Huawei Ascend D1 Quad XL (U9510E) - Update to Jelly Bean 4.1.2

Search This thread
By:
Advanced…
R

redlai

New member
Feb 7, 2015
3
0
sioneng said:
I hope its not a hardware problem. I think you have to go back to stock rom ICS. Download this attachment/zip file. This will help you go back to stock recovery so that you can flash back to stock ICS using 3 button mode.

Do these steps ..
Turn off your phone
-While its off, press and hold the volume down and press the power button to turn it on. Screen should display Huawei logo. (I think they call this mode as fastboot)
-Connect your phone and ran the batch file on your PC.
-If it says successful, you can now download the stock recovery mode from Huawei website and flash it using 3 button mode (volume up, down and power)
Click to expand...
Click to collapse

Thank you very much for your answer sioneng.
I haven't tried it yet because the batch is named as "Cwm-recovery only b610.bat" but the version that I have installed is de B542.
Is there any problem of being different versions?
 
sioneng

sioneng

Senior Member
May 18, 2013
117
19
redlai said:
Thank you very much for your answer sioneng.
I haven't tried it yet because the batch is named as "Cwm-recovery only b610.bat" but the version that I have installed is de B542.
Is there any problem of being different versions?
Click to expand...
Click to collapse

Yes it was intended for b610 roms, patch made by SVikFromOrel. But i did replace the recovery image on that zip file. That should work with your current rom version. :)
 
  • Like
Reactions: redlai
R

redlai

New member
Feb 7, 2015
3
0
sioneng said:
Yes it was intended for b610 roms, patch made by SVikFromOrel. But i did replace the recovery image on that zip file. That should work with your current rom version. :)
Click to expand...
Click to collapse

Thank you for your support but it is not working :(
The Install recovery windows says (see attached picture):
writing recovery... FAILED (remote: flash failure, ErrNo:2)
"CWM installed"
Press any key to continue...
rebooting...

And the phone activity is the same as before, when it is connected to the PC or the electricity, the LED is red and blinking and the screen is always on and with the Huawei logo, and when it is not connected, the phone turns off with an image of "no battery".

Any other solution? Is it totally dead?

Thanks
 

Attachments

  • Error_recovery.JPG
    Error_recovery.JPG
    32.4 KB · Views: 257
A

arzie143

Member
Oct 31, 2012
12
0
Question to Upgrade the Version of D1 quad XL to Lollipop

Pleasant day all of members here in XDA developers..? I want to ask if our phone HUAWEI D1 QUAD XL have been upgrade to lollipop version...? i search internet then i saw some site that HUAWEI D1 QUAD XL has upgraded to lollipop version..? there is a xda developers include the site..? here the site: http://www.lollipop-rom.org/mp3-0/huawei-ascend-d-quad-xl-4569.html... if this true i so much appreciate it to help me to upgrade my phone to lollipop version ... thanks a lot...:good::good:
 
O

opap

New member
Feb 26, 2015
1
0
arzie143 said:
Pleasant day all of members here in XDA developers..? I want to ask if our phone HUAWEI D1 QUAD XL have been upgrade to lollipop version...? i search internet then i saw some site that HUAWEI D1 QUAD XL has upgraded to lollipop version..? there is a xda developers include the site..? here the site: ... if this true i so much appreciate it to help me to upgrade my phone to lollipop version ... thanks a lot...:good::good:
Click to expand...
Click to collapse

What is this???? make surveys to get the roms? Are you kidding us???
 
Cocagy

Cocagy

Senior Member
Sep 20, 2012
98
13
How can i install B611 by svikfromore or B802 ?

I already running B551

When i try to install B611 it faild and nothing done

When its saying waiting for device , mobile get restart into fast boot but in cmd screen something happened in just 1 second then its saying finished , please some one tell me where the problem ?
 
Last edited:
E

elidroid

Member
Jan 4, 2012
5
3
Huawei Ascend D1 quad XL stuck on ascend logo [solved]

this is how I solved the problem with my device
otroblogahi.blogspot.com/2015/08/huawei-ascend-d1-quad-xl-stuck-on.html

spanish version

otroblogahi.blogspot.com/2014/01/huawei-se-queda-en-la-pantalla-de.html
 
  • Like
Reactions: prazetyo
prazetyo

prazetyo

Senior Member
Sep 5, 2012
61
12
Surabaya
agungprasetyo.net
melanjae02 said:
What version of Android are you using mate?
Click to expand...
Click to collapse
I think ICS.
-----------------
I think method from @elidroid almost same like eslamhero method, only with different tools. Finally I can back to my stock rom using eslamhero method with Official ROM B121, and then upgrade firmware to B610 for English CWM.

