Huawei P9 EVA-L09 FRP Bypass + Other models (free)

[brokeboy]

Its taken me a while to figure out a way to bypass the FRP (Factory Reset Protection) Lock on my Huawei EVA-L09 and do so while not bricking my device or installing shady software/roms so if this helps I hope you leave me a like and comment how long its taken you before you found this guide.

Its completely free as I refuse to pay money which I hope you appreciate as every other guide wants you to pay to unlock a device so no matter what level of skills you are this should help you to gain access to you're Huawei EVA-L09 and other models (I've also used this method on a Huawei P Smart (FIG) but this should also work on all the devices listed in the table below)

Device	Model	Bootloader
Huawei P8 Lite (2015)	ALE	Kirin 620
Huawei Y6II	CAM	Kirin 620
Honor 5C / 7 Lite	NEM	Kirin 65x (A)
Honor 7X	BND	Kirin 65x (A)
Honor 9 Lite	LLD	Kirin 65x (A)
Huawei MediaPad T5	AGS2	Kirin 65x (A)
Huawei Nova 2	PIC	Kirin 65x (A)
Huawei P10 Lite	WAS	Kirin 65x (A)
Huawei P20 Lite / Nova 3e	ANE	Kirin 65x (A)
Huawei P8 Lite (2017)	PRA	Kirin 65x (A)
Huawei P9 Lite	VNS	Kirin 65x (A)
Huawei Y9 (2018)	FLA	Kirin 65x (A)
Huawei MediaPad M5 Lite	BAH2	Kirin 65x (B)
Huawei Nova 2i / Mate 10 Lite	RNE	Kirin 65x (B)
Huawei P Smart 2018	FIG	Kirin 65x (B)
Honor 6 Plus	PE	Kirin 925
Huawei P8	GRA	Kirin 935
Honor 8 Pro / V9	DUK	Kirin 950
Honor 8	FRD	Kirin 950
Huawei P9 Standart	EVA	Kirin 950
Honor 9	STF	Kirin 960
Huawei Mate 9 Pro	LON	Kirin 960
Huawei Mate 9	MHA	Kirin 960
Huawei MediaPad M5	CMR	Kirin 960
Huawei Nova 2s	HWI	Kirin 960
Huawei P10	VTR	Kirin 960

• First download and extract the Android SDK Platform-Tools package for windows from -> https://developer.android.com/studio/command-line/adb
• Next download drivers from -> https://adb.clockworkmod.com/ and run .exe file
• Next go to -> https://github.com/mashed-potatoes/PotatoNV and read through the entire page and follow the steps to install HiSuite, test point drivers and latest version of PotatoNV and find out where you're test point are on you're device and learn how to use the tool

• Open PotatoNV and click disable FBlock and choose you're bootloader (refer to list on GitHub Repo) in my case for the Huawei EVA-L09 it was the Kirin 950 and follow the repo instructions to ground you're test point while inserting you're USB, now the target device field should show you're device then click start! and If you've followed the steps correctly then congrats you've generated a new bootloader code and got the following display.

• From the display write down the "New Unlock Code" + "Build number" for later

Now we need the firmware to flash

• Go to -> http://huawei-firmware.com/phone-list/ to find you're compatible firmware

My build number was "EVA-L09C02B363" so on the site I searched for that build number but found nothing so I removed 1 character from the end "EVA-L09C02B36" and found 2 results for "Huawei P9 EVA-L09C02B361 Firmware"

If you cant find a result keep removing 1 character from the end of you're build number until you can find the closet build to yours and Download it

• Boot phone into fastboot mode
• In the Android SDK Platform-Tools package folder hold In "CTRL + Shift" and Right click in the folder and click the option "open PowerShell window here"
• In PowerShell type the following command "./fastboot oem unlock YOUR_CODE_HERE"
• Press the volume key to select unlock bootloader on you're phone and press the power button (Now you've unlocked you're bootloader)
• Download the firmware and extract the files and move the entire Dload folder to an SDcard (rename the SDcard SDcard) and insert it into you're device
• Now boot the phone with both volume buttons pressed down and power button and let it install the new firmware

I personally had an error at 99% of install doing it this way so I had to manually flash each partition if you have the same issue then follow the steps

• Download the tool Huaweiupdateextract tool -> https://www.leakite.com/flash-huawei-ota-update-without-sdcard/

• And click "click", now browse for the update.app file inside the Dload folder and right click on the files and click extract all and save them into the Android SDK Platform-Tools package folder you extracted earlier
• Boot phone into fastboot mode

Now you need to manually flash every .img file you extracted to the corresponding partition, all the .img files are saved in CAPSLOCK and the corresponding partition you need to flash to is the file name in all lowercase minus the .img part so for example the file RECOVERY.img needs to be flashed to the recovery partition and USERDATA.img to userdata and so on

• In the same Powershell Window from earlier type "./fastboot flash *partition" "PARTITION.img" and replace partition with every img you extracted, example for USERDATA.img: "./fastboot flash userdata USERDATA.img"
• Some flash's may fail, just move on to the next
• Then type "./fastboot reboot"

And now skip through everything and access you're phone, I then personally booted my phone into Erecovery and clicked Install firmware and recovery and signed into my wifi after downloading I opened my phone and inserted my sim card (in my case it was lyca mobile and after the phone accepts the sim you will be prompted to take the system update, I flashed build EVA-L09C02B361 to my device but now I can update to my original build number EVA-L09C02B363.

