small.png
    Step 5B: Flashing a Custom ROM


    Once you have selected a ROM for your Nexus 6:

    1. Download the ROM. Be sure to download the appropriate Gapps as well.
    2. From your PC, place the ROM/Gapps on your internal storage. Remember where they are.
    3. Boot into custom recovery.
    4. Perform the wipe listed above if you have not already.
    5. From the main recovery screen:
    >>CWM - Choose the "install .zip from SD Card" and confirm.
    >>TWRP - Choose Install and locate the desired ROM on your internal storage.
    6. Repeat step 5 and select the Gapps package.
    7. Reboot system. It will take several minutes to load so be patient and don't worry. Once the phone is booted, let it sit for 5 minutes, reboot and enjoy!
    40
    >>Additional Information

    Want the performance boost available with disabling forced encryption? Check out @bbedward's guide linked below for more information and instructions.
    [How-To] Disable Forced Encryption

    Running Windows 8.x and having device detection issues? Be sure to grab the Google USB drivers and follow the instructions from the link below.
    Nexus 6 Driver (ADB, Fastboot and MTP) for Windows and MAC

    Need to return your Nexus 6 to stock for resale, OTA or warranty purposes?
    Checkout @Mr hOaX's excellent guide. The procedures require the use of the fastboot tool from the Android SDK. See post #1 above for information on installing this if you have not done so already. In his guide, you have the option of returning completely to stock or select specific portions to flash (radio, recovery, etc).
    [Guide][How To] Flash Factory Images For Nexus 6

    Looking for stock recovery? If you need to revert to stock to receive an OTA, here's the LRX22C Android recovery:
    Unzip the image and flash per the norm in fastboot.
    View attachment recovery.zip
    7
    Great guide for noobs and people who are rusty with adb because they've had Samsung Galaxy devices for the last 4 years. Lol

    Thanks xBeerdroiDx. :highfive:
    5
    No need for toolkit or drivers on Mac/Linux

    Here's Mac/Linux way.

    First create a file on your home folder named something like nexus 6. (This is where your going to save your files.)

    Download su(I'll let op point to zip)

    Download recovery (same as above from op)

    Put them both in that file you created. (Make sure it is in home or you'll have to cd to wherever you put it)

    OK make sure you back up your data(this will wipe everything.)

    Boot into fastboot.
    (Hold power and up/down button)
    (Ensure you have adb and fastboot installed on your comp)

    cd RootNexus (or whatever you named that folder you created)

    *First things first...

    ./fastboot devices

    Should see your device.(if not double check adb and fastboot are installed properly. Follow link. http://forum.xda-developers.com/showthread.php?t=1917237(make sure to click thanks button over there for easy setup.)

    .



    ./fastboot oem unlock

    (Follow on screen instructions, this will wipe data. )

    ./Fastboot restart bootloader.

    (Linux users remove ./ in front of fastboot.)

    Start up phone and sign in and let it completely boot. Then put SuperSU on device.

    On your Mac/Linux
    (Ensure you are still in root nexus folder)

    ./fastboot flash recovery recovery.img where recovery.img is the name of your recovery image file

    Once that is done on your phone press the volume up (twice) until you see "Recovery". Then press the power button.*

    Once inside recovery go to back up and back up your device.

    Flash SuperSU after. Then restart and applaud yourself. Your now rooted. I've been doing it this way since forever
    5
    Added. Thanks for catching that, @Kusanagi Fire :good: