[HTC ONE M7] Collection of Firmware up to 6.06.401.1 modified HBOOT, (No Red warning)

What is the Model ID of your HTC One?


  • Total voters
    3,287
Search This thread

jolishj

Senior Member
Jun 21, 2013
211
827
Melbourne
Hi Everyone,


OP UPDATE: DON'T reboot your device until you get a success message, also double check you understand EVERY STEPS before trying it out. I AM NOT RESPONSIBLE FOR ANYTHING IF YOU MESS UP THE STEPS...!!

This firmware is WITH OUT the development disclaimer overlay:

This build is for
development purposes only
Do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.​

** With Latest Radio **

Upgrade your HTC Sync to 3.1.13.0 if you flash this firmware..


DOWNLOAD Firmware 6.06.401.1, NO Red Warning, --md5: -- dd9f5fb8416de0fb6f533ce3e40bbafe

These Firmwares DO NOT delete the contents in SD Card. But please make a back up before flashing for safety.


**N.B. Thanks and Donations are most welcome ** :p



Requirements for flashing: S-OFF

  • Please Follow the instructions carefully!! Otherwise you may BRICK your device.
  • Please note that it is for the HTC One M7 UL Only. Not Tested with Sprint Version!!
  • You may change the MID (at your own risk) in the android-info.txt attached and replace the one inside the firmware.zip if you have another MID.
  • If you have Super CID "11111111", you don't need to worry about the CID lists inside the android-info.txt file

DON'T FORGET TO CLICK THANKS IF YOU FIND THIS THREAD USEFUL. :p


Dear All,

I have noted a lot downloads of the firmware and most of them just don't even bother clicking thanks :silly:

I appreciate your encouragements and appreciation for my work so that it will give motivation to keep all you updated.

Thanks a lot for everyone contributed..

:p

Thanks @thoughtlesskyle for this video tutorial http://youtu.be/ybu7fZa41so



To Check ModelIDs:

Code:
adb reboot bootloader
----- Mobile reboots---

Code:
fastboot getvar all
----Check the following line in the command window: INFOmodelid: PN0714000----


Steps for flashing:

-----

Windows users, need to do these steps first:
- move the file you downloaded and renamed (firmware.zip) to the C:\adb\ folder.
- next, in the C:\adb\ folder hold down SHIFT key and RIGHT-CLICK and select "Open command window here".

-----

Next, plug in phone to PC and type this in terminal/command prompt:

Code:
adb reboot bootloader
----- Mobile reboots---

Now type:

Code:
fastboot reboot-bootloader
After that, type:

Code:
fastboot oem rebootRUU 

Note: You should see a silver HTC logo come up on your phone after executing this command.
Note: if this command freezes,  just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
Finally:

Code:
 fastboot flash zip C:\adb\firmware.zip
Got this:

Code:
      sending 'zip' (30367 KB)... OKAY [  6.184s]
                 writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOstart image[hboot] unzipping for pre-update check...
INFOstart image[hboot] flushing...
INFO[RUU]WP,hboot,0
INFO[RUU]WP,hboot,99
INFO[RUU]WP,hboot,100
INFO...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 8.090s

Repeat the same command: !! IMPORTANT !! -- PLEASE WAIT A FEW SECONDS BEFORE ISSUING THE COMMAND AGAIN; Otherwise the cmd prompt will be non-responsive saying "Sending data...", If this happens, try disconnecting the USB cable and reconnect.

Code:
 fastboot flash zip C:\adb\firmware.zip
You will see this:

