Huawei Mate 10 Lite (RNE-L21C185B131) Stock Firmware Backup

Search This thread

Hamidmirza

Member
Aug 10, 2015
32
17
Hye everyone. I started a new thread name "Huawei Mate 10 Lite Stock Firmware Backup".
In previous days i wiped all my partitions like System,Boot,Cust,Product etc through TWRP Recovery unfortunately.
Beside this Huawei didn't release stock firmware of my device so my device didn't boot anymore and whenever i enter in the recovery mode it shows up a message on the top "no OS installed". Here i stucked badly because i had not made any backup of boot, system, product vendor etc so i took my friend's device which is also Huawei Mate 10 Lite, i unlocked its bootloader and flash TWRP Recovery and make a backup of whole OS and restore it in my device and my device successfully booted.

I also post link of backup folder of version RNE-L21C185B131.
https://drive.google.com/open?id=16soc6NiVwoV0nwlxwlSHBn6zP1-iAGbp
Also post link of TWRP Recovery Mate 10 Lite Edition which has all features enable,,,,,,,,see screenshots in attachment.
https://drive.google.com/open?id=1pOmDFqhjCOU_myrD_s5-jgrWZF7pg8nb
Now , here is the guide how to restore backup files from other phone.
1. Download the "Stock Firmware backup.zip" from given link
2. Download TWRP Recovery Mate 10 lite Edition from this link if you have not flash that one (Reply on thread if you didn't know how to flash TWRP Recovery.)
3. Now put that files extract from ZIP into external sdcard in TWRP/BACKUPS/"Your phone's Serial number"/Stock backup
4. Now insert sd card and enter into TWRP Recovery.
5. If you didn't know serial number of your phone just past it in your sdcard directory.
6. Then Go to 'Mount' section and tick all the options then go back and open 'Restore' tab and tick following option BOOT, CUST IMAGE, PRODUCT IMAGE, VENDOR IMAGE, VERSION and SYSTEM. and go ahead.
7. Wait sometime, as restoring takes couple of minutes then Reboot your Device and it is booted successfully.

Enjoy....!
Hit Thanks if its Helpful.
 
Last edited:

Peligrito2010

Member
Feb 20, 2018
6
3
Hi, my friend, I have an RNE-L03, which I brick, I managed to rescue it by installing the Rom from King Mezi, but I want to go back to the original firmware, you think I can use your backup on my device?
 

chimere2016

Senior Member
Feb 7, 2017
114
25
60
Kairouan
Hye everyone. I started a new thread name "Huawei Mate 10 Lite Stock Firmware Backup".
In previous days i wiped all my partitions like System,Boot,Cust,Product etc through TWRP Recovery unfortunately.
Beside this Huawei didn't release stock firmware of my device so my device didn't boot anymore and whenever i enter in the recovery mode it shows up a message on the top "no OS installed". Here i stucked badly because i had not made any backup of boot, system, product vendor etc so i took my friend's device which is also Huawei Mate 10 Lite, i unlocked its bootloader and flash TWRP Recovery and make a backup of whole OS and restore it in my device and my device successfully booted.

I also post link of backup folder of version RNE-L21C185B131.
https://drive.google.com/open?id=16soc6NiVwoV0nwlxwlSHBn6zP1-iAGbp
Also post link of TWRP Recovery Mate 10 Lite Edition which has all features enable,,,,,,,,see screenshots in attachment.
https://drive.google.com/open?id=1pOmDFqhjCOU_myrD_s5-jgrWZF7pg8nb
Now , here is the guide how to restore backup files from other phone.
1. Download the "Stock Firmware backup.zip" from given link
2. Download TWRP Recovery Mate 10 lite Edition from this link if you have not flash that one (Reply on thread if you didn't know how to flash TWRP Recovery.)
3. Now put that files extract from ZIP into external sdcard in TWRP/BACKUPS/"Your phone's Serial number"/Stock backup
4. Now insert sd card and enter into TWRP Recovery.
5. If you didn't know serial number of your phone just past it in your sdcard directory.
6. Then Go to 'Mount' section and tick all the options then go back and open 'Restore' tab and tick following option BOOT, CUST IMAGE, PRODUCT IMAGE, VENDOR IMAGE, VERSION and SYSTEM. and go ahead.
7. Wait sometime, as restoring takes couple of minutes then Reboot your Device and it is booted successfully.

Enjoy....!
Hit Thanks if its Helpful.

Bravo Bravo Bravo Hamidmirza and thanks
 
  • Like
Reactions: JAZZYBUTT999

shwan91

New member
Dec 15, 2012
2
0
hi bro

hello bro when i want to restore the backup the phone say unable to wipe product after that stop the recovery
please help bro
this is the image of restoring
77lvoQZ
 
Last edited:

KingOfMezi

Senior Member
Jul 6, 2017
380
805
Lima
@Hamidmirza
thanks for your good contribution, I need the data partition to be able to work in RNE-L21C185, see it a browser has to be root for this
route: data / hw_init
copy it to a folder and upload it to a server to download it
 

t1ps

New member
Mar 10, 2018
4
0
No bro, it cant b done without twrp.

What is condition of your phone?
I mean whats your problem with your mate 10 lite.

