Huawei Ascend G6 4G L-11 INSTANT BOOTLODER UNLOCK

[Diogo Glória]

Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly

Here are the steps:

1. Download the last DC Unlocker Software

2. Install ADB drivers or Hisuite ( search forum )

3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".

4. Connect Phone to usb and open DC UNLOCKER

5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect


6. Click on the magnifing glass and wait for detection

7. Voilá, the bootloader code appears in the BOX

8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )

9. Put the code generated by DC UNLOCKER in The field and click unlock

10. TADAAAAAAAA Unlocked Instantly

Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:

 

[bugggmenot]

Not working for me:

DC - Unlocker 2 Client 1.00.1201

Detecting modem :

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Found Applications port COM5
Found Diagnostics port COM4

Found USB interface {3F966BD9-FA04-4EC5-991C-D326973B5128}

Found modem : HUAWEI G6-L11
IMEI : 864037024395912
Firmware : 8226C00B109
SIM Lock status : unknown(read failed)


modem not found !

 

[persona78]

Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly

Here are the steps:

1. Download the last DC Unlocker Software

2. Install ADB drivers or Hisuite ( search forum )

3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".

4. Connect Phone to usb and open DC UNLOCKER

5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect


6. Click on the magnifing glass and wait for detection

7. Voilá, the bootloader code appears in the BOX

8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )

9. Put the code generated by DC UNLOCKER in The field and click unlock

10. TADAAAAAAAA Unlocked Instantly

Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:

What phone model do you have???? Dont work in L11 LTE ...

 

[Diogo Glória]

I have the l11 4G LTE

Dont foget to enable manufacturer mode, it is necessary for qualcom phones
and make sure that you have the correct drivers

 

[Diogo Glória]

Not working for me:

That is because you have modem in the field, you must select HUAWEI PHONE and not HUAWEI MODEM, hope it helps

 

[persona78]

Hi! I have the drivers, I try with debug mode on and off, I change the connection in engineering menu like you say, try all the usb types and nothing....

 

[Diogo Glória]

Hi! I have the drivers, I try with debug mode on and off, I change the connection in engineering menu like you say, try all the usb types and nothing....

What error dc unlocker shows?

 

[Davidel11]

Thanks!!

 

[persona78]

What error dc unlocker shows?

no device.
but i think i need to reboot the phone when i choose Manufacturer mode, i dont try yet....

Do you have done any reboots?

 

[Anghami]

Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly

Here are the steps:

1. Download the last DC Unlocker Software

2. Install ADB drivers or Hisuite ( search forum )

3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".

4. Connect Phone to usb and open DC UNLOCKER

5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect


6. Click on the magnifing glass and wait for detection

7. Voilá, the bootloader code appears in the BOX

8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )

9. Put the code generated by DC UNLOCKER in The field and click unlock

10. TADAAAAAAAA Unlocked Instantly

Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:

When i open DC unlocker the Ports Section is always blank any solution?

 

[persona78]

Tutorial in next post works.

 

[persona78]

#HuaweiBootloaderUnlock

Hi! To Unlock the bootloader, first try this site, but if you don´t have you need to create a account ( free ):
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail

Insert your data like this example for U10:
http://postimg.org/image/6kddvoboj/
U10-G6, huawei G6-U10, etc..., DON´T WORK! Insert it like image shows.

Example for L11 model:
http://postimg.org/image/wha6ixm85/
Be sure from the data you are inserting...

If the Huawei site don´t work than try the next tutorial...

About the DC - Unlocker client and how to get the bootloader code.

It WORKS and i found how it works.

Here are the steps:

1. Need a internet connection and don´t use a proxy server, download DC-Unlocker but only this version works, install it and reboot :
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201

2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE

3. Install ADB drivers with Hisuite ( best way ):
http://consumer.huawei.com/minisite/HiSuite_en/
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!

4.With the phone >>>> UNPLUGED<<<<:
Enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode"
"CORFIRME"

5. Connect the Phone to usb, check if PC is installing the phone, wait to finish to install it. It will pop up a window in phone to choose connection, DON´T DO ANY THING, let it be like it is, in charge mode.

6. Execute, OPEN DC- UNLOCKER FOLDER A EXECUTE THE EXE FILE WITH ADMINISTRATIVE PRIVILEGES, DC UNLOCKER and Select Huawei Phones in manufacturer and leave the model in Auto detect

7. Click on the magnifing glass and wait for detection. Ignore any advise that you are using a old version of dc-unlocker, in new version to use this option you need to pay.