Code:
      sending 'zip' (30367 KB)... OKAY [  3.277s]
                 writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOstart image[adsp] unzipping & flushing...
INFO[RUU]UZ,adsp,0
INFO[RUU]UZ,adsp,18
INFO[RUU]UZ,adsp,30
INFO[RUU]UZ,adsp,41
INFO[RUU]UZ,adsp,52
INFO[RUU]UZ,adsp,64
INFO[RUU]UZ,adsp,75
INFO[RUU]UZ,adsp,86
INFO[RUU]UZ,adsp,97
INFO[RUU]UZ,adsp,100
INFO[RUU]WP,adsp,0
INFO[RUU]WP,adsp,100
INFO...... Successful
INFOstart image[cir] unzipping & flushing...
INFO[RUU]UZ,cir,0
INFO[RUU]UZ,cir,100
INFO...... Successful
INFOstart image[pg2fs_spcustom] unzipping & flushing...
INFO[RUU]UZ,pg2fs_spcustom,0
INFO[RUU]UZ,pg2fs_spcustom,31
INFO[RUU]UZ,pg2fs_spcustom,57
INFO[RUU]UZ,pg2fs_spcustom,82
INFO[RUU]UZ,pg2fs_spcustom,100
INFO...... Successful
INFOstart image[rpm] unzipping & flushing...
INFO[RUU]UZ,rpm,0
INFO[RUU]UZ,rpm,100
INFO[RUU]WP,rpm,0
INFO[RUU]WP,rpm,100
INFO...... Successful
INFOstart image[sbl1-1] unzipping & flushing...
INFO[RUU]UZ,sbl1-1,0
INFO[RUU]UZ,sbl1-1,100
INFOsignature checking...
INFOverified fail
INFO..... Bypassed
INFOstart image[sbl1-2] unzipping & flushing...
INFO[RUU]UZ,sbl1-2,0
INFO[RUU]UZ,sbl1-2,100
INFOsignature checking...
INFOverified fail
INFO..... Bypassed
INFOstart image[sbl1-3] unzipping & flushing...
INFO[RUU]UZ,sbl1-3,0
INFO[RUU]UZ,sbl1-3,100
INFOsignature checking...
INFO[RUU]WP,sbl1-3,0
INFO[RUU]WP,sbl1-3,100
INFO...... Successful
INFOstart image[sbl2] unzipping & flushing...
INFO[RUU]UZ,sbl2,0
INFO[RUU]UZ,sbl2,100
INFO[RUU]WP,sbl2,0
INFO[RUU]WP,sbl2,100
INFO...... Successful
INFOstart image[sbl3] unzipping & flushing...
INFO[RUU]UZ,sbl3,0
INFO[RUU]UZ,sbl3,100
INFO[RUU]WP,sbl3,0
INFO[RUU]WP,sbl3,100
INFO...... Successful
INFOstart image[tp] unzipping & flushing...
INFO[RUU]UZ,tp,0
INFO[RUU]UZ,tp,100
INFO..... Bypassed
INFOstart image[tp] unzipping & flushing...
INFO[RUU]UZ,tp,0
INFO[RUU]UZ,tp,100
INFO...... Successful
INFOstart image[tz] unzipping & flushing...
INFO[RUU]UZ,tz,0
INFO[RUU]UZ,tz,100
INFO[RUU]WP,tz,0
INFO[RUU]WP,tz,100
INFO...... Successful
INFOstart image[radio] unzipping & flushing...
INFO[RUU]UZ,radio,0
INFO[RUU]UZ,radio,6
INFO[RUU]UZ,radio,11
INFO[RUU]UZ,radio,17
INFO[RUU]UZ,radio,23
INFO[RUU]UZ,radio,28
INFO[RUU]UZ,radio,34
INFO[RUU]UZ,radio,40
INFO[RUU]UZ,radio,46
INFO[RUU]UZ,radio,52
INFO[RUU]UZ,radio,59
INFO[RUU]UZ,radio,69
INFO[RUU]UZ,radio,75
INFO[RUU]UZ,radio,81
INFO[RUU]UZ,radio,87
INFO[RUU]UZ,radio,92
INFO[RUU]UZ,radio,99
INFO[RUU]UZ,radio,100
INFO[RUU]WP,radio,0
INFO[RUU]WP,radio,23
INFO[RUU]WP,radio,46
INFO[RUU]WP,radio,69
INFO[RUU]WP,radio,92
INFO[RUU]WP,radio,100
INFO...... Successful
INFOstart image[rcdata] unzipping & flushing...
INFO[RUU]UZ,rcdata,0
INFO[RUU]WP,rcdata,0
INFO...... Successful
OKAY [ 54.864s]
finished. total time: 58.143s


Note:The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.


Last Step:

Code:
fastboot reboot
Then I went back to the bootloader mode (after the phone reboots successfully):

If Boot-Loop Occurs*:
Code:
fastboot erase cache

Restart in boot-loader to check whether everything is fine*:
Code:
adb reboot bootloader
--Phone reboots into bootloader--
Code:
fastboot getvar all

The resulting variable may look like this:
Code:
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.06.401.1
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: HT34LXXXXXXX
INFOimei: 
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4259mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-01dc707e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!