I feel the user interface of B610 is more attractive than B124 (original stock rom) or B121. IMHO :good:
 
H

heheruru

New member
Aug 14, 2015
1
0
Brick, cannot boot to recovery

Hello all,

Need help here..

I brick my huawei U9510E after trying upgrading to JB. Current condition, blank screen, can hear first half sec of boot sound.

Another problem is the volume up button is broken, so I cannot go to recovery using power + volume up combination. I still can go to bootloader (power + volume down), but don't know what to do there.

ADB can't detect my phone in normal boot (brick mode), but fastboot can detect my phone in bootloader.

Is there any solution without using combination of volume up button?

Thanks.

Regards
 
E

eslamhero

Member
Nov 27, 2013
6
2
heheruru said:
Hello all,

Need help here..

I brick my huawei U9510E after trying upgrading to JB. Current condition, blank screen, can hear first half sec of boot sound.

Another problem is the volume up button is broken, so I cannot go to recovery using power + volume up combination. I still can go to bootloader (power + volume down), but don't know what to do there.

ADB can't detect my phone in normal boot (brick mode), but fastboot can detect my phone in bootloader.

Is there any solution without using combination of volume up button?

Thanks.

Regards
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=56651035#post56651035
 
jasonquejr

jasonquejr

Member
Feb 20, 2014
48
19
Manila
I know this mobile phone is quite old. But i need help on my sisters mobile phone (Huawei Ascend D1 Quad XL U9510e).
She was having problems uploading pictures in Instagram so i reflashed it with custom rom.
The problem was i lost the mobile connection on it. I tried flashing bunch of ROM's but was not able to bring it back.
And also, the SD Card slot is defective. It can't detect any card i tried. So i rely heavily on flashing thru Fastboot.
Any thoughts? @simonfzhao @eslamhero @12andy @SVikFromOrel @PupsikOFF
 
You must log in or register to reply here.

Similar threads

D
Everything Huawei Y550 - Root/CWM/TWRP
Replies
7K
Views
1M
B
Blank tape
JMailuhu
[Q] Huawei Ascend G630 Root & Roms
Replies
355
Views
344K
haroldddd
haroldddd
Droidriven
  • Sticky
  • Poll
[Ask Any Question][Newbie Friendly]
Replies
32K
Views
2M
M
maybeme2
YuriCPS
Huawei Ascend G600 (U8950D) Help Thread (ROMs, Mods etc.)
Replies
959
Views
330K
S
stark.czar
T
Alcatel one touch fierce xl 5054n
Replies
1K
Views
267K
D
D34THR0W

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 20
    S
    simonfzhao
    Hello Everyone,

    Below is a tutorial I have compiled and translated from bbs.anzhi.com on how to update your Huawei Ascend D1 Quad XL (U9510E) to the latest version of Android offered by EmotionUI, Jelly Bean 4.1.2:

    First of all, I want to give credit where credit is due:
    genokolar (aka G大) - Creator/Modder of the Custom Recovery for this, and many other phones coming out of China
    Ry09iu (aka R大) - Creator of a Rooted ROM based on EmotionUI B534, which is based on Android 4.1.2
    【LUV】 - The board moderator for the D1Quad section of bbs.anzhi, also who's ROM release I used for my phone, but it's upto you to choose which one you want to use

    **IT IS NOT RECOMMENDED FOR YOU TO ATTEMPT THIS IF YOU DO NOT HAVE A PREVIOUS EXPERIENCE WITH FLASHING PHONES. IN THE CHANCE THAT YOU BRICK YOUR PHONE, I CANNOT BE HELD RESPONSIBLE FOR IT**

    **DON'T FORGET TO BACKUP YOUR FILES!!**

    Now that the credits and the warning are given, let's get started:

    Required Tools:
    1. Recovery 6.0.1.9: This tool will open in command prompt and will allow you to flash in the Custom Recovery created by genokolar, as well as the stock recovery released by Huawei. Mirror


    2(a).Official ROMs:

    i. Official EmotionUI ROM B551 (Updated January 11, 2013): Release Notes​

    2(b).Custom ROMs:

    i. Rooted Version of EmotionUI Rom (Author: genokolar):
    - B534 Download​

    ii. Rooted Version of EmotionUI Rom (Author: Ry09iu):
    - B534 Download
    - B538 Download​

    iii. Rooted Version of EmotionUI Rom with HOLO as default Launcher (Author: Ry09iu, Modded by LUV):
    - B534 Download
    - B538 Download
    - B542 Download​

    iv. MIUI V4.1 - converted from MIUI V4.1 for Honor 2 (Author: Ry09iu):