8. You will see the bootloader code appears in the BOX bellow.

9. Use this software and the unlock bootloader option, 18 option:
https://mega.nz/#!WgoVWLjQ

Key:
!YV1JLOGvXX4rvYreDXP1Twwh-V5O65NjmMxBH_7unUI

Read this- BOOTLOADER Unlocking-Relocking Procedure:
https://www.facebook.com/download/1560613864260023/BOOTLOADER Unlocking-Relocking Procedure.docx

If still don´t work, go here:
https://www.facebook.com/groups/huawei.g6.development/permalink/457458214413436/

 

[jjjuuann]

Hi, thanks for this tutorial. I have followed these steps:

Hi!
This is how i made it:

Here are the steps:

1. Download DC-Unlocker but only this version works, install it and reboot :

2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE

3. Install ADB drivers with Hisuite ( best way ):
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!

4. It need to enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode" (IF OPEN THE MENU TO CHOOSE THE USB CONNECTION PRESS RETURN TO GO BACK TO CONFIRME)
"CORFIRME"
And Reboot the phone,.

5. Connect Phone to usb (MY DEBUG MODE WAS ON AND USB FLASH DRIVE WAS SELECTED) and open DC UNLOCKER.

6. Select Huawei Phones in manufacturer and leave the model Auto detect

7. Click on the magnifing glass and wait for detection

8. You will see the bootloader code appears in the BOX bellow.

In step 8, I get some information about my phone but the bootloader code is not there. All the information I get is the following:

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Applications port COM5
Found Diagnostics port COM7

Found Phone : HUAWEIG6-L11
Model : Huawei Qualcomm Android phone
IMEI : XXXXXXXXXXXXXXX
Serial NR. : T7L7N1XXXXXXXXXX
Firmware : MSM8226C00B119_AMSS Sep 15 201410:04:11
Hardware ver. : HL1G6L22M
Wi-Fi MAC : XX:XX:XX:XX:XX:XX
BlueTooth MAC : XX:XX:XX:XX:XX:XX
SIM Lock status : unlocked

I suppose that the bootloader unlock code should be there but it is not. Is it possible that this method doesn't work for my phone? Or have I done something wrong?
Thanks for your help.

 

[persona78]

Hi, thanks for this tutorial. I have followed these steps:


In step 8, I get some information about my phone but the bootloader code is not there. All the information I get is the following:

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Applications port COM5
Found Diagnostics port COM7

Found Phone : HUAWEIG6-L11
Model : Huawei Qualcomm Android phone
IMEI : XXXXXXXXXXXXXXX
Serial NR. : T7L7N1XXXXXXXXXX
Firmware : MSM8226C00B119_AMSS Sep 15 201410:04:11
Hardware ver. : HL1G6L22M
Wi-Fi MAC : XX:XX:XX:XX:XX:XX
BlueTooth MAC : XX:XX:XX:XX:XX:XX
SIM Lock status : unlocked

I suppose that the bootloader unlock code should be there but it is not. Is it possible that this method doesn't work for my phone? Or have I done something wrong?
Thanks for your help.

Your DC-Unlocker is this version V1_00_1201????? Only this one shows the code, the new versions dont!
The link i post is for V1_00_1201 version, the only one that works on G6!
-----
F...k the download link for that version is not there any more.... I think i have it, i will upload and post it!
--------------
This is the right version

https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201

 

[jjjuuann]

Your DC-Unlocker is this version V1_00_1201????? Only this one shows the code, the new versions dont!
The link i post is for V1_00_1201 version, the only one that works on G6!
-----
F...k the download link for that version is not there any more.... I think i have it, i will upload and post it!
--------------
This is the right version

DC-unlocker-client-software-V1_00_1201

As you said, the problem was the version of DC-Unlocker (I was trying with version 1.00.1214).
I finally got my bootloader code with version 1.00.1201
Thank you very much for your help!!!

 

[persona78]

The new versions have that option to but need to activate the paid version... to many downloads made a opportunity for the creator, I think.

 

[bugggmenot]

WOW finally it worked!! Tnx persona :X
notice that after installing HiSuit and ADB drivers, you need to recheck "Manufacturer mode" again. that was the part that took a lot of time for me to realize. even no restart needed!!
I had "Debug mode" on , Mass Storage and used DC Unlocker V1_00_1201 .
it seems DC Unlocker gets BL code frome a server, so make sure your anti virus allows DC Unlocker to connect.

 

[sleo38]

Hi personna78
It doesn't work with my device.
I use dc-unlocker v1.00.1201
I use debug mode and usb flash drive
I use manufacturer mode
I get this answer:
Found phone : huawei g6-l11
IMEI : xxxx xxxx
Firmware : g6-l11v100r001c900b370

Device may be in wrote mode

Can you help me ?

 

[persona78]

Hi personna78
It doesn't work with my device.
I use dc-unlocker v1.00.1201
I use debug mode and usb flash drive
I use manufacturer mode
I get this answer:
Found phone : huawei g6-l11
IMEI : xxxx xxxx
Firmware : g6-l11v100r001c900b370

Device may be in wrote mode

Can you help me ?

Hmmmm, when you change to manufacture mode, confirm and don't reboot try dc unlocker than.

 

[sleo38]

Hmmmm, when you change to manufacture mode, confirm and don't reboot try dc unlocker than.

Hi personna78
OK, it is work non. Thank a lot