I fail to find my SD Card adapter to write the img so I'll have to grab one tomorrow and attempt it. If anyone successfully downgrades please let us know though!
Hello,after 7 days of working i develop unbricker for this phone !!!
this unbricker can repair bricked i605 phone only!
i repair my i605 phone wrongly flashed whit n7100 firmware.
i hope this info help meny people whit bricked phone and wrongly flashed too like me
instruction:
1. disassemble phone
2. find resistor located on picture
3. better make switch i use iphone home button
4. prepare sdcard (i use 2 gb sdcard and write with any know img writer. i use winhex to write img)
5. insert sdcard to phone and conect lcd
6. conect POWERED OFF phone to power supply
7. Short resistore (as i say before i use iphone home button)
8. Turn on the phone, and REMOVE THE SHORT between 3 to 6 seconds
9. After 5 seconds, you can see message on the LCD boot recovery was succeeded
10. assemble phone
11. u can full flash your phone
VRALJB unbricker (old bootloader)
i605 unbrick sdcard.rar
MJ9 unbricker
i605 mj9.rar
XDA:DevDB Information
Unbricker, a Tool/Utility for the Verizon Samsung Galaxy Note II
Contributors
KOBOL
Version Information
Status: Testing
Created 2014-01-18
Last Updated 2014-01-21
Okaaay ! problem solved, i shouldn't have removed the SD Card ! my i605 is BACK !!make mj9 unbricker and retry flash whit sd card.
u try downgrade or unbrick?Okaaay ! problem solved, i shouldn't have removed the SD Card ! my i605 is BACK !!
THANK YOU SO MUCH !!!! Kobol ! :good: :good: :good:
I was woundering can this work to flash back to 4.1.2 with old bootloader from 4.3 ota ?
Sent from my SCH-I605 using xda app-developers app
i hope it's work without bricking.I'm pissed that my bootloader is locked, lets test this thing out.
I am currently on 100% stock 4.3, no root, locked bootloader. Should I brick before trying this or do you think it will work without bricking first?
Unbrick, the first file, not mj9,u try downgrade or unbrick?
Ok so let me just make sure i follow. Based off of what you're saying, this is the method to unlock the bootloader:Unbrick, the first file, not mj9,
from N7100 @ 4.3 i went to a fully unlocked i605 4.3 !!! i had the bad idea of reflashing after an error with CASUAL, now i'm stuck with a locked i605 @ 4.3, i don't know what happened exactly but thanks to the unbricker by Kobol i had an unlocked i605 bootloader @ 4.3, i ruined it, hopefully there will be a new unlock method. :good: :good:
Ok so let me just make sure i follow. Based off of what you're saying, this is the method to unlock the bootloader:
Flash N7100 4.3
Follow unbrick procedures using file #1 in this thread
Flash i605 4.3
Just looking to understand what you did, your last post is a little jumbled up and a little hard to follow.
Sent from my MB886 using xda app-developers app
Ok,Ok so let me just make sure i follow. Based off of what you're saying, this is the method to unlock the bootloader:
Flash N7100 4.3
Follow unbrick procedures using file #1 in this thread
Flash i605 4.3
Just looking to understand what you did, your last post is a little jumbled up and a little hard to follow.
Sent from my MB886 using xda app-developers app
Ok,
i had i605 @ 4.1.2 , i rooted it and unlocked it using CASUAL, after that i made the error of flashing it with N7100 @ 4.3 firmware, it worked but no Card SIM were detected since it's not the same modem, it won't accept i605's firmware neither its pit file, after a long struggle i've found Kobol's i605 unbrick method thank god !! i flashed using the i605 stock ROM @ 4.3 with it's PIT file and booom :fingers-crossed: ! i had my i605 fully unlocked @ 4.3 . after that i've tried to install a custom ROM, my attempts failed and my device softbricked after a CASUAL error, i reflashed, unfortunatly my system now is official and Locked @4.3 !! :crying:
Not true. I could not jig my device it was dead. Would not start.... and you really get stuck you can buils a jig or buy one and start odin with that.