Firmware 5.11.1540.9, NO Red Warning, --md5: -- 6734d095499a72519335bb894503708f

Firmware 4.19.401.11, NO Red Warning, --md5: -- 8f3a59cdbcc84b9ff2319495eee6ae98

Firmware 4.19.401.9, NO Red Warning, --md5: -- DE93220BEB19CA1FCB3FDF407F2B3D3F


Firmware 4.19.401.8, NO Red Warning, --md5: 30772981922e19437085c92adbea9658 --

Firmware 4.19.1540.4, NO Red Warning, --md5: 49dbb024b28a17383da35593d6cbc860 --



Firmware 4.06.1540.3, NO Red Warning ** --md5: 227c88abad17dba0561a91ad6d353373 --


Firmware 4.06.1540.2, NO Red Warning ** --md5: c9b68c6a17ae323112c99ce0550dba38 --

Previous firmware with modified HBOOT,
Firmware 3.62.401.1 with NO Red Warning
are below.

Firmware 3.62.401.1 for MODEL ID: PN0710000 NO Red Warning --md5: 728e3dc18abde0fd10835376332f81ec --

Firmware 3.62.401.1 for MODEL ID: PN0711000 NO Red Warning -- md5: 7fb62e47f347ae05baf4dd821b497752 --

Firmware 3.62.401.1 for MODEL ID: PN0712000 NO Red Warning --md5: 7ab96062ff848550a45dd035967adc83 --

Firmware 3.62.401.1 for MODEL ID: PN0713000 NO Red Warning -- md5: 6bcb6dd99da4d4c73a24725b814e161b --

Firmware 3.62.401.1 for MODEL ID: PN0714000 NO Red Warning -- md5: 6b2d5bf151ddf6ebbb7c6303f6db1889 --

Firmware 3.57.401.500 for MODEL ID: PN0714000

Firmware 3.57.401.500 for MODEL ID: PN0713000

Firmware 3.57.401.500 for MODEL ID: PN0712000

Firmware 3.57.401.500 for MODEL ID: PN0710000


Firmware 3.22.1540.1 : MODEL ID: PN0710000

Firmware 2.24.401.1 : MODEL ID: PN0710000 for Android 4.2.2

FIRMWARE FAQ:


Q: Do I need S-OFF for firmware flashing?

A: YES, It is a must.

Q: Do I need to update my firmware?

A: NO, but updating firmware ensures optimal phone performance.

Q: Does it matter when I flash the firmware (before or after new ROM install)

A: No.

Q: Will updating the firmware erase my SD card or Apps?

A: No, The firmware files provided here does not erase none of those.

Q: If I only flash the ROM, will I get updated to the latest firmware?

A: No. You must flash the firmware separate in most cases.

Q: Can I install a UL edition firmware on a U edition phone?

A: Yes (may be), but you won't have LTE or may experience some other incompatibilities.


Possible Errors while flashing:
If it says "FAILED" do not immediately reboot the device. If you reboot with a FAIL it could brick your device! Listed below error are safe to reboot:
If you encounter one of them, you can just reboot. Nothing changes.
- 12 signature fail (means a signed firmware package is required. This would only happen with S-ON phones though. but safe to reboot)
- 23 parsing image fail (means something wrong with the image in the zip)
- 32 header error (means the zip couldn’t be read and unzipped properly)
- 41 Wrong Model ID (means the MODEL ID in the android-info.txt does not match with your device. you can reboot the device. You may change the MID manually in the android-info.txt at your own risk.)
- 42 Wrong Customer ID (means you need to include the CID of your device in the android-info.txt or change the CID to superCID.)
- 99 UNKOWN (is not yet clear but safe to reboot)

DON'T reboot until you get a success message if you get an error bellow:
- 90 hboot pre-update (means it only flashed hboot and you have to run the process again immediately to flash all other partitions. Don’t reboot before repeating the command.
If the command window stuck in the middle for a long time, wait for a few minutes and please unplug the USB and replug it again. Repeat the command again. DON'T reboot until you get a success message.)


Editing android-info.txt

- Use an Editor that doesn't doesn't alter the linebreaks. Don't use Windows Notepad. Use Notepad++
- Only one MID can be in the file.
- CID's can easily be added or removed- one per line

To Get SUPERCID
Code:
fastboot oem writecid 11111111

RUUmode:

RUU Mode is the mode used for RUU flashes by HTC. It is different from the normal fastboot. You must flash the firmware only in RUU Mode. The RUU mode can be identified by the black background with only a silver HTC logo and if a command is being active a green progress bar will show the progress of any command being excecuted.

