[HOW TO] Unbrick Moto G 2013! [Falcon, Peregrine] [Lollipop guide]

igoorlopess95

New member
Jun 10, 2016
2
0
0
My MOTO G IS BACK

I would like to thank those involved in this project. Thanks to you I could recover my device after more than a year waiting. On behalf of Brazil I say THANK YOU !!! :fingers-crossed::victory:
 

Criston

Senior Member
Nov 19, 2014
940
161
63
I have charged with 2A samsung charger for 6hr but still battery low tried changing battery but no success.....:confused:
charge it through charger or through PC is required?
Who have revive their moto plz give ur opinion hw u people revive ur moto G :(
are you able to blankflash the device because i was able to blankflash but after blankflash it does not boot up in fastboot but when i first blankflash it sucessfully goes into fastboot for one time
 

FabioSan

Senior Member
Dec 2, 2013
1,449
2,104
0
31
I unbrick my phone now it is able to go to fast boot but my bootloader is locked how can I flash stock firmware please help

Sent from my cn3lite using XDA-Developers mobile app
Read the Procedure. It's all there.
Hi, He tells me this ... any solution ?? and try several times :( thanks
Read the Procedure. It's all there.
are you able to blankflash the device because i was able to blankflash but after blankflash it does not boot up in fastboot but when i first blankflash it sucessfully goes into fastboot for one time
Read the Procedure. It's all there. (updated today)
You have never unlocked bootloader on your phone or you unlocked and locked it?

Sent from my Moto G (4) using Tapatalk
Blank-Flash usually re-lock bootloader until you flash back the stock rom. On my case was locked with the unbrick, then when I tried to re-unlock it said "it's already unlocked" and so it was xd
 

ilikered

Senior Member
Jul 21, 2011
213
58
0
Hyderabad
Blank-Flash usually re-lock bootloader until you flash back the stock rom. On my case was locked with the unbrick, then when I tried to re-unlock it said "it's already unlocked" and so it was xd
I think blankflash doesn't relock but shows wrong status until you flash gpt.bin and motoboot.img. But once you flash these two files and reboot, the status shows correct.


Sent from my Moto G (4) using Tapatalk
 

FabioSan

Senior Member
Dec 2, 2013
1,449
2,104
0
31
I think blankflash doesn't relock but shows wrong status until you flash gpt.bin and motoboot.img. But once you flash these two files and reboot, the status shows correct.


Sent from my Moto G (4) using Tapatalk
Yes, most probably you're right :)

Inviato dal mio ONE E1003 utilizzando Tapatalk
 

Criston

Senior Member
Nov 19, 2014
940
161
63
i followed the updated procedure of installing and reinstalling moto drivers but n o sucess the issue i am facing is not battery charging but my device is not booting up in fastboot mode after sucessfull blankflash insteed of going in fastboot mode my laptop still detecting it as RE-Link QD loader 9008

but when i first saw the new blankflash files and blankflash my device it goes into fastboot mode without and issue the issue arises after i select normal powerup to see battery status is changed or not

please help me to revive my moto g guys(ilikered and Fabioson)
 

john199

Member
Feb 21, 2016
49
1
0
Hi! I've another kind of problem that prevents me from follow the guide. When the moto g is connected to the pc, it starts blinking white 2 times and like its disconnecting and reconnecting every 2 seconds, the device is recognized as "HID-Complaint" and "USB input device". Even if I uninstall and block the automatic update of the driver, Windows continues to reinstall the same driver. 4 month ago my phone was detected as qusb-bulk, that's quite strange... i've just tried hakneo's guide, but it didn't worked :crying:
dude connect your phone to wall charger it will response same (notification light blinks) now press and hold power button until the light turn off if it isn't work try to press and hold powe+volume down(i got same issue before using this procedure) ......;):p
 
Last edited:
  • Like
Reactions: Ogang94

faise4u

Member
Sep 3, 2013
17
5
23
XT1033

My device is XT1033
How to install the stock rom of XT1033 as the dual sim is not working properly. after flashing the firmware present on the link.
Kindly provide link and instructions.... :)
 

blade_boy

Senior Member
Nov 28, 2012
194
15
0
are you able to blankflash the device because i was able to blankflash but after blankflash it does not boot up in fastboot but when i first blankflash it sucessfully goes into fastboot for one time
Blankflash succesful and it goes in fastboot whenever i put it on a wall charger or USB connection but due to low battery i cant flash the stock rom i tried charging whole night through wall charger but still battery low....now i m going to put it on usb to charge....letsee fingercrossed:(

Sent from my Primo-GH2 using XDA Free mobile app
 

ilikered

Senior Member
Jul 21, 2011
213
58
0
Hyderabad
My device is XT1033
How to install the stock rom of XT1033 as the dual sim is not working properly. after flashing the firmware present on the link.
Kindly provide link and instructions.... :)
Goto this link and download.

http://forum.xda-developers.com/showthread.php?t=3110795

Sent from my Moto G (4) using Tapatalk

---------- Post added at 12:26 PM ---------- Previous post was at 12:25 PM ----------

Blankflash succesful and it goes in fastboot whenever i put it on a wall charger or USB connection but due to low battery i cant flash the stock rom i tried charging whole night through wall charger but still battery low....now i m going to put it on usb to charge....letsee fingercrossed:(

Sent from my Primo-GH2 using XDA Free mobile app
Wall charger will not charge the device since the voltage is very low. USB connection will charge and you should be able to flash ROM in next 3-4 hours.

Sent from my Moto G (4) using Tapatalk
 
  • Like
Reactions: faise4u

faise4u

Member
Sep 3, 2013
17
5
23
leave the phone in Charging mode while connected with the laptop in the fastboot mode for at least 3 hours....
then run the command as written in the thread
mfastboot reboot
to check the status of battery it is changed to OK or not.
I have put my mobile phone in charging mode with laptop for about 5 hours then my Battery status was changed to OK.
Patience is must brother to gain your device. ;)

Blankflash succesful and it goes in fastboot whenever i put it on a wall charger or USB connection but due to low battery i cant flash the stock rom i tried charging whole night through wall charger but still battery low....now i m going to put it on usb to charge....letsee fingercrossed:(

Sent from my Primo-GH2 using XDA Free mobile app
 
Last edited:
  • Like
Reactions: blade_boy

blade_boy

Senior Member
Nov 28, 2012
194
15
0
leave the phone in Charging mode while it is in the fastboot mode for at least 3 hours....
then run the command as written in the thread
mfastboot reboot
to check the status of battery it is changed to OK or not.
I have put my mobile phone in charging mode with laptop for about 5 hours then my Battery status was changed to OK.
Patience is must brother to gain your device. ;)
Will try and give update ....thanks brother :)
 
Last edited: