Huawei Ascend G6 Unbricking software

[Sashko98]

This program is used for restoring of broken smartphones based on Qualcomm.
Do not use it unnecessarily!

Install Driver ! Huawei Q Pack Driver 2.0

Huawei Qualcomm Platform Bootloader&Fastboot Multi-Download 1.0.0.2 - Download

G6 series
Huawei G6-C00 Android 4.3 EMUI 1.6 - Download
Huawei G6-U10 Android 4.3 EMUI 1.6 - Download
Huawei G6-U00 Android 4.3 EMUI 2.0 - Download



All credits goes to @ROM-HUAWEI for the original topic which was sadly locked.

 

[zanyarzz]

hi

after 40% fail

help me

thnx
http://www.4shared.com/photo/rEAkPM58ce/Capture.html?

 

[zanyarzz]

hi

after 40% fail

help me

thnx
http://www.4shared.com/photo/rEAkPM58ce/Capture.html?

no body ?

i need repire boot g6-u00

i try the solution
no answer

thnx

 

[no2ba]

I get : Download fastboot fail
I wouldn't start!

Any help?

 

[aman149]

I have install custom rom 146 in huawei g6 but now i am facing problem in network

 

[inno b mc]

is there one for g6-l11 firmware that can be flashed using qualcom flash tool? mine is hard bricked

 

[michael234asd]

is there one for g6-l11 firmware that can be flashed using qualcom flash tool? mine is hard bricked

I found a firmware in stock rom. You need to unpack update.apk and go to /etc/firmware/ folder.

 

[facebook.com]

This program is used for restoring of broken smartphones based on Qualcomm.
Do not use it unnecessarily!

Install Driver ! Huawei Q Pack Driver 2.0

Huawei Qualcomm Platform Bootloader&Fastboot Multi-Download 1.0.0.2 - Download

G6 series
Huawei G6-C00 Android 4.3 EMUI 1.6 - Download
Huawei G6-U10 Android 4.3 EMUI 1.6 - Download
Huawei G6-U00 Android 4.3 EMUI 2.0 - Download



All credits goes to @ROM-HUAWEI for the original topic which was sadly locked.

Hello,

This Multi-Download tool worked with U9202-1 Qualcomm Bricked Device.

I was Stuck on Huawei U9202-1 Qualcomm bricked. When i got it and reprocess it by myself phone become Huawei Logo.
After Reflash phone with Suitable rom.

You can Added on Thread on first page that Huawei U9202-1 Can be recover from Qualcomm brick!

Best Regards,
Shamim

 

[rakovm]

For hardbricked devices like mine that is only recognized as Quallcomm 9008 or 9006 there is no fix. This method is going only to 40% and then there is an error.

 

[MrMojoRisin89]

can anyone post a little guide for this procedure? thanks

 

[datdotdit]

can anyone post a little guide for this procedure? thanks

icant say it is a guide but, what i did and info about phone (G6-U10, battery 0%):
phone doesnt turn on, when connected to charger red led blinks for a short time, when connected to USB (computer) it appears as "Qualcomm HS-USB QDLoader 9008"

downloaded driver, tool and firmware files above
run Huawei Qualcomm Platform Bootloader&Fastboot Multi-Download 1.0.0.2 (QPBLFBML01.exe)
choose manufacture, select file (EXE\*.xml), set password (just next), scan&download
after bootloader (40%) i thought it failed (i think after 40% you must wait a minute though i didnt)
disconnect then reconnect the phone after 15-20 secs or so phone connected in fastboot mode
stop then re-run scan&download
when it finishes, restart the phone, huawei logo and then recovery mode (saying factory with droidbot)
at this point i was in a hurry so didnt wait for more, copied SD (dload folder) to a sdcard, put in the card, restart phone while pressing volume down
checking sdcard, checking update file, writing update file etc
restarted with factory firmware, now it is charging, i will try to update-flash proper firmware

can say this works so far, thx alot for sharing (@Sashko98)
sorry for weird english, but you will get the idea i think

 

[MrMojoRisin89]

icant say it is a guide but, what i did and info about phone (G6-U10, battery 0%):
phone doesnt turn on, when connected to charger red led blinks for a short time, when connected to USB (computer) it appears as "Qualcomm HS-USB QDLoader 9008"

downloaded driver, tool and firmware files above
run Huawei Qualcomm Platform Bootloader&Fastboot Multi-Download 1.0.0.2 (QPBLFBML01.exe)
choose manufacture, select file (EXE\*.xml), set password (just next), scan&download
after bootloader (40%) i thought it failed (i think after 40% you must wait a minute though i didnt)
disconnect then reconnect the phone after 15-20 secs or so phone connected in fastboot mode
stop then re-run scan&download
when it finishes, restart the phone, huawei logo and then recovery mode (saying factory with droidbot)
at this point i was in a hurry so didnt wait for more, copied SD (dload folder) to a sdcard, put in the card, restart phone while pressing volume down
checking sdcard, checking update file, writing update file etc
restarted with factory firmware, now it is charging, i will try to update-flash proper firmware

can say this works so far, thx alot for sharing (@Sashko98)
sorry for weird english, but you will get the idea i think

how enter in fastboot mode?
i have huawei g6-u10

 

[dany0808]

Hello,

This Multi-Download tool worked with U9202-1 Qualcomm Revive Device.

I was Stuck on Huawei U9202-1 Qualcomm bricked. When i got it and reprocess it by myself phone become Huawei Logo.
After Reflash phone with Suitable rom.

You can Added on Thread on first page that Huawei U9202-1 Can be recover from Qualcomm brick!

Best Regards,
Shamim

Hi
I have a U9202-1 , can you please tell me the steps that you used? which .xml ?

 

[facebook.com]

Hi
I have a U9202-1 , can you please tell me the steps that you used? which .xml ?

qualcomm.xml

 

[mavi12]

hy guys
plez hellp me ** i am sory for my english**
i flashed my g6-u10 with g6-c00 rom! its terned on and rom is wotking but now i have not sim network acsess
phone hase imei and serial number its not null!
now i want to reflash g6-u10 stock rom by dload but its say erorr in recovery diuring flash the rom
i tryed to unlock my bootloader but huwavei dosnt give me bootloader unlock code
what i can to do now?
if ther is a solotion pliz help me
tank you

 

[biggreenmango]

icant say it is a guide but, what i did and info about phone (G6-U10, battery 0%):
phone doesnt turn on, when connected to charger red led blinks for a short time, when connected to USB (computer) it appears as "Qualcomm HS-USB QDLoader 9008"

downloaded driver, tool and firmware files above
run Huawei Qualcomm Platform Bootloader&Fastboot Multi-Download 1.0.0.2 (QPBLFBML01.exe)
choose manufacture, select file (EXE\*.xml), set password (just next), scan&download
after bootloader (40%) i thought it failed (i think after 40% you must wait a minute though i didnt)
disconnect then reconnect the phone after 15-20 secs or so phone connected in fastboot mode
stop then re-run scan&download
when it finishes, restart the phone, huawei logo and then recovery mode (saying factory with droidbot)
at this point i was in a hurry so didnt wait for more, copied SD (dload folder) to a sdcard, put in the card, restart phone while pressing volume down
checking sdcard, checking update file, writing update file etc
restarted with factory firmware, now it is charging, i will try to update-flash proper firmware

can say this works so far, thx alot for sharing (@Sashko98)
sorry for weird english, but you will get the idea i think

In my case it shows "status fail: fastboot download failed" when i clicked on scan and download