For Further Reading
Some more useful threads that might be helpful to you:
- Mike1986’s Firmware thread
- Vomer’s ultimate guide thread
- hes_theone64’s radio flash guide for recovery
- chrisch1974's HOW-TO Flash a custom splash screen
- Sneakyghost's Firmware Flashing & Hboots red warning gone thread
- HTC ONE Partition List:
- Mike1986 Partition explanation:



You must be aware that writing to the bootloader -partition increases your risk to lose the device exponentially. You understand and agree that i cannot be held responsible for such or any other damages. The flash process is theoretically safe and tested. I will not accept any responsibility. The method itself is developed by Google and HTC, i have only adapted it and you execute it. You understand that you should not do it if you are not willing to accept this risk.

For More info, about Super CID, S-OFF and Firmware update process, check this thread:

[Guide] Vomer's Ultimate AIO - S-OFF, SuperCID, Firmware Upgrade & Custom Recovery


Thanks @vomer and @Sneakyghost
 

Attachments

  • android-info.txt
    263 bytes · Views: 3,125
Last edited:

jonas2295

Senior Member
Jan 4, 2010
5,128
2,787
Bavaria
Thanks for this. But does this firmware package wipe SD contents?

No, firmware never wiped my SD card yet. I have flashed several firmware zips since I have my one and it never wiped anything!

Only thing is to make sure you are s-off before you flash the zip as it might contain a exploit fixed hboot.


Renovated.
 

Huey85

Senior Member
Dec 29, 2006
2,156
405
Melbourne
No, firmware never wiped my SD card yet. I have flashed several firmware zips since I have my one and it never wiped anything!

Only thing is to make sure you are s-off before you flash the zip as it might contain a exploit fixed hboot.


Renovated.
Thanks. I'm well aware that you need to be S-Off to flash firmware via fastboot. But my concern was more around having the device's SD partition wiped, as you can see, with the original 3.57 firmware released by LlabTooFeR here, he stated that it did wipe his SD partition.
 

atomantmk

Senior Member
Jun 5, 2011
502
164
Strumica, Macedonia
There is one mistake for model MODEL ID: PN0710000,
line mainver: 1.28.401.7 change it with mainver: 3.57.401.500

Code:
modelid: PN0710000
cidnum: 11111111
cidnum: 22222222
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__A07
cidnum: HTC__J15
cidnum: HTC__016
mainver: 3.57.401.500
btype:1
aareport:1
DelCache:1
hbootpreupdate:3
 

ClydeB1

Senior Member
May 6, 2009
11,018
4,274
No, firmware never wiped my SD card yet. I have flashed several firmware zips since I have my one and it never wiped anything!

Only thing is to make sure you are s-off before you flash the zip as it might contain a exploit fixed hboot.


Renovated.

The latest firmware provided by Llabtoofer wipes the sd card (even confirmed by him). The other customized firmware zips floating around have removed the offending files though.
 

jolishj

Senior Member
Jun 21, 2013
211
827
Melbourne
SD Card won't get wiped by default

The latest firmware provided by Llabtoofer wipes the sd card (even confirmed by him). The other customized firmware zips floating around have removed the offending files though.

This firmware doesn't wipe SD card data... You can flash it before or after flashing the 4.3 version ROMs. But recommend before flashing the custom ROM s.

This firmware is the newest released so far for WWE. It is modified to remove the red warning message.:laugh:

You flash it in RUU mode only and only if you have S-OFF.
 

ClydeB1

Senior Member
May 6, 2009
11,018
4,274
Yeah I use the modified firmwares usually.

Renovated.
Always the safest option ;)
This firmware doesn't wipe SD card data... You can flash it before or after flashing the 4.3 version ROMs. But recommend before flashing the custom ROM s.

This firmware is the newest released so far for WWE. It is modified to remove the red warning message.:laugh:

You flash it in RUU mode only and only if you have S-OFF.
Sorry I wasn't implying that your firmware did wipe the sd card, I was only responding to a post saying that firmware doesn't wipe data. Those that have used LLabtoofer's firmware for example (including him) have however had their sd cards wiped and I am only trying to prevent some person using the firmware and loosing all of their precious photos and videos etc without being aware of the possible risks.
 

