I Cant install twrp on my moto g6 plus!

[Unknown_PL]

Hello every one!

i cant install my twrp and i need help

C:\Users\admin\OneDrive\Desktop\Minimal ADB and Fastboot>fastboot flash recovery twrp.img
(bootloader) slot-suffi: not found
target reported max download size of 536870912 bytes
sending 'recovery' (29252 KB)...
FAILED (remote: unknown command)
finished. total time: 0.003s

the file what i used
https://eu.dl.twrp.me/evert/twrp-3.2.3-0-evert.img.html (i renamed file name to twrp.img)

UPDATE!!!!!!!!
i have boot file but i cant install twrp permanently

UPDATE 2!!!!!!!
my computer does not recognize my phone

 

[ze7zez]

Install LineageOS on evert | LineageOS Wiki

wiki.lineageos.org

I don't have the device, but the manual says to flash to the boot partition, not to recovery.

 

[Unknown_PL]

Install LineageOS on evert | LineageOS Wiki

wiki.lineageos.org

I don't have the device, but the manual says to flash to the boot partition, not to recovery.

ok i will try

 

[chrysopra]

Seems you have downloaded the website instead of the recovery
(Therefore the ending with *.html. Changing the filename won't change the filetype...)
On your mentioned website, click on the download-link which is named

Download twrp-3.7.0_9-0-evert.img​

Now you should get a file, which is really a *.img

 

[Unknown_PL]

Install LineageOS on evert | LineageOS Wiki

wiki.lineageos.org

I don't have the device, but the manual says to flash to the boot partition, not to recovery.

it didnt work

 

[Unknown_PL]

Seems you have downloaded the website instead of the recovery
(Therefore the ending with *.html. Changing the filename won't change the filetype...)
On your mentioned website, click on the download-link which is named

Download twrp-3.7.0_9-0-evert.img​

Now you should get a file, which is really a *.img

i can just delete ".html" in my link or add it to yours so tell me how does it works?

just saying

 

[10Maximus10]

For me the easiest way to install twrp and not break anything is to download the installer zip and img rename the img to twrp.img then copy the installer zip to sd card and use "fastboot boot twrp.img" while in fastboot then click on install and install the zip.

 

[chrysopra]

Perhaps you could try downloading fom an alternative site:

Download TWRP for evert

Download TWRP Open Recovery for evert

dl.twrp.me

I wonder, if you got a complete file. Download-size is 32.5 MB. Sending recovery command gave a lower value (29252 KB) . Maybe itś correct and there is some file-overhead, but itś worth a try...?

 

[Unknown_PL]

For me the easiest way to install twrp and not break anything is to download the installer zip and img rename the img to twrp.img then copy the installer zip to sd card and use "fastboot boot twrp.img" while in fastboot then click on install and install the zip.

i tryed to boot twrp but it didnt work

 

[ze7zez]

i tryed to boot twrp but it didnt work

Uninstall Minimal ADB and Fastboot, check if you have unlocked the bootloader and use >Google platform-tools<.

In addition to the comment "does not work", include the results of your commands.
Nobody but you can see them.

 

[Unknown_PL]

Hello every one!

i cant install my twrp and i need help

Yeah flashing twrp on boot worked, but now i cant turn on system

 

[chrysopra]

I recently ran into a similar situation. Try booting into recovery. In TWRP check if the Folder "data" is mounted. On my device, the 3.7.0 had problems. Formatting data as ext2 and back to ext4 made it readable, although of course formatting deleted all data. That worked until the next boot...

Solution was, to flash an older version of TWRP (3.2.x), afterwards it could be reflashed with the most recent version which now worked without problems.

Also, on some systems, if you flash TWRP once and try to reboot into System, the boot partition is being "repaired" by your system an TWRP is gone...

 

[Unknown_PL]

I recently ran into a similar situation...

then what i need to do?

use 3.2.3-0 and flash it to the boot?

 

[chrysopra]

Exactly. Flash 3.2, reboot into recovery. Within TWRP you can mount USB drive, which lets you easy install anything else. (TWRP 3.7, root, ROM...)

 

[WoKoschekk]

use 3.2.3-0 and flash it to the boot?

Did you ever heard of A/B slots? The Moto G6+ uses A/B slots and does not have a partition /recovery. Of course there is a recovery but it 's merged in the boot.img. So the boot.img is able to boot into recovery and also into system.

Your TWRP image is recovery only and isn't able to boot into system!

***

What will happen when flashing TWRP to partition /boot?
In that case your boot.img = twrp.img and will only boot into recovery.

How to install TWRP permanently on your device?
First of all you should have a look at https://twrp.me/motorola/motorolamotog6plus.html
TWRP provides an installation guide for every device and it´s recommended to follow these steps.

***

Here´s a more detailed guide:

1. In your case you have to restore the boot.img since it got overwritten by flashing your twrp.img to /boot.
If available use a backup of /boot. Otherwise flash the stock boot.img from your current running firmware version. Firmware builds can be found here:

lolinet mirrors - firmware, software, iso etc.

lolinet mirrors - powered by h5ai

mirrors.lolinet.com

(take care of your software channel, i.e. RETUS)

*** Be aware that by flashing your stock boot.img Magisk will be deinstalled from ***
your device and as a result of this you will LOOSE ROOT ACCESS!! ​

2. Run
fastboot boot <TWRP.IMG>

3. On TWRP main screen go to Advanced => Install Recovery Ramdisk and pick the twrp.img:

 

[Unknown_PL]

Did you ever heard of A/B slots? The Moto G6+ uses A/B slots and does not have a partition /recovery. Of course there is a recovery but it 's merged in the boot.img...

Yeah I think that will work but you need other link beauce that one twrp link is not working

Can I try it on normal evert twrp link?
And what one folder (from lolnet) should I pick?

 

[WoKoschekk]

Yeah I think that will work but you need other link beauce that one twrp link is not working

It's fixed.

And what one folder (from lolnet) should I pick?

It depends on your software channel:
RETAIL = general software build, w/o any region
RETUS = builds for U.S. region
RETIN = builds for India region
...and so on.
Beside that, there are also builds for carrier branded phones.

To find your software channel:

a) Open a terminal app and run
getprop ro.carrier

b) settings > about the phone > software channel

c) fastboot getvar all has also an entry for that, but I don't know exactly what name it is.

d) the specific model no.: XT1926-???
The last digit depends on your software channel.

 

[Unknown_PL]

It's fixed.



It depends on your software channel...

Well I booted twrp and install recovery rom but what file from lolnet should I pick i know what folder but where are 4 files and I don't know what I need to do

 

[WoKoschekk]

but where are 4 files and I don't know what I need to do

I don't know what you mean. What folder? Which 4 files? The downloaded firmware is a ZIP file with one folder inside. Inside that folder are more than 20 files.

 

[Unknown_PL]

I don't know what you mean. What folder? Which 4 files? The downloaded firmware is a ZIP file with one folder inside. Inside that folder are more than 20 files.

sorry i mean there not were and i used RETEU and there is 5 files