Huawei P10 Lite - Bricked Device - Phone Locked - FRP Lock

[tobelios]

Hello. I have Huawei P10 Lite and after installing a rom my device bricked and my bootloader locked. So, with PHONE Locked and FRP Locked I cannot flash twrp and rom. I tried DC-Unlocker but it didn't work. I paid it and nothing happened except that they took my money.. Any suggestions to what I can do in order to unlock my device or install a rom without bootloader? Please tell me there is something I could do, and fast. Thanks for your time and I hope that it is not the end of my phone..

 

[Ashle]

FRP remove

 

[Delinga]

FRP remove ...

Too bad that this only work if you are able to boot up and access the phone. And if you're able to do that, FRP unlock is a cakewalk anyway...

 

[nemanjsb]

You have custom recovery?

 

[tobelios]

You have custom recovery?

It only goes to eRecovery, but stucks there. I contacted DC Unlocker and they gave me back my credits, not my money.
My phone is locked and I need the unlock code for the bootloader so I could flash a costum rom. For some reason, their program doesn't give ME the option to read my code but in others it does. I am desperate and sad. I don't know what to do. My phone is f*cked, I don't know what to do.

 

[nemanjsb]

It only goes to eRecovery, but stucks there. I contacted DC Unlocker and they gave me back my credits, not my money.
My phone is locked and I need the unlock code for the bootloader so I could flash a costum rom. For some reason, their program doesn't give ME the option to read my code but in others it does. I am desperate and sad. I don't know what to do. My phone is f*cked, I don't know what to do.

Follow this instructions

 

[tobelios]

Follow this instructions

THANK YOU! Can you help in which files should I download in order for me not to make any mistake?
Found Phone : WAS-LX1A
Model : Huawei phone in fastboot mode
IMEI : (I will not show my IMEI public)
Serial NR. : (I will not show my Serial NR public)
Firmware : WAS-LX1AC432B198

In the search I found Warsaw-L01_C432B183_Firmware_Austria_Poland_Croatia_Romania_Macedonia_Serbia_Slovakia_Greece_Bul.. and update_WAS-L01A_C432B183_hw_eu.APP but not sure if they are the correct files. I live in Greece and according to my IMEI my phone was destined to Italy and was customized by Telecom. Is those the correct files? If they are not and somehow fails, will it cost my credits again or I will be able to try again without contacting them?

 

[Masmopar]

I have also had this problem.
Use dc and when frp is unlocked, disconnect your phone.
Use the service rom and your problem is solved.

 

[tobelios]

I have also had this problem.
Use dc and when frp is unlocked, disconnect your phone.
Use the service rom and your problem is solved.

My phone is bricked, I don't have installed any rom right now. And Bootloader - FRP are locked. What I need is, a sollution to either flash a rom without bootloader or to somehow read my unlock code for bootloader. Huawei used to provide the unlock code but in July 25th it stoped in order to provide more safety, but it seems like that they did more bad than good actually.

 

[Masmopar]

Use dc, when FRP turns green, stop dc with task manager.
Use hwota to install rom. That's how I succeeded.
unlock code can you buy for € 50.- ($55.-).
https://funkyhuawei.club/buycodes

 

[tobelios]

Use dc, when FRP turns green, stop dc with task manager.
Use hwota to install rom. That's how I succeeded.
unlock code can you buy for € 50.- ($55.-).
https://funkyhuawei.club/buycodes

FRP erase service WON'T remove Huawei ID and won't change FRP lock status on fastboot screen!

So, even if FRP is unlocked, bootloader will still be locked. So I won't be able to flash a rom.
(Also for the colours, they are already green now that they are locked..)

 

[Masmopar]

Buy a other phone.

 

[tobelios]

I followed the instructions of DC Unlocker and I tried to flash with DC Phoenix, but my phone ended up in ERROR MODE..
At this point I don't have any option left. After a bit, I figured I can still go to fastboot mode but phone and frp are still locked. And if I try to go to eRecovery it gets again in the ERROR MODE. Every step I make, it only makes it worse.... Latetly everything in my life goes to sh*t and nothing can go well.... Sorry for any bother I made in the forum.

 

[tobelios]

I fixed my phone. Now it is working with Stock Rom and System Updates are available.
Before I say how I fixed my phone for anyone with same problem out there, I am gonna inform you about my system info because it may be different for your phone.

My system info:
Phone: Huawei P10 Lite WAS-LX1A
Phone Model: Warsaw-L01A
Supported Country : Latvia, Lietuva, United Kingdom-Honor, Hrvatska, România, Norge, Magyarország, България, France, Belgique, Deutschland, Suomi, Danmark, Ireland, České, Österreich, Κύπρος, Sverige, Slovenia, Slovensko, Italia, Portugal, Polska, Suisse, Ελλάδα, España, Nederland, Estonia

So, this is how I fixed my phone:
1. Download Warsaw-TM001055_Board_software_general_Android_7.0_EMUI_5.1_05022DUU.dgtks
2. Flash Warsaw-TM001055_Board_software_general_Android_7.0_EMUI_5.1_05022DUU.dgtks with DC Phoenix in Advance Mode

This, fixed the ERROR MODE in phone and eRecovery and everything went to okay. No ERROR MODE.

After, that:

1. Download Warsaw-L01A_C432B179b_Firmware_Italy_Switzerland_Portugal_Netherlands_Germany_Nonspecific_Android7.0_EMUI5.1.APP
2. Download update_WAS-L01A_C432B179b_hw_eu.APP
3. Flash both files with DC Phoenix in Standard Mode.
5. Your phone is ready and working again with stock rom.

Link to the files you will find from DC Phoenix. It costs 15 credits to flash a file. Hope I helped everyone with the same problem.

 

[Delinga]

Hi,

old thread: I got the same issue, PHONE Locked and FRP Lock. And ofc it's soft bricked/stuck in neverending EMUI mode / Huawei eRecovery, trying to flash WAS-LX1A 8.0.0.376(C02)-FULL, rebooting and getting stuck again.

So there's no other solution than using DC Phoenix? Still?