Twist79

Senior Member
Jul 16, 2011
322
92
Vienna
OnePlus 8T
OnePlus 9
This is my getvar all result after the flash:

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.57.401.500
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4308mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6cad6811
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s

is this all right?
 

spdrosin

Senior Member
Jan 20, 2011
676
43
36
Thessaloniki
There is one mistake for model MODEL ID: PN0710000,
line mainver: 1.28.401.7 change it with mainver: 3.57.401.500

Code:
modelid: PN0710000
cidnum: 11111111
cidnum: 22222222
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__A07
cidnum: HTC__J15
cidnum: HTC__016
mainver: 3.57.401.500
btype:1
aareport:1
DelCache:1
hbootpreupdate:3

Yes indeed.

Can someone upload the correct modified firmware for PN0710000 ?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 657
    Hi Everyone,


    OP UPDATE: DON'T reboot your device until you get a success message, also double check you understand EVERY STEPS before trying it out. I AM NOT RESPONSIBLE FOR ANYTHING IF YOU MESS UP THE STEPS...!!

    This firmware is WITH OUT the development disclaimer overlay:

    This build is for
    development purposes only
    Do not distribute outside of HTC
    without HTC's written permission.
    Failure to comply may
    lead to legal action.​

    ** With Latest Radio **

    Upgrade your HTC Sync to 3.1.13.0 if you flash this firmware..


    DOWNLOAD Firmware 6.06.401.1, NO Red Warning, --md5: -- dd9f5fb8416de0fb6f533ce3e40bbafe

    These Firmwares DO NOT delete the contents in SD Card. But please make a back up before flashing for safety.


    **N.B. Thanks and Donations are most welcome ** :p



    Requirements for flashing: S-OFF

    • Please Follow the instructions carefully!! Otherwise you may BRICK your device.
    • Please note that it is for the HTC One M7 UL Only. Not Tested with Sprint Version!!
    • You may change the MID (at your own risk) in the android-info.txt attached and replace the one inside the firmware.zip if you have another MID.
    • If you have Super CID "11111111", you don't need to worry about the CID lists inside the android-info.txt file

    DON'T FORGET TO CLICK THANKS IF YOU FIND THIS THREAD USEFUL. :p


    Dear All,

    I have noted a lot downloads of the firmware and most of them just don't even bother clicking thanks :silly:

    I appreciate your encouragements and appreciation for my work so that it will give motivation to keep all you updated.

    Thanks a lot for everyone contributed..

    :p

    Thanks @thoughtlesskyle for this video tutorial http://youtu.be/ybu7fZa41so



    To Check ModelIDs:

    Code:
    adb reboot bootloader
    ----- Mobile reboots---

    Code:
    fastboot getvar all
    ----Check the following line in the command window: INFOmodelid: PN0714000----


    Steps for flashing:

    -----

    Windows users, need to do these steps first:
    - move the file you downloaded and renamed (firmware.zip) to the C:\adb\ folder.
    - next, in the C:\adb\ folder hold down SHIFT key and RIGHT-CLICK and select "Open command window here".

    -----

    Next, plug in phone to PC and type this in terminal/command prompt:

    Code:
    adb reboot bootloader
    ----- Mobile reboots---

    Now type:

    Code:
    fastboot reboot-bootloader
    After that, type:

    Code:
    fastboot oem rebootRUU 
    
    Note: You should see a silver HTC logo come up on your phone after executing this command.
    Note: if this command freezes,  just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
    Finally:

    Code:
     fastboot flash zip C:\adb\firmware.zip
    Got this:

    Code:
          sending 'zip' (30367 KB)... OKAY [  6.184s]
                     writing 'zip'... INFOzip header checking...
    INFOzip info parsing...
    INFOchecking model ID...
    INFOchecking custom ID...
    INFOstart image[hboot] unzipping for pre-update check...
    INFOstart image[hboot] flushing...
    INFO[RUU]WP,hboot,0
    INFO[RUU]WP,hboot,99
    INFO[RUU]WP,hboot,100
    INFO...... Successful
    FAILED (remote: 90 hboot pre-update! please flush image again immediately)
    finished. total time: 8.090s

    Repeat the same command: !! IMPORTANT !! -- PLEASE WAIT A FEW SECONDS BEFORE ISSUING THE COMMAND AGAIN; Otherwise the cmd prompt will be non-responsive saying "Sending data...", If this happens, try disconnecting the USB cable and reconnect.

