Huawei Honor 3C H30-U10 is dead?

vicfurpac

Member
Aug 7, 2016
7
0
0
Hi. I think I killed my Huawei Honor 3C H30-U10 chinese version. I succesfuly had upgraded it to MUI 3.0 and latest Chinese FW, but then I tried to upgrade to anothr FW version european all ok, then I didn't like it and tried to downgrade to original Chinese FW but wanted to maintain EMUI 3.0. Now it doesn't vibrate anymore nor is recognized by USB. The only thing that I notice is when I plug the USB, A red light blinks once for just a short period less than a second right next to where the front camera is. Phone has no life. Tried everything I know to ressusitate the phone and it won't turn on, won't vibrate, and is not recognised by USB. Question is: Is it recoverable and if so, what should I do? Thanks in advance.
 
Last edited:

issux

Member
Aug 20, 2010
28
17
0
www.fernandezsansalvador.es
Hi. I think I killed my Huawei Honor 3C H30-U10 chinese version. I succesfuly had upgraded it to MUI 3.0 and latest Chinese FW, but then I tried to upgrade to anothr FW version european all ok, then I didn't like it and tried to downgrade to original Chinese FW but wanted to maintain EMUI 3.0. Now it doesn't vibrate anymore nor is recognized by USB. The only thing that I notice is when I plug the USB, A red light blinks once for just a short period less than a second right next to where the front camera is. Phone has no life. Tried everything I know to ressusitate the phone and it won't turn on, won't vibrate, and is not recognised by USB. Question is: Is it recoverable and if so, what should I do? Thanks in advance.
Hello,

try to charge battery to 100%. You can try a wall charger, so the phone did not use it while charging.
 

vicfurpac

Member
Aug 7, 2016
7
0
0
Hello,

try to charge battery to 100%. You can try a wall charger, so the phone did not use it while charging.
Hi, and thanks for your reply.

When you say a wall charger, you mean charging it via other way than using the phone itself? Because it doesn't show any sign of life other than the short red led blink next to the front camera and won't turn on. Therefore don't know if it's charging or not.
Before this issue it would vibrate if plugged to charger or pc, but after what I did mentioned on first post, it does nothing.

I could try to charge the battery directly connecting 5v DC to the battery's positive and negative pads, but it could be dangerous as it could over charge and blow as I would have no way to tell if battery is 100% full.

Any comments / suggestions are welcome.
Thanks.
 

kernel.killer

Senior Member
May 22, 2015
298
265
0
Hi, and thanks for your reply.

When you say a wall charger, you mean charging it via other way than using the phone itself? Because it doesn't show any sign of life other than the short red led blink next to the front camera and won't turn on. Therefore don't know if it's charging or not.
Before this issue it would vibrate if plugged to charger or pc, but after what I did mentioned on first post, it does nothing.

I could try to charge the battery directly connecting 5v DC to the battery's positive and negative pads, but it could be dangerous as it could over charge and blow as I would have no way to tell if battery is 100% full.

Any comments / suggestions are welcome.
Thanks.
Just try connecting the phone to charger and let it sit there for some time IF THE PHONE VIBRATES WHEN CONNECTED TO PC WITHOUT BATTERY. If it does so, you may try to flash bootimg with stock / last good known kernel.

Btw. The battery is charging using 4.11V DO NOT TRY 5V!!
 
Last edited:

vicfurpac

Member
Aug 7, 2016
7
0
0
Just try connecting the phone to charger and let it sit there for some time IF THE PHONE VIBRATES WHEN CONNECTED TO PC WITHOUT BATTERY. If it does so, you may try to flash bootimg with stock / last good known kernel.
Thanks for reply, but phone used to vibrate before I tried to upgrade it. Now it just does nothing, just a simple quick red led flash near the front camera.
Will try to leave phone on charger overnight and see if it vibrates again or not.
 

PalakMi

Senior Member
Aug 18, 2016
5,131
652
113
Oujda
Thanks for reply, but phone used to vibrate before I tried to upgrade it. Now it just does nothing, just a simple quick red led flash near the front camera.
Will try to leave phone on charger overnight and see if it vibrates again or not.
The led means your phone is still alive, cjarge it and see what happens
 

hassanjavaid8181

Senior Member
Jan 9, 2016
3,029
1,226
113
Hi. I think I killed my Huawei Honor 3C H30-U10 chinese version. I succesfuly had upgraded it to MUI 3.0 and latest Chinese FW, but then I tried to upgrade to anothr FW version european all ok, then I didn't like it and tried to downgrade to original Chinese FW but wanted to maintain EMUI 3.0. Now it doesn't vibrate anymore nor is recognized by USB. The only thing that I notice is when I plug the USB, A red light blinks once for just a short period less than a second right next to where the front camera is. Phone has no life. Tried everything I know to ressusitate the phone and it won't turn on, won't vibrate, and is not recognised by USB. Question is: Is it recoverable and if so, what should I do? Thanks in advance.
It can be recoverd until it vibrates
 
  • Like
Reactions: Erfan3030

Erfan3030

Member
Oct 18, 2017
13
0
0
Hi guys,
I have honor 3c-u10. last week, I see that it was not working. so I tried to flash it. I think I had a mistake. now, when I try to turn it on, just black screen and vibration.
I read a lot of ways on the internet and try them. but no progress.
I taught it is dead until now that I see this forum and I hope that I can bring it back.
I will be appreciated if you guys can help me...
 

hassanjavaid8181

Senior Member
Jan 9, 2016
3,029
1,226
113
Hi guys,
I have honor 3c-u10. last week, I see that it was not working. so I tried to flash it. I think I had a mistake. now, when I try to turn it on, just black screen and vibration.
I read a lot of ways on the internet and try them. but no progress.
I taught it is dead until now that I see this forum and I hope that I can bring it back.
I will be appreciated if you guys can help me...
Does it recognizing by PC??
 

hassanjavaid8181

Senior Member
Jan 9, 2016
3,029
1,226
113
do you mean by SPFT??
yes.
when I flash it in B320, the green cycle is shown, but still black screen and vibration.
I download official b110 and b127. I cant flash them. there are some errors at the end.
You flash b320 with spft?
Why not start with b108??
You can't flash b127 after flashing b320