So i tried relocking my mate 10 lite, but on the factory reset stage it sits at 99% for hours. I tried turning it off and on again, the factory reset went all fine but when i try to boot into the system it only boots into Erecovery.
 

Hamidmirza

Member
Aug 10, 2015
32
17
So i tried relocking my mate 10 lite, but on the factory reset stage it sits at 99% for hours. I tried turning it off and on again, the factory reset went all fine but when i try to boot into the system it only boots into Erecovery.

Did you factory reset your phone using stock recovery or twrp recovery?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    Hye everyone. I started a new thread name "Huawei Mate 10 Lite Stock Firmware Backup".
    In previous days i wiped all my partitions like System,Boot,Cust,Product etc through TWRP Recovery unfortunately.
    Beside this Huawei didn't release stock firmware of my device so my device didn't boot anymore and whenever i enter in the recovery mode it shows up a message on the top "no OS installed". Here i stucked badly because i had not made any backup of boot, system, product vendor etc so i took my friend's device which is also Huawei Mate 10 Lite, i unlocked its bootloader and flash TWRP Recovery and make a backup of whole OS and restore it in my device and my device successfully booted.

    I also post link of backup folder of version RNE-L21C185B131.
    https://drive.google.com/open?id=16soc6NiVwoV0nwlxwlSHBn6zP1-iAGbp
    Also post link of TWRP Recovery Mate 10 Lite Edition which has all features enable,,,,,,,,see screenshots in attachment.
    https://drive.google.com/open?id=1pOmDFqhjCOU_myrD_s5-jgrWZF7pg8nb
    Now , here is the guide how to restore backup files from other phone.
    1. Download the "Stock Firmware backup.zip" from given link
    2. Download TWRP Recovery Mate 10 lite Edition from this link if you have not flash that one (Reply on thread if you didn't know how to flash TWRP Recovery.)
    3. Now put that files extract from ZIP into external sdcard in TWRP/BACKUPS/"Your phone's Serial number"/Stock backup
    4. Now insert sd card and enter into TWRP Recovery.
    5. If you didn't know serial number of your phone just past it in your sdcard directory.
    6. Then Go to 'Mount' section and tick all the options then go back and open 'Restore' tab and tick following option BOOT, CUST IMAGE, PRODUCT IMAGE, VENDOR IMAGE, VERSION and SYSTEM. and go ahead.
    7. Wait sometime, as restoring takes couple of minutes then Reboot your Device and it is booted successfully.

    Enjoy....!
    Hit Thanks if its Helpful.
    1
    Hye everyone. I started a new thread name "Huawei Mate 10 Lite Stock Firmware Backup".
    In previous days i wiped all my partitions like System,Boot,Cust,Product etc through TWRP Recovery unfortunately.
    Beside this Huawei didn't release stock firmware of my device so my device didn't boot anymore and whenever i enter in the recovery mode it shows up a message on the top "no OS installed". Here i stucked badly because i had not made any backup of boot, system, product vendor etc so i took my friend's device which is also Huawei Mate 10 Lite, i unlocked its bootloader and flash TWRP Recovery and make a backup of whole OS and restore it in my device and my device successfully booted.

    I also post link of backup folder of version RNE-L21C185B131.
    https://drive.google.com/open?id=16soc6NiVwoV0nwlxwlSHBn6zP1-iAGbp
    Also post link of TWRP Recovery Mate 10 Lite Edition which has all features enable,,,,,,,,see screenshots in attachment.
    https://drive.google.com/open?id=1pOmDFqhjCOU_myrD_s5-jgrWZF7pg8nb
    Now , here is the guide how to restore backup files from other phone.
    1. Download the "Stock Firmware backup.zip" from given link
    2. Download TWRP Recovery Mate 10 lite Edition from this link if you have not flash that one (Reply on thread if you didn't know how to flash TWRP Recovery.)
    3. Now put that files extract from ZIP into external sdcard in TWRP/BACKUPS/"Your phone's Serial number"/Stock backup
    4. Now insert sd card and enter into TWRP Recovery.
    5. If you didn't know serial number of your phone just past it in your sdcard directory.
    6. Then Go to 'Mount' section and tick all the options then go back and open 'Restore' tab and tick following option BOOT, CUST IMAGE, PRODUCT IMAGE, VENDOR IMAGE, VERSION and SYSTEM. and go ahead.
    7. Wait sometime, as restoring takes couple of minutes then Reboot your Device and it is booted successfully.

    Enjoy....!
    Hit Thanks if its Helpful.

    Bravo Bravo Bravo Hamidmirza and thanks
    1
    I successfully restored the backup through Twrp, but:
    - when I try to change the theme it doesn't apply any changes
    - when I take a screenshot, they always have a sort of weft (the same one that's on the wallpaper.
    -in settings, the "about phone" section is messed up. It shows wrong info (model, build number, android version, ram, internal storage and resolution)
    How can I fix all this?
    I noticed that my phone is RNE-L21C432B130 so, does someone have a stock Rom backup for this model?

    Bro you flased China version mistakenly..........i post backup files for C131(Asia) not for europe C432. I didn't try that is C131 backup works onC432 or not.