    Code:
     fastboot flash zip C:\adb\firmware.zip
    You will see this:

    Code:
          sending 'zip' (30367 KB)... OKAY [  3.277s]
                     writing 'zip'... INFOzip header checking...
    INFOzip info parsing...
    INFOchecking model ID...
    INFOchecking custom ID...
    INFOstart image[adsp] unzipping & flushing...
    INFO[RUU]UZ,adsp,0
    INFO[RUU]UZ,adsp,18
    INFO[RUU]UZ,adsp,30
    INFO[RUU]UZ,adsp,41
    INFO[RUU]UZ,adsp,52
    INFO[RUU]UZ,adsp,64
    INFO[RUU]UZ,adsp,75
    INFO[RUU]UZ,adsp,86
    INFO[RUU]UZ,adsp,97
    INFO[RUU]UZ,adsp,100
    INFO[RUU]WP,adsp,0
    INFO[RUU]WP,adsp,100
    INFO...... Successful
    INFOstart image[cir] unzipping & flushing...
    INFO[RUU]UZ,cir,0
    INFO[RUU]UZ,cir,100
    INFO...... Successful
    INFOstart image[pg2fs_spcustom] unzipping & flushing...
    INFO[RUU]UZ,pg2fs_spcustom,0
    INFO[RUU]UZ,pg2fs_spcustom,31
    INFO[RUU]UZ,pg2fs_spcustom,57
    INFO[RUU]UZ,pg2fs_spcustom,82
    INFO[RUU]UZ,pg2fs_spcustom,100
    INFO...... Successful
    INFOstart image[rpm] unzipping & flushing...
    INFO[RUU]UZ,rpm,0
    INFO[RUU]UZ,rpm,100
    INFO[RUU]WP,rpm,0
    INFO[RUU]WP,rpm,100
    INFO...... Successful
    INFOstart image[sbl1-1] unzipping & flushing...
    INFO[RUU]UZ,sbl1-1,0
    INFO[RUU]UZ,sbl1-1,100
    INFOsignature checking...
    INFOverified fail
    INFO..... Bypassed
    INFOstart image[sbl1-2] unzipping & flushing...
    INFO[RUU]UZ,sbl1-2,0
    INFO[RUU]UZ,sbl1-2,100
    INFOsignature checking...
    INFOverified fail
    INFO..... Bypassed
    INFOstart image[sbl1-3] unzipping & flushing...
    INFO[RUU]UZ,sbl1-3,0
    INFO[RUU]UZ,sbl1-3,100
    INFOsignature checking...
    INFO[RUU]WP,sbl1-3,0
    INFO[RUU]WP,sbl1-3,100
    INFO...... Successful
    INFOstart image[sbl2] unzipping & flushing...
    INFO[RUU]UZ,sbl2,0
    INFO[RUU]UZ,sbl2,100
    INFO[RUU]WP,sbl2,0
    INFO[RUU]WP,sbl2,100
    INFO...... Successful
    INFOstart image[sbl3] unzipping & flushing...
    INFO[RUU]UZ,sbl3,0
    INFO[RUU]UZ,sbl3,100
    INFO[RUU]WP,sbl3,0
    INFO[RUU]WP,sbl3,100
    INFO...... Successful
    INFOstart image[tp] unzipping & flushing...
    INFO[RUU]UZ,tp,0
    INFO[RUU]UZ,tp,100
    INFO..... Bypassed
    INFOstart image[tp] unzipping & flushing...
    INFO[RUU]UZ,tp,0
    INFO[RUU]UZ,tp,100
    INFO...... Successful
    INFOstart image[tz] unzipping & flushing...
    INFO[RUU]UZ,tz,0
    INFO[RUU]UZ,tz,100
    INFO[RUU]WP,tz,0
    INFO[RUU]WP,tz,100
    INFO...... Successful
    INFOstart image[radio] unzipping & flushing...
    INFO[RUU]UZ,radio,0
    INFO[RUU]UZ,radio,6
    INFO[RUU]UZ,radio,11
    INFO[RUU]UZ,radio,17
    INFO[RUU]UZ,radio,23
    INFO[RUU]UZ,radio,28
    INFO[RUU]UZ,radio,34
    INFO[RUU]UZ,radio,40
    INFO[RUU]UZ,radio,46
    INFO[RUU]UZ,radio,52
    INFO[RUU]UZ,radio,59
    INFO[RUU]UZ,radio,69
    INFO[RUU]UZ,radio,75
    INFO[RUU]UZ,radio,81
    INFO[RUU]UZ,radio,87
    INFO[RUU]UZ,radio,92
    INFO[RUU]UZ,radio,99
    INFO[RUU]UZ,radio,100
    INFO[RUU]WP,radio,0
    INFO[RUU]WP,radio,23
    INFO[RUU]WP,radio,46
    INFO[RUU]WP,radio,69
    INFO[RUU]WP,radio,92
    INFO[RUU]WP,radio,100
    INFO...... Successful
    INFOstart image[rcdata] unzipping & flushing...
    INFO[RUU]UZ,rcdata,0
    INFO[RUU]WP,rcdata,0
    INFO...... Successful
    OKAY [ 54.864s]
    finished. total time: 58.143s


    Note:The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.


