• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

HwOTA7 + HwOTA8 for Honor 6X

Search This thread

vovan1982

Senior Member
Jul 18, 2017
69
92
Rostov-on-Don
HwOTA7 + HwOTA8 for Honor 6X​
1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
and will be repack firmware (only HwOTA8)!!!
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.

PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"

HwOTA_BLN.zip

Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
If you like my work, you can thank TeamMT PayPal

PPS: Sorry for my English!!!
 
Last edited:

Jax

Senior Member
Jul 3, 2017
513
128
They are all China firmware, no other location

Sent from my BLN-L22 using Tapatalk
 

natsusii

Senior Member
May 20, 2017
114
12
Help me. I was debranded to China ver and can not rebrand to My BLL-l22
 

Attachments

  • IMG_20180520_200638.jpg
    IMG_20180520_200638.jpg
    135.5 KB · Views: 1,926

Jax

Senior Member
Jul 3, 2017
513
128

Ramesh006

Senior Member
Jan 15, 2014
439
148
Xiaomi Poco X3 Pro
Can't call. Not sounds. And can't flash TWRP or rollback to My variants

this what I'm telling everyone on that telegram group to stop upgrading to oreo in this method no one was listing to me now everyone complaining about missing imei no and can't go back to emui. the op should warn about missing imei so you can't make calls. this thread is not noob friendly.
 

natsusii

Senior Member
May 20, 2017
114
12
this what I'm telling everyone on that telegram group to stop upgrading to oreo in this method no one was listing to me now everyone complaining about missing imei no and can't go back to emui. the op should warn about missing imei so you can't make calls. this thread is not noob friendly.
Nope bro. Imei working fine but have problem with calling. I can make to call but it has a little problem. Not sounds, not TWRP and can't rollback are big problems
 
Last edited:

Jax

Senior Member
Jul 3, 2017
513
128
Nope bro. Imei working fine but have problem with calling. I can make to call but it has a little problem. Not sounds, not TWRP and can't rollback are big problems
Use hwota 8 to rollback to emui 5 and use the same Chinese version of emui 5 and then debrand to ur original device

Sent from my BLN-L22 using Tapatalk
 
  • Like
Reactions: natsusii

Jax

Senior Member
Jul 3, 2017
513
128
  • Like
Reactions: natsusii

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    HwOTA7 + HwOTA8 for Honor 6X​
    1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
    2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
    3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
    4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
    5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
    - update_data_full_public.zip to update_data_public.zip
    - update_full_....zip to update_all_hw.zip
    - update.zip don't rename
    and will be repack firmware (only HwOTA8)!!!
    6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
    At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
    7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.

    PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"

    HwOTA_BLN.zip

    Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
    HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
    If you like my work, you can thank TeamMT PayPal

    PPS: Sorry for my English!!!
    3
    You know what, this is an useful tool and it needs to be shared to other users who may need it. So with all the credits to @vovan1982 and TeamMT, here's a mirror valid forever https://www.dropbox.com/s/via9iigwa5q37rf/HWOTA_BLN_Eng.zip

    @shashank1320 @boubaka there you go guys
    2
    Yes twrp-3.1.1-0-berlin.img
    I am sorry, I am driving.. just give me 20 minutes

    Sent from my BLN-B56 using Tapatalk

    ---------- Post added at 08:45 AM ---------- Previous post was at 08:39 AM ----------

    I am sorry, I am driving.. just give me 20 minutes

    Sent from my BLN-B56 using Tapatalk
    Now download HuRupdater 0.3 zip file from below link

    HuRUpdater_0.3.zip

    http://www.mediafire.com/file/ze5z78dq7zu3sxb/HuRUpdater_0.3.zip

    Sent from my BLN-B56 using Tapatalk

    ---------- Post added at 08:57 AM ---------- Previous post was at 08:45 AM ----------

    I am sorry, I am driving.. just give me 20 minutes

    Sent from my BLN-B56 using Tapatalk

    ---------- Post added at 08:45 AM ---------- Previous post was at 08:39 AM ----------

    Now download HuRupdater 0.3 zip file from below link

    HuRUpdater_0.3.zip

    http://www.mediafire.com/file/ze5z78dq7zu3sxb/HuRUpdater_0.3.zip

    Sent from my BLN-B56 using Tapatalk
    Now take one sd card the copy & RENAME all the downloaded files as below

    update_data_full_public.zip to update_data_public.zip
    - update_full_....zip to update_all_hw.zip
    - update.zip don't rename


    And also copy HuRUpdater_0.3.zip.


