HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)

Search This thread

pof

Retired Moderator
Mar 18, 2005
3,571
72
40
Barcelona
pof.eslack.org

After flashing HardSPL you'll be able to flash any Kaiser ROM to your device!

This tool will allow you to change the ROM language, flash cooked ROMs, custom splash screens, etc...


FEATURES

  1. SuperCID / Security Level=0
  2. Does not check NBH signatures
  3. Based on 1.50 MFG bootloader, rtask enabled
  4. Accept any password
  5. Model ID check only 4 chars
  6. SPL overwrite DISABLED (to bypass, use SSPL-KAIS.exe)

INSTRUCTIONS

  • Connect Kaiser to computer using USB cable
  • Make sure ActiveSync icon is GREEN
  • RUN kaiser-HardSPL.exe on Computer (PC)
  • Follow instructions on screen:

Code:
 *****************************************************************************
                  XDA-Developers HTC KAISER CID Unlocker by pof
   HTC TyTN II P4550 / T-Mobile MDA Vario III / AT&T Tilt (8900, 8915, 8925)
    Swisscom XPA 1605 / Vodafone v1615 / Vodafone VPA Compact V / SFR v1615

 Features:
    1. SuperCID / Security Level=0   2. Does not check NBH signatures
    3. Model ID check only 4 bytes   4. Based on MFG bootloader, rtask enabled
    5. Accept any password           6. SPL overwrite disabled

 This software is free to use but at your own risk, I take no responsiblity
 for any conflict, fault, or damage caused by this unlocking procedure.
 No warranties of any kind are given, any commercial use is prohibited.

 Your donation is a strong incentive to continue research on new devices,
 if you find my work useful please cosider making a PayPal donation to:
                                [email protected]
                  Any donation amount is greatly appreciated :-)

 *****************************************************************************

 Please make sure ActiveSync is enabled (GREEN icon in systray)
 and hit ENTER to start...

 Kaiser JumpSPL is running on your device, please check your device
 screen and follow the steps until you see the tri-color screen.
 When done hit ENTER to continue...

 Device screen should be now TRI-COLOR and show "USB"
     ===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
     ===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
     ===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
 ActiveSync icon should become gray after that.
 When done hit ENTER to continue...

 Phone screen should now be tri-color and the activesync icon gray
 if not, the loading process has failed and you'll have to repeat it again.

 If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
 window will start, allowing you to flash HardSPL on your device.

 Hit CTRL+C to Cancel or ENTER to continue...

 Follow the steps on the wizard to flash HardSPL, when finished your
 device will reboot. It should last no more than 1 minute.
 - Launching RUU, please wait...

 Process is finished, congratulations!
 If you find it useful don't forget to donate :)
 *****************************************************************************
 (c)2007 pof - XDA Developers

 Hit ENTER to quit.


THANKS TO:
- Esteve, Olipro, arc, pancake, HaRET developers, and everyone else who I forget... :rolleyes: without your help this wouldn't have been possible!


DISCLAIMER

This software is free to use but at your own risk, I take no responsiblity for any conflict, fault, or damage caused by this unlocking procedure.
No warranties of any kind are given, any commercial use is prohibited.


DONATIONS


Your donations are a strong incentive to continue research on new devices, if you find JumpSPL useful please cosider making a PayPal donation. Any donation amount is greatly appreciated :)

Enjoy! ;)
 

Attachments

  • kaiser-HardSPLv1.zip
    616.5 KB · Views: 173,539
Last edited:

Frontline

Senior Member
Apr 25, 2003
55
0
Hi, what tool did you use to upload the HTC rom? I've just found the rom on the forum, but i can't seem to find the tool to upload it.

PS. I'm using windows vista
 

tochill

Member
May 3, 2006
24
0
Are you using vista..sometimes it doesnt look for a new set of drivers for the Phone when its in tri color mode..try rebooting and leaving the phone in tri color mode...once you do that, start from scratch after it gets all the drivers installed
 

kavi

Senior Member
Nov 13, 2006
241
48
Los Angeles
www.clublk.us
Are you using vista..sometimes it doesnt look for a new set of drivers for the Phone when its in tri color mode..try rebooting and leaving the phone in tri color mode...once you do that, start from scratch after it gets all the drivers installed

Ok rebooted and going to give it another shot. Thanks for the prompt replies.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 4

    After flashing HardSPL you'll be able to flash any Kaiser ROM to your device!

    This tool will allow you to change the ROM language, flash cooked ROMs, custom splash screens, etc...


    FEATURES

    1. SuperCID / Security Level=0
    2. Does not check NBH signatures
    3. Based on 1.50 MFG bootloader, rtask enabled
    4. Accept any password
    5. Model ID check only 4 chars
    6. SPL overwrite DISABLED (to bypass, use SSPL-KAIS.exe)

    INSTRUCTIONS

    • Connect Kaiser to computer using USB cable
    • Make sure ActiveSync icon is GREEN
    • RUN kaiser-HardSPL.exe on Computer (PC)
    • Follow instructions on screen:

    Code:
     *****************************************************************************
                      XDA-Developers HTC KAISER CID Unlocker by pof
       HTC TyTN II P4550 / T-Mobile MDA Vario III / AT&T Tilt (8900, 8915, 8925)
        Swisscom XPA 1605 / Vodafone v1615 / Vodafone VPA Compact V / SFR v1615
    
     Features:
        1. SuperCID / Security Level=0   2. Does not check NBH signatures
        3. Model ID check only 4 bytes   4. Based on MFG bootloader, rtask enabled
        5. Accept any password           6. SPL overwrite disabled
    
     This software is free to use but at your own risk, I take no responsiblity
     for any conflict, fault, or damage caused by this unlocking procedure.
     No warranties of any kind are given, any commercial use is prohibited.
    
     Your donation is a strong incentive to continue research on new devices,
     if you find my work useful please cosider making a PayPal donation to:
                                    [email protected]
                      Any donation amount is greatly appreciated :-)
    
     *****************************************************************************
    
     Please make sure ActiveSync is enabled (GREEN icon in systray)
     and hit ENTER to start...
    
     Kaiser JumpSPL is running on your device, please check your device
     screen and follow the steps until you see the tri-color screen.
     When done hit ENTER to continue...
    
     Device screen should be now TRI-COLOR and show "USB"
         ===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
         ===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
         ===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
     ActiveSync icon should become gray after that.
     When done hit ENTER to continue...
    
     Phone screen should now be tri-color and the activesync icon gray
     if not, the loading process has failed and you'll have to repeat it again.
    
     If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
     window will start, allowing you to flash HardSPL on your device.
    
     Hit CTRL+C to Cancel or ENTER to continue...
    
     Follow the steps on the wizard to flash HardSPL, when finished your
     device will reboot. It should last no more than 1 minute.
     - Launching RUU, please wait...
    
     Process is finished, congratulations!
     If you find it useful don't forget to donate :)
     *****************************************************************************
     (c)2007 pof - XDA Developers
    
     Hit ENTER to quit.


    THANKS TO:
    - Esteve, Olipro, arc, pancake, HaRET developers, and everyone else who I forget... :rolleyes: without your help this wouldn't have been possible!


    DISCLAIMER

    This software is free to use but at your own risk, I take no responsiblity for any conflict, fault, or damage caused by this unlocking procedure.
    No warranties of any kind are given, any commercial use is prohibited.


    DONATIONS


    Your donations are a strong incentive to continue research on new devices, if you find JumpSPL useful please cosider making a PayPal donation. Any donation amount is greatly appreciated :)

    Enjoy! ;)