    ​

    3. GApps [Jelly Bean 4.1.2 (Author goo.im/gapps)]: Download

    *The roms are hosted in China so the download will be slow, please be patient and your download will be done in an hour or two :)*

    **PLEASE PLACE THE ROM YOU WISH TO UES INTO YOUR EXTERNAL SD CARD BEFORE CONTINUING**

    Step 1: Flashing Custom Recovery
    1. Turn-on USB debugging on your phone [Settings -> Developer Settings -> USB debugging]
    2. Plug in your Phone to your computer via USB for it to install the appropriate drivers*
    3. Run recovery6.0.1.4_AscendD1Q.exe
    3.5 If your system locale is set to anything other than Chinese, you will get this:
    13537413.png

    But what you should see is this:
    grecovery.png

    What that means is: said:
    **-1. Flash Chinese Custom Recovery-**
    **-2. Recover Official Recovery-**
    ##-3.Reboot phone into Recovery-##
    Click to expand...
    Click to collapse
    4. Type in "1" and press Enter -> This Recovery Flasher will do what it's made to do and when it's completed, your phone will now have a custom recovery.
    5. The application will automatically close 10 seconds after the Recovery has been successfully flashed.

    Note from Genokolar said:
    1. The development of this Custom Recovery was done through email with Huawei so it may be lacking certain features, a full custom recovery will be released as soon as responds him
    2. This recovery will only flash from an external SD Card, internal SD card flash is not yet supported
    3. At the time of this Custom Recovery being posted, no third-party ROM has been released, therefore it has not been tested <- No longer the case
    4.This recovery can be used to Root the EMUI ROMs released by Huawei
    5. When you need to flash back to the original ROM releases by Huawei, or receive OTA updates from Huawei, please flash back the original Recovery
    Click to expand...
    Click to collapse

    *If the drivers do not install properly, please download the driver attached in this post and install it manually.

    Step 2: ROM Flashing
    1. Boot your phone into the new recovery. (either by starting the application again and selecting option 3, or press and hold the Power Button with Volumn Up)
    2. You will be greeted by the Custom Recovery Screen show below:
    recoveryo.jpg

    [*] Reboot system now

    [*] Select zip to flash/install

    [*] Wipe data

    [*] Wipe cache

    [*] Backup and restore

    [*] Flash memory/Format

    [*] Advanced setting

    [*] Turn off phone
    Click to expand...
    Click to collapse
    3. Scroll to select option 3 (Wipe data), confirm the wipe
    4. Scroll to select option 4 (Wipe cache), confirm the wipe as well
    5. Scroll to select option 2 (Select zip to flash/install)
    applyupdatefromsdcard.jpg

    [*] Select zip from SD Card to Flash

    [*] Install /sdcard/update.zip

    [*] Activate/Deactivate Signature Verification

    [*] Install from external zip
    <-- Back to previous screen
    Click to expand...
    Click to collapse
    6. Scroll to and select option 4 (Install from external zip)
    7. Scroll to and select the zip file of the ROM which you have previously downloaded and placed into your external SD Card, confirm the flash
    7.5. At this point, you can either flash in the gapps right away, or flash it after rebooting into the OS. I chose to flash it after booting into the OS for the first, but I don't think it will cause any problems. I will be posting the way I did it, and if you guys did it the other way, let us know if it worked or not

    *IMPORTANT NOTE*
    When you're booting up your system out from Recovery, you will be asked whether or not you would want your ROM to auto update the recovery, shown below:
    updaterecovery.jpg

    [*] Yes - Forbid Auto Update of Recovery

    [*] Cancel - Back
    <-- Return to previous
    Click to expand...
    Click to collapse
    Please select the one being highlighted in the image, which is option 2 ([*] Cancel - Back). OR CONSEQUENCES WILL NEVER BE THE SAME!

    Step 3: Flashing GApps
    1. Boot into recovery
    2. Scroll to and select option 4 (Install from external zip)
    3. Scroll to and select the zip file of GApps you have downloaded "gapps-jb-20121011-signed.zip" or whatever you may have renamed it to, confirm the flash
    4. Reboot into OS
    5. *THE NOTE ABOVE STILL APPLIES, SO HERE IT IS AGAIN*
    *IMPORTANT NOTE*
    When you're booting up your system out from Recovery, you will be asked whether or not you would want your ROM to auto update the recovery, shown below:
    updaterecovery.jpg

    [*] Yes - Forbid Auto Update of Recovery

    [*] Cancel - Back
    <-- Return to previous
    Click to expand...
    Click to collapse
    Please select the one being highlighted in the image, which is option 2 ([*] Cancel - Back). OR CONSEQUENCES WILL NEVER BE THE SAME!
    Click to expand...
    Click to collapse

    Step 4: ALL DONE!
    Congratulations, assuming everything was done properly, and everything worked out, now you will have Android 4.1.2 on your Huawei Ascend D1 Quad XL.

