How To | Unlock Booloader | HBOOT S-Off | Flash Recovery | Root | Sensation

gsm_king2007

Member
Oct 18, 2009
11
0
0
thanks mr ganeshp for help .
my phone come back thankssss
but only go to fastboot and i cant change original rom on it beacuse i cant find this rom (htc_044............cid 707)
can you help to find this rom for sensation xe or do you have any suggestion for solve this problem ??/
and i write recovery on it but cant goes to recovery..
what should i do ?:(
 

ganeshp

Senior Member
Mar 15, 2012
5,499
3,262
0
Hyderabad
thanks mr ganeshp for help .
my phone come back thankssss
but only go to fastboot and i cant change original rom on it beacuse i cant find this rom (htc_044............cid 707)
can you help to find this rom for sensation xe or do you have any suggestion for solve this problem ??/
and i write recovery on it but cant goes to recovery..
what should i do ?:(
Why don't you try soff again?
Also what do you mean by recovery won't write?

Sent from my HTC Sensation 4G using xda premium
 
  • Like
Reactions: moha_moha20106

[email protected]

Senior Member
Mar 18, 2011
307
21
18
Hyderabad
Everything is fi9 but my question is I m currently on Revolutionary HD Rom with 4EXT Recovery with HD Revolution and Busy-box with root installed. 4EXT recovery is fi9 or shud I switch it to Clockwork recovery 5.... ?
 

rzr86

Senior Member
May 21, 2012
8,109
2,455
258
35
Nafpaktos
Thankz Mate :)
My next question is why I can't install few Roms like MIUI ? its because of the requirement ? I have to Install something else first ? Like CM10 ? or 4.1 ROM ?
Currently on Inspiration 1.0 shifted Revolutionary HD
See in first post of miui's thread
It has a specific way on how to install it
Probably you didn't flash gapps also

Sent from my HTC Sensation using xda premium
 
Last edited:
  • Like
Reactions: moha_moha20106

moha_moha20106

Senior Member
Jul 6, 2010
198
94
0
cairo
You need to have root for soff ofcourse
You are HTC-DEV unlocked right?
Then use my one click root from my soff guide.. Just one click root.. (link in my signature)

Sent from my Nexus 7 using xda premium
yes dear, my phone still S-ON

and i was unlocked it by HTCDEV

ok , now i rooted it, but still need to know something please

can i keeb my phone S-ON, and change bootloader from ***RELOCKED*** >> ***LOCKED*** ?

thank you for your respect, thank you for your reply
 

rzr86

Senior Member
May 21, 2012
8,109
2,455
258
35
Nafpaktos
yes dear, my phone still S-ON

and i was unlocked it by HTCDEV

ok , now i rooted it, but still need to know something please

can i keeb my phone S-ON, and change bootloader from ***RELOCKED*** >> ***LOCKED*** ?

thank you for your respect, thank you for your reply
you can keep S-ON
but you can't make it locked
it will remain just relocked
 
  • Like
Reactions: moha_moha20106

aapman88

Member
Dec 3, 2011
34
1
0
I did the guide and everything seemed to work.
I had to install the root file a few times before it succeeded.
Now I m still on stock rom but I have Super user in my app drawer.
However when I try to use titanium backup it gives the error that I m not rooted.
Also in the Super user app under info, su binary v2.3.2-efgh: it says sr---wt in red.
So I guess something went wrong and was wondering what to do to fix this.
Could I just use the one click root tool? or should I install the root.zip again?
Help is much appreciated
 