    Last Step:

    Code:
    fastboot reboot
    Then I went back to the bootloader mode (after the phone reboots successfully):

    If Boot-Loop Occurs*:
    Code:
    fastboot erase cache

    Restart in boot-loader to check whether everything is fine*:
    Code:
    adb reboot bootloader
    --Phone reboots into bootloader--
    Code:
    fastboot getvar all

    The resulting variable may look like this:
    Code:
    INFOversion: 0.5
    INFOversion-bootloader: 1.57.0000
    INFOversion-baseband: 4T.28.3218.04
    INFOversion-cpld: None
    INFOversion-microp: None
    INFOversion-main: 6.06.401.1
    INFOversion-misc: PVT SHIP S-OFF
    INFOserialno: HT34LXXXXXXX
    INFOimei: 
    INFOmeid: 00000000000000
    INFOproduct: m7_ul
    INFOplatform: HBOOT-8064
    INFOmodelid: PN0714000
    INFOcidnum: HTC__001
    INFObattery-status: good
    INFObattery-voltage: 4259mV
    INFOpartition-layout: Generic
    INFOsecurity: off
    INFObuild-mode: SHIP
    INFOboot-mode: FASTBOOT
    INFOcommitno-bootloader: dirty-01dc707e
    INFOhbootpreupdate: 11
    INFOgencheckpt: 0
    all: Done!

    Firmware 5.11.1540.9, NO Red Warning, --md5: -- 6734d095499a72519335bb894503708f

    Firmware 4.19.401.11, NO Red Warning, --md5: -- 8f3a59cdbcc84b9ff2319495eee6ae98

    Firmware 4.19.401.9, NO Red Warning, --md5: -- DE93220BEB19CA1FCB3FDF407F2B3D3F


    Firmware 4.19.401.8, NO Red Warning, --md5: 30772981922e19437085c92adbea9658 --

    Firmware 4.19.1540.4, NO Red Warning, --md5: 49dbb024b28a17383da35593d6cbc860 --



    Firmware 4.06.1540.3, NO Red Warning ** --md5: 227c88abad17dba0561a91ad6d353373 --


    Firmware 4.06.1540.2, NO Red Warning ** --md5: c9b68c6a17ae323112c99ce0550dba38 --

    Previous firmware with modified HBOOT,
    Firmware 3.62.401.1 with NO Red Warning
    are below.

    Firmware 3.62.401.1 for MODEL ID: PN0710000 NO Red Warning --md5: 728e3dc18abde0fd10835376332f81ec --

    Firmware 3.62.401.1 for MODEL ID: PN0711000 NO Red Warning -- md5: 7fb62e47f347ae05baf4dd821b497752 --

    Firmware 3.62.401.1 for MODEL ID: PN0712000 NO Red Warning --md5: 7ab96062ff848550a45dd035967adc83 --

    Firmware 3.62.401.1 for MODEL ID: PN0713000 NO Red Warning -- md5: 6bcb6dd99da4d4c73a24725b814e161b --

    Firmware 3.62.401.1 for MODEL ID: PN0714000 NO Red Warning -- md5: 6b2d5bf151ddf6ebbb7c6303f6db1889 --

    Firmware 3.57.401.500 for MODEL ID: PN0714000

    Firmware 3.57.401.500 for MODEL ID: PN0713000

    Firmware 3.57.401.500 for MODEL ID: PN0712000

    Firmware 3.57.401.500 for MODEL ID: PN0710000


    Firmware 3.22.1540.1 : MODEL ID: PN0710000

    Firmware 2.24.401.1 : MODEL ID: PN0710000 for Android 4.2.2

    FIRMWARE FAQ:


    Q: Do I need S-OFF for firmware flashing?

    A: YES, It is a must.

    Q: Do I need to update my firmware?

    A: NO, but updating firmware ensures optimal phone performance.

    Q: Does it matter when I flash the firmware (before or after new ROM install)

    A: No.