    Images not showing up in your GooglePlay Store? YouTube not working?
    Here is how our very own 12andy fixed the problem:

    12andy said:
    UPDATE: So using a clear hosts breaks the ability to connect to Facebook (via app and website). It's best to use AdAway, instead.

    Nvana, it's the same process we've been using to flash the Chinese ROM(s), but with the added step of "fixing" the hosts file:
    • download SmartHosts from Goole Play (free)
    • tap on "Toggle hosts file" button
    • select "Clean hosts file"

    And you're done! Rebooting wasn't necessary either, as the images started loading immediately.
    Click to expand...
    Click to collapse
    View
    11
    SVikFromOrel
    SVikFromOrel
    [ Custom ROM ] U9510E B611 by svikfromorel v3.0​

    Base - B611 official
    Model - U9510E/U9510
    ROM makers - SvikFromOrel feat. PupsikOFF

    Update log
    • Root
    • Root Explorer
    • Google App
    • HwLauncher6.apk - 4х5,
    • HwMeWidget.apk - separate
    • Phone.apk - fullscreen
    • Breeze.hwt, Onion.hwt - 2 themes & some ringtones
    • Chrome and Gmail (not part of the standard gapps),
    • Titanium BackUp,
    • Bootanimation.zip - my standart boot anim.
    • Build.prop edit: mode Н+ (3,75G)
    • removed some Chinese programs
    • repack cust.img for Euro location

    How to install ROM
    • download ROM and unzip on PC
    • charge more 30%
    • backup your data
    • connect phone to PC
    • run Flash_all_en.bat
    • when the process is finished and the phone reboots, hold the volume button up and the power button
    • in recovery menu choose Wipe data --> Yes then Wipe cache and Reboot

    DOWNLOAD
    View
    8
    SVikFromOrel
    SVikFromOrel
    CWM

    who wants to see the English version of CWM??
    One Russian guy has created a patch. His name is PupsikOFF.
    link on 4PDA post
    1. Copy the attached file to your SD card
    2. launch Chinese recovery
    3. Scroll to select option 2
    4. Then Scroll to select option 4
    5. Find on your SD card recovery_patch.zip
    6. That's all.
    But there is one drawback..
    After the restart, recovery will again become a Chinese.
    it's better than nothing

    View attachment recovery_patch.zip
    View
    7
    SVikFromOrel
    SVikFromOrel
    Attention!! New ROM!!

    [ Custom ROM ] Huawei U9510E P6_EMUI_2.0_for_U9510E_PupsikOFF_port

    Base - P6-U00_EmotionUI_2.0_V100R001C00B030SP1
    Model - U9510E/U9510
    Port Maker - PupsikOFF
    Update Log
    - wi-fi fix
    - KingUser fix
    - replace stock browser to NextBrowser
    - add GoFlashLight app
    - long press Home (hard) button fix
    - add Google Apps, LG lockscreen
    - and more fix
    - video files play with Huawei Video player

    Still not fixed
    - FM radio
    - youtube (but you can download Photon Browser from Play Market for view flash video)

    How to install ROM
    - Flash this port after install official B610 or B611
    - download ROM and unzip on PC
    - charge more 30%
    - backup your data
    - connect phone to PC
    - run Sec_P6.bat
    - when the process is finished and the phone reboots, hold the volume button up and the power button
    - in recovery menu choose Wipe data --> Yes then Wipe cache and Reboot

    Enjoy real EMUI 2.0.

    DOWNLOAD

    Screenshot_2014-02-23-18-41-02.jpgScreenshot_2014-02-23-18-42-04.jpgScreenshot_2014-02-23-18-42-11.jpgScreenshot_2014-02-23-18-42-36.jpegScreenshot_2014-02-23-18-42-44.jpegScreenshot_2014-02-23-18-42-53.jpegScreenshot_2014-02-23-18-43-57.jpgScreenshot_2014-02-23-18-44-19.jpgScreenshot_2014-02-23-18-45-04.jpegScreenshot_2014-02-23-18-46-18.jpg
    Respect from Russia​
    View
    7
    SVikFromOrel
    SVikFromOrel
    cloudlockhart said:
    Alryt.. tnx..

    Wow.. real emui 2.0. Im excited! :)

    Sent from my HUAWEI U9510E using XDA Premium 4 mobile app
    Click to expand...
    Click to collapse

    Hi guys! Yeah, I realy install a EMUI 2.0 test ROM from P6 with 4.2 Android, but find some bags... Wi-fi not work and dial up have some errors.. I will try to fix them all.
    View

New posts