Last edited:

rzr86

Senior Member
May 21, 2012
8,109
2,455
258
35
Nafpaktos
I did the guide and everything seemed to work.
I had to install the root file a few times before it succeeded.
Now I m still on stock rom but I have Super user in my app drawer.
However when I try to use titanium backup it gives the error that I m not rooted.
Also in the Super user app under info, su binary v2.3.2-efgh: it says sr---wt in red.
So I guess something went wrong and was wondering what to do to fix this.
Could I just use the one click root tool? or should I install the root.zip again?
Help is much appreciated
flash this zip from recovery
http://download.chainfire.eu/331/SuperSU/UPDATE-SuperSU-v1.32.zip
 

moha_moha20106

Senior Member
Jul 6, 2010
198
94
0
cairo
Again, i was try the wire step over than 20 times, Rooted my phone + tempotoot.bat + controlbear

the message is :

wait for device ..... please wait

adb timed out. adb killer
and another messages appear sometimes :

install device drivers

the bear will not happen tonight : (
and my battery is almost empty, i was Lunch CMD from my directory :

adb reboot-bootloader

fastboot oem lock

fastboot reboot-bootloader
then install the old/main official RUU.exe to help my phone

what can i do to S-OFF my phone ???

any way to S-OFF it without short hardware, you know : It's very dangerous

you do short-circuit between 3.3 volt and GND

the 3.3v is for EPROM (Electronic Power Rom ) and Processor, this is the main volt to work

if the EPROM loss or erase the data that it have, my phone will only be piece of PLASTIC !!

if you see the pic again and again, you will found TOW pierce/Perforate, the one you tell me use is for 3.3v

the another one is for 1.2v, this volt is for RAM only

so you do a dangerous steps and it working, cause you take the first time of (EPROM restarting) after short-circuit to put your data, it's use nano second, and the time you did it correctly is by luck cause you can't Calculate the nano Seconds wich the EPROM restart

so we try and try to take the RIGHT TIME to put the data on EPROM

now, i'm apologize for my words

BUT I STILL NEED TO S-OFF MY PHONE PLZ without this steps

EDIT : maybe it will not work with XE 1.29.000
 
Last edited:

rzr86

Senior Member
May 21, 2012
8,109
2,455
258
35
Nafpaktos
Again, i was try the wire step over than 20 times, Rooted my phone + tempotoot.bat + controlbear

the message is :



and another messages appear sometimes :



and my battery is almost empty, i was Lunch CMD from my directory :



then install the old/main official RUU.exe to help my phone

what can i do to S-OFF my phone ???

any way to S-OFF it without short hardware, you know : It's very dangerous

you do short-circuit between 3.3 volt and GND

the 3.3v is for EPROM (Electronic Power Rom ) and Processor, this is the main volt to work

if the EPROM loss or erase the data that it have, my phone will only be piece of PLASTIC !!

if you see the pic again and again, you will found TOW pierce/Perforate, the one you tell me use is for 3.3v

the another one is for 1.2v, this volt is for RAM only

so you do a dangerous steps and it working, cause you take the first time of (EPROM restarting) after short-circuit to put your data, it's use nano second, and the time you did it correctly is by luck cause you can't Calculate the nano Seconds wich the EPROM restart

so we try and try to take the RIGHT TIME to put the data on EPROM

now, i'm apologize for my words

BUT I STILL NEED TO S-OFF MY PHONE PLZ without this steps

EDIT : maybe it will not work with XE 1.29.000
Unfortunately the only way to s-off is doing the wire trick
Also it is compatible with 1.29 hboot version
Probably you need to install HTC drivers
And uninstall HTC sync if you have installed it

Sent from my HTC Sensation using xda premium
 
  • Like
Reactions: moha_moha20106

moha_moha20106

Senior Member
Jul 6, 2010
198
94
0
cairo
Unfortunately the only way to s-off is doing the wire trick
Also it is compatible with 1.29 hboot version
Probably you need to install HTC drivers
And uninstall HTC sync if you have installed it

Sent from my HTC Sensation using xda premium
Dear rzr86,

I always find you explicitly, and have more solutions

but i was ignored S-off my phone, cause i found alternative that let me flash Arabic Rom

thank you very much, and thank you for your obvious replies
 
  • Like
Reactions: rzr86