    Q: Will updating the firmware erase my SD card or Apps?

    A: No, The firmware files provided here does not erase none of those.

    Q: If I only flash the ROM, will I get updated to the latest firmware?

    A: No. You must flash the firmware separate in most cases.

    Q: Can I install a UL edition firmware on a U edition phone?

    A: Yes (may be), but you won't have LTE or may experience some other incompatibilities.


    Possible Errors while flashing:
    If it says "FAILED" do not immediately reboot the device. If you reboot with a FAIL it could brick your device! Listed below error are safe to reboot:
    If you encounter one of them, you can just reboot. Nothing changes.
    - 12 signature fail (means a signed firmware package is required. This would only happen with S-ON phones though. but safe to reboot)
    - 23 parsing image fail (means something wrong with the image in the zip)
    - 32 header error (means the zip couldn’t be read and unzipped properly)
    - 41 Wrong Model ID (means the MODEL ID in the android-info.txt does not match with your device. you can reboot the device. You may change the MID manually in the android-info.txt at your own risk.)
    - 42 Wrong Customer ID (means you need to include the CID of your device in the android-info.txt or change the CID to superCID.)
    - 99 UNKOWN (is not yet clear but safe to reboot)

    DON'T reboot until you get a success message if you get an error bellow:
    - 90 hboot pre-update (means it only flashed hboot and you have to run the process again immediately to flash all other partitions. Don’t reboot before repeating the command.
    If the command window stuck in the middle for a long time, wait for a few minutes and please unplug the USB and replug it again. Repeat the command again. DON'T reboot until you get a success message.)


    Editing android-info.txt

    - Use an Editor that doesn't doesn't alter the linebreaks. Don't use Windows Notepad. Use Notepad++
    - Only one MID can be in the file.
    - CID's can easily be added or removed- one per line

    To Get SUPERCID
    Code:
    fastboot oem writecid 11111111

    RUUmode:

    RUU Mode is the mode used for RUU flashes by HTC. It is different from the normal fastboot. You must flash the firmware only in RUU Mode. The RUU mode can be identified by the black background with only a silver HTC logo and if a command is being active a green progress bar will show the progress of any command being excecuted.

    For Further Reading
    Some more useful threads that might be helpful to you:
    - Mike1986’s Firmware thread
    - Vomer’s ultimate guide thread
    - hes_theone64’s radio flash guide for recovery
    - chrisch1974's HOW-TO Flash a custom splash screen
    - Sneakyghost's Firmware Flashing & Hboots red warning gone thread
    - HTC ONE Partition List:
    - Mike1986 Partition explanation:



    You must be aware that writing to the bootloader -partition increases your risk to lose the device exponentially. You understand and agree that i cannot be held responsible for such or any other damages. The flash process is theoretically safe and tested. I will not accept any responsibility. The method itself is developed by Google and HTC, i have only adapted it and you execute it. You understand that you should not do it if you are not willing to accept this risk.

    For More info, about Super CID, S-OFF and Firmware update process, check this thread:

    [Guide] Vomer's Ultimate AIO - S-OFF, SuperCID, Firmware Upgrade & Custom Recovery


    Thanks @vomer and @Sneakyghost
    8
    The new firmware_6.06.401.1_hboot_remove_red_text. Only hboot
    Download here
    MD5: f8a11244a9d0e8e50b090438f762d411
    EDIT: full firmware 6.06.401.1 with text warning remove
    Download here
    MD5: 6923dfd6b53d69f4de0fc4a65d51bc6f
    8
    Please comment and Click Thanks

    Dear All,

    I have noted a lot downloads of the firmware and most of them just don't even bother clicking thanks :silly:

    I appreciate your encouragements and appreciation for my work so that it will give motivation to keep all you updated.

    Thanks a lot for everyone contributed..

    :p
    8
    I have removed "red warning" on new hboot from 4.19.401.11.
    I think there is a red dot left somehow in the end of a text :eek: Saw it while entering recovery
    P.S. This is a fixed one. No kernel and recovery, no red text:
    http://mikanoshi.name/share/fw_4.19.401.11_custom_noredtext.zip
    7
    Attached is the modified hboot for the 3.62.401.1 firmware to remove the red text - tested and working.

    Link to firmware.zip >>> http://darkforest-roms.co.uk/Mods/3.62.401.1/firmware.zip

    MD5 CheckSum of firmware.zip: FE9F2A4DB13AD6CAC9F741D881CA7BA7