Hopefully if you followed everything correctly you've just bypassed FRP.

You're welcome as someone who dosent have a lot to spend on tech I really value this sort of information and hopefully this full guide can help even a beginner gain access to there bricked phone.

Let me know if this helps!

 

[kalinx]

doesn't work on Huawei Y6II CAM-L21 ..

 

[brokeboy]

doesn't work on Huawei Y6II CAM-L21 ..

Did you ground the test point while clicking start?

 

[kalinx]

Did you ground the test point while clicking start?

yes, in many ways i try it but this doesn't work too

 

[brokeboy]

yes, in many ways i try it but this doesn't work too

Can you run it without Fblock and then run again with it ticked?

 

[kalinx]

Yes I was struggling with it yesterday all day, in many ways. Now I get off. I will buy Sony Xperia M4 aqua with very easy root, I get unlock code from Sony website. Damn you HUAWEI! :/

 

[brokeboy]

Yes I was struggling with it yesterday all day, in many ways. Now I get off. I will buy Sony Xperia M4 aqua with very easy root, I get unlock code from Sony website. Damn you HUAWEI! :/

Can you explain every step you did before to get to that point, also what's wrong with you're device?

 

[levis36]

Can this process work on Honor 10 col l29? He has kirin 970. Thank you.

 

[brokeboy]

Can this process work on Honor 10 col l29? He has kirin 970. Thank you.

If its not on the list then it isn't supported but I believe if you look through the repo maybe someone forked it or there might be an alternative... I typed in honor in the questions and found this but there could be more

 

[levis36]

I solved it by changing the motherboard. I bought a phone with a broken display, 4 €, I changed the card and it did not have a lock on the screen and I entered the settings, return to the factory settings and everything goes ok. The new motherboard has emui 10.0.0 4 / 64gb and the old one was emui 8.1 which I failed to unlock I don't know the specifications it had. I would have liked to unlock the other one can have 6 / 128g.

 

[brokeboy]

I solved it by changing the motherboard. I bought a phone with a broken display, 4 €, I changed the card and it did not have a lock on the screen and I entered the settings, return to the factory settings and everything goes ok. The new motherboard has emui 10.0.0 4 / 64gb and the old one was emui 8.1 which I failed to unlock I don't know the specifications it had. I would have liked to unlock the other one can have 6 / 128g.

Well done, that's good way to get past it... What phone did you take the motherboard from? Did you not find any info on how to use the bootloader unlocker with you're Honor 10 COL-L29 (Kirin 970)?

 

[levis36]

I tried 3 methods and none of them worked, they were all restricted, I got to a point and I couldn't move on.

 

[juanmicr]

Hi, I have a mate 9 with FRP and Bootloader locked, and when I try to unlock bootloader via fastboot, I have a warning telling that FRP needs to be unlocked first. Do you have any suggestiong?

 

[denmes]

Well, I did it at last After I have done this here and got no FRP bypass, I continued to google because this is weird, being able to run ADB/Fastboot commands, but unable to remove damn FRP. I have found this tool and it worked:

Download Huawei FRP and ID remove Tool For PC

Download Huawei FRP and ID remove Tool For PC if you want to bypass FRP lock google account from Huawei/Honor mobile

huaweiflash.com

So I can now thank the author for this guide, although unclear in some parts, then it has led finally to success. I have spent a couple of hours yesterday trying that bypass from the device (each and every method to start Youtube/Chrome/Maps/Google vie Talkback is already blocked as of now). Then a couple of hours for this guide. I could have purchased me an open phone instead of cracking this one but I wanted to play with some Huawei without having to pay anything.

There were unclear point in the guide, I elaborate
- to start fastboot mode: keep Volume down pressed and connect USB cable.
- you don't need specifically powershell, command line works as well
- the reflash is done from 32GB FAT32 formatted card named SDCARD which contained the unpacked folder dload with firmware files (SDCARD:/dload/<files>)

---initial comment---
EVA-L09 here.
Well, the procedure as described does not remove FRP lock.

PotatoNV worked, oem unlock command went through as well, but... Fastboot screen shows "FRP Lock" in green before the "oem unlock" command run; after the command and subsequent lowlevel reset; and after reflash.
The device asks the Google account after boot the same way as before the unlock/reflash.

Maybe the cumbersome way how you reflashed the phone is instrumental to enable FRP bypass (I have found exactly the same software build and my phone updated normally to 100% from SD card).

 

[youssef alonso]

I have a P9 EVA-L09 device that has FRP locked. i try this method without PC and its work for me