I install wrong rom - Xperia mini - Fix NOW !

[Shrihari007]

try flashing only the .62 firmware as soon as u flash the wrong rom...it worked for me

 

[aghsadegh]

Plz help i'v installed a wrong rom (blue ice 4 for xperia pro "not xperia mini pro" ) on my st15i and now it dosenot work at all
i tried all the method even i change my touch hardware but it steel dosn't work plz help me

 

[LJegenda]

Plz help i'v installed a wrong rom (blue ice 4 for xperia pro "not xperia mini pro" ) on my st15i and now it dosenot work at all
i tried all the method even i change my touch hardware but it steel dosn't work plz help me

hi! reinstall the old/stock rom (un-brick) you will find guides on XDA

 

[aghsadegh]

hi! reinstall the old/stock rom (un-brick) you will find guides on XDA

what do u mean by "un-brick"?
i've already reinstalled stock rom but touch dosen't work
i tried all method (hybrom, wrong rom ,....)

 

[mnishamk]

Try the touchscreen unbrick guide in general stickies

Sent from my SK17i using xda premium

 

[aghsadegh]

Try the touchscreen unbrick guide in general stickies

Sent from my SK17i using xda premium

Try the touchscreen unbrick guide in general stickies?
sorry what? where?

 

[mnishamk]

Ok I'll break it down for you, this is q and a section.
Go back and goto general section, there would be some stickied threads there, one of them is "blah unbrick touch blah" by mihann. Give it a read

Sent from my SK17i using xda premium

 

[UchihaOcioso]

How rooting if I can not use the touch to set debug mode to install the CWM?

 

[aghsadegh]

How rooting if I can not use the touch to set debug mode to install the CWM?

2 Ways available:
1). unlock ur bootloader and flash a custom Kernel (Ex."rage kernel")
2).turn on ur phone , plug a mouse(wireless) with usb on to go ,by mouse go to setting and tik Usb debugging and then instal cwm

 

[em069]

hi
i install overoid rom on experia mini
this base band rom is of xperia arc.it work good.but i flash wrong rom .now my touch not working
and model of my mobile was lt15i.do any work but my tuoch not work.help me.sorry for bad english

 

[king40]

try flashing only the .62 firmware as soon as u flash the wrong rom...it worked for me

please give download link .62 firmware for xperia mini :crying:

my mini touch not working:crying:

 

[LJegenda]

hello!

download drivers and flashtool

http://forum.xda-developers.com/showpost.php?p=27376024&postcount=3 <- these are the firmwares download one for your phone, and put it in "flashtool->ftf" folder

start flashtool, select a lightning on the top left, select flashmode, select your firmware and follow the instructions

 

[Razalie81]

i fix my st15i twice...touchscreen.. try this solution..

I have my st15i repair for the second time .. Simple and effective .. simple ..!!! I combined all these ideas all the friends here ..


-STEP 1: Install the lastest firmware .62 for st15i. - Use Flashtool and flash gb Rage Kernel v2.7

-STEP 2: Then install zip from CM via hybrom_v10. for minipro (sk17i) reboot .. wait until your phone on .. and turn back to the CWM install minihybrom_v12.zip (st15i) ... (Do this two times) check if your phone is on .. make sure you're free to open the slide key on your phone ... it means that your phone can be repaired (touchscreen)

STEP-3:
1. I Used gb.62 Using flash firmware tools
2. Rage gb flash kernel
3. 202 Ultimate HD flash custom rom
4. In the aroma, i choosed lww device
5. Got bootlop (i pull up the battrey)
6. Using flashtool, i flash GB 62.firmware fw
7. Booting to home and taadaaa: beer: everything goes normal just like new again.
100% responsive: thumbup:

these are the ideas of all the friends who are here and trying to repair the phone at no cost ... like me ... I hope you're all satisfied what I mentioned above .. and this is the best way to (xperia mini st15i)

 

[kieuson93]

how do that with my xmp sk17i

 

[tugs0109]

I have my st15i repair for the second time .. Simple and effective .. simple ..!!! I combined all these ideas all the friends here ..


-STEP 1: Install the lastest firmware .62 for st15i. - Use Flashtool and flash gb Rage Kernel v2.7

-STEP 2: Then install zip from CM via hybrom_v10. for minipro (sk17i) reboot .. wait until your phone on .. and turn back to the CWM install minihybrom_v12.zip (st15i) ... (Do this two times) check if your phone is on .. make sure you're free to open the slide key on your phone ... it means that your phone can be repaired (touchscreen)

STEP-3:
1. I Used gb.62 Using flash firmware tools
2. Rage gb flash kernel
3. 202 Ultimate HD flash custom rom
4. In the aroma, i choosed lww device
5. Got bootlop (i pull up the battrey)
6. Using flashtool, i flash GB 62.firmware fw
7. Booting to home and taadaaa: beer: everything goes normal just like new again.
100% responsive: thumbup:



thanks Razalie81. My touch screen is now working!

 

[officialavram]

-deleted-

 

[Mitsink]

hybrom v10 mini pro link

Same prob i found a link and i share it mediafire i know ppl searching for this sorry if is not allowed

 

[Mitsink]

I have my st15i repair for the second time .. Simple and effective .. simple ..!!! I combined all these ideas all the friends here ..


-STEP 1: Install the lastest firmware .62 for st15i. - Use Flashtool and flash gb Rage Kernel v2.7

-STEP 2: Then install zip from CM via hybrom_v10. for minipro (sk17i) reboot .. wait until your phone on .. and turn back to the CWM install minihybrom_v12.zip (st15i) ... (Do this two times) check if your phone is on .. make sure you're free to open the slide key on your phone ... it means that your phone can be repaired (touchscreen)

STEP-3:
1. I Used gb.62 Using flash firmware tools
2. Rage gb flash kernel
3. 202 Ultimate HD flash custom rom
4. In the aroma, i choosed lww device
5. Got bootlop (i pull up the battrey)
6. Using flashtool, i flash GB 62.firmware fw
7. Booting to home and taadaaa: beer: everything goes normal just like new again.
100% responsive: thumbup:

these are the ideas of all the friends who are here and trying to repair the phone at no cost ... like me ... I hope you're all satisfied what I mentioned above .. and this is the best way to (xperia mini st15i)

Can you please give me a download link for hybrom v10 mini pro? cuz that links i found on google is not mention nothing for what device is it.. So please if anyone have a link to download hybrom v10 for sk17 pm me or post it :highfive:

 

[Razalie81]

sorry man.. its for xperia st15i only.. this step is very important

-STEP 2: Then install zip from CM via hybrom_v10. for minipro (sk17i) reboot .. wait until your phone on .. and turn back to the CWM install minihybrom_v12.zip (st15i) ... (back again to cwm do this two times ok) check if your phone is on .. make sure you're free to open the slide key on your phone ... it means that your phone can be repaired (touchscreen)

 

[mhmtrk]

sorry man.. its for xperia st15i only.. this step is very important

-STEP 2: Then install zip from CM via hybrom_v10. for minipro (sk17i) reboot .. wait until your phone on .. and turn back to the CWM install minihybrom_v12.zip (st15i) ... (back again to cwm do this two times ok) check if your phone is on .. make sure you're free to open the slide key on your phone ... it means that your phone can be repaired (touchscreen)

Hi,
once sorry for my bad english.
I flashed the wrong rom(CandyRomv5 for xperia mini pro) on my ST15i. And my touchscreen is now broken.
I have tried many methods on this forum. But it still does not work.
I have tried all the methods in this thread.