[HOW TO] Unbrick hard bricked Moto G (for Android 4.4.4 (5.x now available))

jpzex

Senior Member
Dec 15, 2014
73
33
38
Rio
Worked.
But now I'm getting another error.
"Can't Flash, Battery low"
But it doesn't charge.
Left in charger about 4 hours and nothing!

Anyone know how to solve this?

---------- Post added at 09:36 PM ---------- Previous post was at 09:29 PM ----------


Solved the low battery problem?
You have to charge through USB, (yeah, very slow) let it charge for a night and in the other day (I did it and it worked flawlessly) take USB plug out and reboot phone again into fastboot mode and later plug USB and go on flashing ;)
 

manukarki

Member
Mar 10, 2016
43
8
0
Birtamod
You have to charge through USB, (yeah, very slow) let it charge for a night and in the other day (I did it and it worked flawlessly) take USB plug out and reboot phone again into fastboot mode and later plug USB and go on flashing ;)
Just put the phone in bootloader mode. Then take a high amperage charger and plug it in. Leave it overnigh.
 

manukarki

Member
Mar 10, 2016
43
8
0
Birtamod
It didn't worked for me. Phone didn't recognize the 2A charger and didn't charge. I needed to charge through USB
I'm sorry, I thought I wrote this. Charge the phone via USB. Preferably USB 3.0, it supplies more current(I don't know in I'm correct at this current thing). Just leave it for few hours, maybe a whole night... I had the same problem, Since I didn't have one, I didn't use charger..
 
Last edited:

Armaan0777

Member
Oct 15, 2016
6
0
0
I will get motoboot.img and boot.img in rom zip files or should in downloaded it? Because i have stock 4.4.4 rom file but I can't find motoboot.img and boot.img file in it? I'm stuck at fastboot reason: failed to initialize partition table after flashing I'm getting failed to vailidate boot image boot up failed help me please

Sorry for bad english reply asap
 

manukarki

Member
Mar 10, 2016
43
8
0
Birtamod
I follow the instructions from http://www.cyberming.com/2016/09/2-dead-moto-g.html except
I used XT1032_FALCON_TKPCA_5.1_LPBS23.13-57-2_cid14_CFC.xml
Done without error but phone stuck with Warning Bootloader unlocked screen.
Please help. I can still go back to Fastboot Flash Mode screen
Well you've got to flash any of non cfc stock firmware..

---------- Post added at 08:36 PM ---------- Previous post was at 08:35 PM ----------

I will get motoboot.img and boot.img in rom zip files or should in downloaded it? Because i have stock 4.4.4 rom file but I can't find motoboot.img and boot.img file in it? I'm stuck at fastboot reason: failed to initialize partition table after flashing I'm getting failed to vailidate boot image boot up failed help me please

Sorry for bad english reply asap
They must be in the firmware file... Without them complete flash is impossible..
 
  • Like
Reactions: Armaan0777

Armaan0777

Member
Oct 15, 2016
6
0
0
I have downloaded brasil xt1033 5.0.2 rom file I extract file but i get gpt file motoboot.img file now what should i do? How can i flash it?

Help please asap please thanks
 

Armaan0777

Member
Oct 15, 2016
6
0
0
Link

Okay can you give any link please pleas it will very helpful for me and after downloading stock rom what should tell that too please

Thanks thansk reply asap

---------- Post added at 10:40 PM ---------- Previous post was at 10:39 PM ----------

After downloaded rom files what should i do tell that too please and provide any link please?

---------- Post added at 10:49 PM ---------- Previous post was at 10:40 PM ----------

I have find a rom xt1033 falcon asia ds 5.1 lpbs23.13-56-2 cid7 cfc.xml.zip

And I'm stuck on fastboot my device hard brick i done upper method now I'm getting failed to validate boot image boot up failed? So after downloading rom what should i do please help me I'm new here i dont about flashing much please reply please
 

manukarki

Member
Mar 10, 2016
43
8
0
Birtamod
Okay can you give any link please pleas it will very helpful for me and after downloading stock rom what should tell that too please

Thanks thansk reply asap

---------- Post added at 10:40 PM ---------- Previous post was at 10:39 PM ----------

After downloaded rom files what should i do tell that too please and provide any link please?

---------- Post added at 10:49 PM ---------- Previous post was at 10:40 PM ----------

I have find a rom xt1033 falcon asia ds 5.1 lpbs23.13-56-2 cid7 cfc.xml.zip

And I'm stuck on fastboot my device hard brick i done upper method now I'm getting failed to validate boot image boot up failed? So after downloading rom what should i do please help me I'm new here i dont about flashing much please reply please
I hope you are talking about moto g 1st gen. Here is the link for 5.1 Asian Version: http://forum.xda-developers.com/devdb/project/dl/?id=14466
 

Adyelson

New member
Oct 21, 2016
3
0
0
Doubts

Yeah, keep your battery in charge for at least 1 hour, shoud be shown battery low (charging).
When you get the green "battery ok" you can proceed.
hello would like to make a tuturial video since I came to you part of fastboot mode but when the command could not, wanted to know if it is possible you make a tuturial video taught step by step, if so, could leave the video link here ?
 

manukarki

Member
Mar 10, 2016
43
8
0
Birtamod
hello would like to make a tuturial video since I came to you part of fastboot mode but when the command could not, wanted to know if it is possible you make a tuturial video taught step by step, if so, could leave the video link here ?
Maybe I can help if you elaborate the problem.. Like what did you do and what's happening..