    Note: you must rename those 3 downloaded update files as I mentioned above and copy those 3 update file as well as HuRUpdater_0.3.zip in the same folder. (Folder name could be anything).

    Sent from my BLN-B56 using Tapatalk

    ---------- Post added at 09:03 AM ---------- Previous post was at 08:57 AM ----------

    I am sorry, I am driving.. just give me 20 minutes

    Sent from my BLN-B56 using Tapatalk

    ---------- Post added at 08:45 AM ---------- Previous post was at 08:39 AM ----------

    Now download HuRupdater 0.3 zip file from below link

    HuRUpdater_0.3.zip

    http://www.mediafire.com/file/ze5z78dq7zu3sxb/HuRUpdater_0.3.zip

    Sent from my BLN-B56 using Tapatalk

    ---------- Post added at 08:57 AM ---------- Previous post was at 08:45 AM ----------

    Now take one sd card the copy & RENAME all the downloaded files as below

    update_data_full_public.zip to update_data_public.zip
    - update_full_....zip to update_all_hw.zip
    - update.zip don't rename


    And also copy HuRUpdater_0.3.zip.


    Note: you must rename those 3 downloaded update files as I mentioned above and copy those 3 update file as well as HuRUpdater_0.3.zip in the same folder. (Folder name could be anything).

    Sent from my BLN-B56 using Tapatalk
    Last step..

    After copying and renaming files as I suggested above in memory card.

    Insert card in your phone.
    Boot into twrp.
    Navigate to the folder in sdcard where you have copied hurupdater & 3 update files.

    Select HuRUpdater_0.3.zip and flash it

    Wait for some time. HuRUpdater_0.3 will do the rest automatically.
    After finishing flashing, your phone would restart itself and boots to stock EMUI 5.

    Please be patience on first boot because device will take longer time to boot.



    Sent from my BLN-B56 using Tapatalk

    ---------- Post added at 09:21 AM ---------- Previous post was at 09:03 AM ----------

    I am sorry, I am driving.. just give me 20 minutes

    Sent from my BLN-B56 using Tapatalk

    ---------- Post added at 08:45 AM ---------- Previous post was at 08:39 AM ----------

    Now download HuRupdater 0.3 zip file from below link

    HuRUpdater_0.3.zip

    http://www.mediafire.com/file/ze5z78dq7zu3sxb/HuRUpdater_0.3.zip

    Sent from my BLN-B56 using Tapatalk

    ---------- Post added at 08:57 AM ---------- Previous post was at 08:45 AM ----------

    Now take one sd card the copy & RENAME all the downloaded files as below

    update_data_full_public.zip to update_data_public.zip
    - update_full_....zip to update_all_hw.zip
    - update.zip don't rename


    And also copy HuRUpdater_0.3.zip.


    Note: you must rename those 3 downloaded update files as I mentioned above and copy those 3 update file as well as HuRUpdater_0.3.zip in the same folder. (Folder name could be anything).

    Sent from my BLN-B56 using Tapatalk

    ---------- Post added at 09:03 AM ---------- Previous post was at 08:57 AM ----------

    Last step..

    After copying and renaming files as I suggested above in memory card.

    Insert card in your phone.
    Boot into twrp.
    Navigate to the folder in sdcard where you have copied hurupdater & 3 update files.

    Select HuRUpdater_0.3.zip and flash it

    Wait for some time. HuRUpdater_0.3 will do the rest automatically.
    After finishing flashing, your phone would restart itself and boots to stock EMUI 5.

    Please be patience on first boot because device will take longer time to boot.



    Sent from my BLN-B56 using Tapatalk
    First flash oeminfo file with twrp which u hv downloaded.
    Then follow all the above steps which I have mentioned

    Sent from my BLN-B56 using Tapatalk
    1
    They are all China firmware, no other location

    Sent from my BLN-L22 using Tapatalk

    Update Android 8.0.0 For Honor 6X
    Compatible With Any Version And Compilation
    They Can Test The Firmware BLN-AL10C00B508- (8.0.0)
    The Tool Automatically Changes Brand
    And Flashes The Oeminfo and The Firmware :good:
    1
    Can we iclude bll-l21